KODAK Baby Video Monitor / M240 Monitor every moment. Record every memory. The recordable KODAK Baby Video Monitor–from the moment you press Record, you get up to 20 seconds of previous action. You’ll always capture memories from the moment they start. Attach gift card here User guide www.kodak.com For help: www.kodak.
Eastman Kodak Company Rochester, New York 14650 © Kodak, 2011 All screen images are simulated. Kodak is a trademark of Eastman Kodak Company.
Product features What’s in the box: Antenna On/Off Antenna IR LEDs LCD Lens OK/Menu Microphone On/Off Navigation Record Review SD/SDHC card slot Speaker USB Port C10 Camera M240 Monitor You can also purchase a charging dock for your monitor at the KODAK Store. Go to (www.kodak.com/go/accessories). Volume (+ / -) Stand / Belt Clip* Monitor (side view) Also included: Rechargeable battery pack (2) AC adapters: A longer, 11.8 ft (3.6 m) cord for the camera, and a shorter, 6 ft (1.
1 Product warning CAUTION: Strangulation Hazard–do not place the camera in the crib or within 3 ft (1 m) of the baby. ■ You must regularly monitor your baby’s activity. This product cannot replace responsible, adult supervision. This product will not alert parents to a baby’s silent activities. ■ Never use extension cords with AC adapters. Use the AC adapters provided. ■ When an AC adapter is plugged into an electrical outlet, do not touch the exposed end.
Quick Start Up 2 Quick Start Up Camera Operate the camera with the AC adapter or with 4 AA-size alkaline batteries (not provided). 1 If you choose to use AA-size alkaline batteries: a Remove the screw on the back of the camera with a straight-blade screwdriver, then remove the battery door. b Insert 4 batteries. c Place the battery door back on the camera, then secure with the screw. 2 Select a location for the camera that will best capture the baby.
Quick Start Up Monitor Your monitor and camera were linked during manufacture. The monitor operates only when the rechargeable battery pack is installed. After installing the battery pack, you can operate the monitor using the battery pack or with the AC adapter. NOTE: To maximize battery life, charge the battery pack for 3 hours before first use. You can operate the monitor using the AC adapter during charging.
Quick Start Up 6 Plug the AC adapter into a standard electrical outlet. 7 Press the On/Off button on the monitor for more than 2 seconds. A light on the top of the monitor glows when the monitor is turned on. 8 Turn on the camera. 9 Verify that an image appears on the monitor. Mount the Camera on a Wall NOTE: Test monitor reception before mounting the camera on a wall. View the image on the monitor while someone else adjusts the camera position.
Quick Start Up Using the Camera On / Off Button—Press for more than 2 seconds to turn camera On/Off. Using the Monitor On / Off Button— Short Press–Press to turn the display On/Off. Long Press–Press for more than 2 seconds to turn the monitor On/Off. NOTE: When the monitor is turned on, sounds transmitted by the camera are heard even when the display is turned off. OK / Menu Button—Press to access features. Volume Control—Press the + / - buttons to adjust the sound level.
Quick Start Up LCD Indicators Signal— Displays signal strength and link status. Good signal from the camera. Camera and monitor are linked. Diminished signal. Adjust distance between camera and monitor. No signal. Link from the camera is lost (see Troubleshooting). Camera-to-Monitor linking icons Signal strength and battery status as they appear on the LCD Sound Level indicator—Up to 4 orange LEDs indicate the sound level that the monitor is receiving. www.kodak.
Quick Start Up Battery Status indicators— Fully Charged–Battery is fully charged. Battery Charging–Battery symbol changes in sequence. Battery Low–Flashing symbol mean the battery needs charging. AC Power–Device is powered by the AC adapter. NOTE: When the battery is low for more than 10 minutes, the monitor turns off. SD Card Status— SD Card is installed in the monitor. No card is installed. SD Card is full. Replace the card or delete files on the card to create space. SD Card is locked.
