Front View 1 LCD screen 2 Quick Touch border (Tap/Slide) 3 Quick Touch border (Tap only) 3 To use the touch border, see page 4. 1 2 Back/Right View 1 Audio In 1 4 2 2 Audio Out 3 DC-In (12V) 4 Speakers 3 www.kodak.com/go/digitalframesupport 1 ENGLISH See the extended user guide – for more information about using your frame, visit www.kodak.com/go/digitalframesupport. See the frame package for package contents.
Back/Side View 1 4 5 2 9 3 6 7 8 2 1 Power button 5 Volume button 2 Wall mounting holes 6 Memory card slot - CF, MD 3 Rotating/extending stand 7 USB connector (to camera/USB device) 4 Memory card slot - SD, MMC, MS, xD 8 USB connector (to computer) www.kodak.
1 Getting started Setting up the stand; attaching the power cable Your frame is set up to display pictures in landscape orientation. You can turn the stand to change it to portrait but you must also change the setting (see the extended user guide). Stand (pull out to adjust the frame angle) Your power cable may look different from the one pictured. Use the plug that accommodates your type of power outlet. Turning on your frame Power button- press and hold for 2 seconds, then release. www.kodak.
Getting started Using your frame’s Quick Touch Borders Tap lights next to buttons (No sliding here) Touch tips Tap and slide on the Quick Touch Borders* only. Tap a border to display the icons. Tap (Close) to dismiss them. Tap the light closest to a button to select it. Slide to highlight menus, pictures, videos, options.** Tap OK to select them. Don’t hover, borders can be sensitive.
Getting started Setting your language The language screen appears the first time you turn on your frame. ■ 2 1 1) Slide or tap below arrows to find your language. 2) Then tap OK. To change the language at a later time: (Home) → (Settings) → Language. ■ Tap ■ 1) Slide or tap below arrows to find your language. 2) Then tap OK. Connecting to your wireless network After you set your language, your frame scans for available wireless networks. See Connecting to your wireless network, page 7.
Getting started Inserting a memory card ■ To insert a card, push the card firmly into the slot until it stops. ■ To remove a card from: - top card slot, push in the card to release it. - side card slot, pull out the card Secure Digital MultiMedia Card Memory Stick xD CompactFlash IMPORTANT: Do not insert a micro or mini memory card without an adapter. MicroDrive Connecting a digital camera or other USB device USB cable included with your USB device USB devices: camera, flash drive, card reader, etc.
2 Setting up for wireless operation If you have problems with your wireless setup or connection, see Troubleshooting starting on page 22. Or open EasyShare digital display software on your computer and click Tools → Wireless Troubleshooter. Follow the automated troubleshooting wizard. Connecting to your wireless network To allow your frame to access the contents of your computer wirelessly, connect your frame to your wireless home network.
Setting up for wireless operation Available wireless networks are listed. NOTE: If the scan finds multiple networks, your home network (with the highest % signal strength) is usually listed first and highlighted. Or, to select another network, slide or tap below the arrows to highlight a network, then tap OK. Tap Back to dismiss the screen and connect later. Later—To connect later, tap Home → Settings → Network → Scan for wireless networks. Then follow the screen prompts and continue with step 2 below.
Setting up for wireless operation a character then tap when finished. (Select). The character appears in the text box. Tap Done If you do not have security enabled, go to step 1. NOTE: The screen identifies your security as either WEP or WPA. A WEP security key can be either: 5 or 13 characters (0-9, A-Z, some special characters, case sensitive), 10 or 26 characters (0-9, A-F, not case-sensitive). A WPA key is 8-63 characters, case sensitive.
Setting up for wireless operation Installing the software The CD that was packaged with your frame contains two applications that work well independently, but also work together for the best experience with your frame: Kodak EasyShare digital display software —manage your frame, copy between your frame and computer, and set up your frame for access to Kodak Gallery and Web content (page 11). ■ Kodak EasyShare software —organize, edit, and share your pictures.
Setting up for wireless operation 3 Double-click to open EasyShare digital display software if it doesn’t open automatically. When prompted, take a few minutes to electronically register your frame and software for exclusive tips and offers. To register later, visit www.kodak.com/go/register. Using Kodak EasyShare digital display software Install the digital display software that was packaged with your frame (page 10) on any computer that you want your frame to connect to wirelessly.
Setting up for wireless operation Setting up access to Gallery and Web content On your computer, use Kodak EasyShare digital display software (page 11) to set up access to Web content such as your Kodak Gallery account, RSS (Really Simple Syndication) photo feeds, music, or videos. 1 Make sure your computer is connected to the Internet. 2 Click on your desktop to open EasyShare digital display software. 3 In the Menu bar, select Tools → Device Settings. 4 From the pull-down menu, select your frame.
Setting up for wireless operation Connecting to available computers and devices After installing the software (page 10) and setting up access to Web content (page 12), return to the Network Connection screen on your frame (see page 8). 1 Tap Scan now. The Scanning screen appears as the frame scans your network and then lists available computers and other picture sources that your frame can access wirelessly.
