Shenzhen EasyDetek Technology Co.,Ltd EDC212S EDC212S-A EDC212S-B EDC212S-C -1Address: Room 402, Building B, Hangcheng Industrial Zone, Chentian, Xixiang Street, Baoan District, Shenzhen Phone: 0755-27788421 Website: http://www.easydetek.
EDC212S Shenzhen EasyDetek Technology Co.,Ltd product description ■ The shell is made of flame-retardant materials, with a fire rating of V-0; ■ Patented antenna design, super anti-interference; digital radar chip, good consistency; ■ Not affected by temperature, humidity, air flow, dust, noise, brightness, etc.; ■ Meet the requirements of environmental protection. Electrical properties Transmit frequency 5.
Shenzhen EasyDetek Technology Co.
Shenzhen EasyDetek Technology Co.,Ltd EDC212S Fourth place: photosensitive threshold setting 4 25Lux ON Disable - When the ambient illuminance value is lower than the set valve, an object moves in the sensing area.
Shenzhen EasyDetek Technology Co.,Ltd EDC212S EDC212S-C Pin Pin Description L-out Fire wire out N-out Zero line out L-in Fire wire in N-in Zero line in -5Address: Room 402, Building B, Hangcheng Industrial Zone, Chentian, Xixiang Street, Baoan District, Shenzhen Phone: 0755-27788421 Website: http://www.easydetek.
Shenzhen EasyDetek Technology Co.,Ltd EDC212S Infrared remote control settings 100%: 4-6m 75%: 3-4.5m 50%: 2.5-4m 25%: 1.5-2m 10s: select time 10s 30s: select time 30s 1min: select time 1min Turn on the photosensitive function Turn off the photosensitive function 30Lux 15Lux Product size chart -6Address: Room 402, Building B, Hangcheng Industrial Zone, Chentian, Xixiang Street, Baoan District, Shenzhen Phone: 0755-27788421 Website: http://www.easydetek.
Shenzhen EasyDetek Technology Co.,Ltd EDC212S-A Unit: (mm) EDC212S-B Unit: (mm) EDC212S -7Address: Room 402, Building B, Hangcheng Industrial Zone, Chentian, Xixiang Street, Baoan District, Shenzhen Phone: 0755-27788421 Website: http://www.easydetek.
Shenzhen EasyDetek Technology Co.
Shenzhen EasyDetek Technology Co.
Shenzhen EasyDetek Technology Co.,Ltd EDC212S Detection diagram (distance can be adjusted according to actual application) Detection sensitivity gear: Ceiling installation diagram Precautions 1. When installing the product, the antenna board is required to maintain a certain height from the metal plane. It is recommended that the antenna board be kept at a distance of 5-12mm from the metal plane. It should not be close to or touch the metal plane, otherwise the product may not work properly! 2.
EDC212S Shenzhen EasyDetek Technology Co.,Ltd interfere with the normal radiation of the antenna, causing false alarms or changing the sensing range; 8. If the microwave sensor and wireless communication module (NB, Bluetooth, WIFI, 2.4G module) coexist in application, the distance between the antenna of the Internet of Things module and the antenna of the microwave module should be increased in space.
EDC212S Shenzhen EasyDetek Technology Co.,Ltd Configuration version description 【hardware】: 【software】: History revision record version time description Remarks V1.0 2021-04-08 first edition - - 12 Address: Room 402, Building B, Hangcheng Industrial Zone, Chentian, Xixiang Street, Baoan District, Shenzhen Phone: 0755-27788421 Website: http://www.easydetek.
Shenzhen EasyDetek Technology Co.,Ltd EDC212S Federal Communications Commission (FCC) Compliance Statement for USA This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. could void the user's authority to operate this equipment. part 15 of the FCC Rules.