Quick Start Up Linking additional cameras to your monitor Your camera and monitor were linked during manufacture. To purchase additional cameras and approved accessories such as a charging dock for your monitor, go to the KODAK Store (www.kodak.com/go/accessories). To link additional cameras: 1 Linking button Use a paper clip to press and hold the linking button on the back of the additional camera for more than 2 seconds (a white LED on the camera blinks twice per second for 10 seconds).
Quick Start Up Special Features Buffered Recording—Insert a memory card into the monitor, then press Record. The monitor records the current scene and up to 20 seconds of previous action. IMPORTANT: You must insert a memory card into the monitor to record video. Night View—In a dark room, the monitor uses infrared LEDs to enable you to see your baby at night. Review/Play—Press the Review button on the monitor–the first frame of the most recently recorded video appears.
Quick Start Up Copying recorded videos to your computer 1 Turn on the monitor. 2 Connect the USB cable to the monitor and your computer. “Found Hardware” appears in your computer tray, and a new drive appears under My Computer. 3 Open the new drive, then copy any saved videos from the SD Card in your monitor to a new location on your computer. You may need to turn on the monitor after disconnecting from your computer.
Quick Start Up Sub-menus Brightness—Press OK. to adjust the brightness of your monitor image, then press Camera Delete—While in Camera Delete, press OK. Press to delete, then press OK. to select a camera NOTE: If you only have one camera, you cannot delete it. Power Saving—You can turn off the LCD to save power. Press to select 30 Seconds, 5 minutes, 30 minutes, or OFF. Press OK to return to the main menu.
Quick Start Up Set the Date and Time IMPORTANT: You must install an SD Card in the monitor to set the date and time. Date and time must be set so that recorded videos are sorted by date and time. 1 At the Main menu, select the SD Card icon, then press OK. 2 Press to select Date/time, then press OK. 3 Select a Date format. 4 Press to change numbers from 0 to 9. Press the date format and time setting. Press to increase or to move between to decrease numbers.
Quick Start Up Tips and Troubleshooting ■ To improve reception, adjust the distance between the camera and the monitor, or move the monitor away from other devices (cordless phones, Wi-Fi devices, etc). You can also extend the antenna on the monitor. ■ To conserve battery power, use the AC adapter. ■ If you installed alkaline batteries in the camera, remove them during long periods of non-use.
Appendix 3 Appendix KODAK Baby Video Monitor / M240 Specifications Monitor 2.4 in (6.1 cm) diagonal LCD, 480 x 234 pixels, 4:3 aspect ratio Power supply M240 System AC Adapter Model No. EFS00500590055OUL, Manufacturer: Eastern Frontier. EIAJ Class 2 DC plug. Input: 100-240V AC 50/60 Hz. 0.2Amp Output: 5.9 V DC, 0.55 Amp, 1.8 m cable Size 2.5 x 6.3 x 1.0 in (6.5 x 16 x 2.5 cm) Weight 1.1 lb (511 g) C10 Camera AC Adapter Model No. EFS00500590055OUL, Manufacturer: Eastern Frontier.
Appendix Temperature Operating: 32 to 104° F (0 to 40° C) Storage: -25 to 160° F (-32 to 71° C) Important safety instructions Limited warranty Kodak warrants KODAK Consumer Electronic Products and Accessories (“Products”), to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase. Retain the original dated sales receipt. Proof of the date of purchase will be required with any request for warranty repair.
Appendix Your rights Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states or jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific rights, and you may have other rights which vary from state to state or by jurisdiction.
Appendix Canadian DOC statement DOC Class B Compliance—This Class B digital apparatus complies with Canadian ICES-003. Observation des normes-Classe B—Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Notice When the monitor is operating, it is possible to view images and other content directly from other sources. Eastman Kodak Company, its subsidiaries and affiliates do not control and are not responsible for any content displayed or viewed. 17 www.kodak.
Appendix Wall mounting Template Select a wall location for the camera, then drill 2 holes in that location using a 13/64 in. (5.2 mm) drill bit. Use this template to determine hole placement. 1.2 in. (30 mm) Top www.kodak.