3 Doing more with your frame Viewing the Home screen Start at the Home screen to: ■ access your pictures, videos, and music ■ set up and view Web content ■ customize your viewing through the Settings screens 1 Tap (Home). If the icons are not visible, tap the Quick Touch Border. 2 Tap the light below one of the icons along the bottom of the screen. 3 Tap Close to dismiss the icons.
Doing more with your frame Accessing your pictures and videos 1 Tap (Home), then (Pictures and Videos). All connected sources are displayed. 2 Slide or tap below the arrows to highlight a picture source, then: ■ Tap (Play slide show) to start a slide show of the pictures in the highlighted source. ■ Or, tap OK to view thumbnails, folders, etc. Picture sources: My Frame—the frame’s 512 MB internal memory. Copy your pictures into My Frame from a memory card or other device.
Doing more with your frame Viewing pictures and videos View pictures and videos from any picture source (see page 15). IMPORTANT: For wireless access, make sure you set up your frame to work with your wireless home network (see page 7). View a single picture and thumbnails To view a single, full-screen picture, highlight it in thumbnails view, then tap OK. To view your pictures as thumbnails: ■ Tap (Home) → then tap OK. ■ Or, from a slide show or single view, tap (Pictures and Videos).
Doing more with your frame Play a slide show There are two ways to start a slide show on your frame: ■ Turn on the frame, then insert a card or connect a USB device—a new slide show starts automatically, replacing a currently running slide show or single view picture. Highlight a picture (in thumbnail or single view), or highlight a picture source on the Pictures and Videos screen, then tap (Play slide show). NOTE: A slide show plays continuously until you stop it or turn off the frame.
Doing more with your frame Select one at a time 1 In thumbnails view, slide along the bottom touch border to find a picture, then tap (Select). A check mark appears on the selected picture. 2 Continue selecting pictures. To remove a check mark, tap (Unselect) while the picture is highlighted. Select/Unselect all ■ In thumbnails view (page 16), tap Select All. ■ To remove all check marks, tap Unselect All. Playing music Play music without pictures 1 Tap (Home), then (Music).
Doing more with your frame Play background music Accompany a slide show with your favorite music. 1 With a slide show playing, tap (Viewing Options), then tap Background Music. 2 Use the slider to navigate to the music or song you want to play, then tap Play. 3 Tap (Play slide show) to resume the slide show. Viewing Web content ■ Play slide shows of Web content (Kodak Gallery albums, RSS feeds). See page 12. ■ Receive pictures from your friends and family at the Gallery (see page 20).
Doing more with your frame Automatically receiving My Friends’ Albums Your wireless frame uses Kodak’s Picture Mail feature to automatically notify you ( ) when a friend shares pictures with you at the Kodak Gallery. Play a slide show of the new pictures, right on your frame, even before you see the email on your computer! To see the shared pictures right away: ■ When the notice appears on the frame screen, tap below View now. A slide show of the new pictures plays on your frame.
Doing more with your frame Adding a matte and faceplate Customize your frame with a decorative matte and/or faceplate (packaged with some frames). Additional mattes and faceplates are available for purchase. Frame When you are not using the matte, reapply it to the liner and store in a plastic bag to keep the adhesive backing clean. Matte Faceplate See page 25 to maintain your frame and faceplate. Learning more about your frame www.kodak.
4 Solving frame problems For step-by-step product support, visit www.kodak.com/go/digitalframesupport and select Interactive Troubleshooting & Repairs. Or open EasyShare digital display software on your computer and click Tools → Wireless Troubleshooter. Troubleshooting wireless network connection Problem Possible causes and/or solutions Frame cannot connect to ■ Make sure you have a wireless router and that it is broadcasting the SSID, or enter the SSID manually.
Solving frame problems Troubleshooting frame problems If... Try one or more of the following Frame does not turn on. ■ Make sure the power cable that was included with your frame is connected securely (see page 3). ■ Press and hold the power button for 2 seconds, then release (see page 3). ■ Unplug the power cable, wait 5 seconds, reconnect the cable. Press the power button for 2 seconds, then release.
5 Appendix Important safety instructions CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. Do not expose this product to liquid, moisture, or extreme temperatures. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support.
Appendix Care and maintenance Important: Always disconnect the power before cleaning. Do not use water, cleaning solutions, or other adhesives on the frame or any of its parts. ■ Gently wipe the frame, LCD, matte, or faceplate with a clean, dry, lint-free cloth (included). For fingerprints on the frame, apply light pressure. ■ Do not use cleaning solutions unless designed specifically for LCD screens. Do not allow chemicals, such as suntan lotion, to contact painted surfaces.
Appendix Limitations This warranty does not cover circumstances beyond Kodak's control.
Appendix This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Appendix Hereby, Eastman Kodak Company declares that this Kodak product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This digital picture frame (W820 or W1020) transmits in 10 dBm. In France, the power level is limited to 10dBm in outdoor environments, per regulations. When in France, use the wireless functions of this device indoors only. Canadian DOC statement DOC Class B Compliance—This Class B digital apparatus complies with Canadian ICES-003.
Appendix China RoHS www.kodak.
Appendix Licensing Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), streaming applications (via Internet, intranets and/or other networks), other content distribution systems (pay-audio or audio-on-demand applications and the like) or on physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory c