ASSEMBLY INSTRUCTIONS/ WHAT'S INCLUDED: J: HINGE I i' � ' � x4 K: WOOD DOWELS x28 L: LONG SCREWS x4 M: SHORT SCREWS x16 N: SHELF PEGS x4 0: LBRACKETS SIDES x4 x2 P: SHORT BLACK SCREWS x8 DOORS x2 *NOTE: EXTRAS MAYBE INCLUDED ' LEG: TAPERED LEG: • x4 TI,, YOU WILL NEED: PHILLIPS HEAD SCREWDRIVER x1 6 DO NOT USE AN ELECTRIC SCREWDRIVER ti YOU AND ANOTHER HIELPER
ASSEMBLY INSTRUCTIONS/ • Insert wood dowels into the holes on the bottom of each side panel. Then line up the dowels with the matching holes in the top panel and push down to secure together. D: SIDE K: WOOD DOWELS X12 E: SIDE • Attach L brackets to the top and side panels, using two short black screws per bracket. Pro Tip: Make sure the panels are flush together by first tightening each screw halfway. Then gradually tighten each screw for an even fit.
ASSEMBLY INSTRUCTIONS/ PRO TIP: TO PROTECT THE WOOD, ASSEMBLE ON TOP OF THE CARDBOARD SHEETS INCLUDED IN YOUR PACKAGING . • • Slide the back panels into the groove along the back of the top panel. Inser t wood dowels into the holes on the bottom of the divider. Then line up the dowels with the matching holes in the top panel and push down to secure together.
ASSEMBLY INSTRUCTIONS/ • L: LONG SCREWS X4 Secure the bottom panel using four long screws. D: SIDE • Align each leg with the holes in the bottom panel. Then use the wrench to secure each with one bolt and washer p er hole.
ASSEMBLY INSTRUCTIONS/ PRO TIP: POSISITION THE LEG PLATES SO THAT THE ANGLED PART OF THE PLATE IS FACING INWARD FROM EACH CORNER. THIS WILL ENSURE YOUR WOODEN LEGS ARE ANGLED CORRECT LY.
ASSEMBLY INSTRUCTIONS/ • Align each hinge with the holes in the door panels. Then secure each with two short screws. F: DOOR • Attach door panels to the side panels using two short screws per hinge. Pro Tip: Make sure the doors are level with the top panel by first tightening each screw halfway. Then gradually tighten each screw for an even fit. SOME ADJUSTMENTS ON DOOR HINGES WILL BE NECESSARY.
ASSEMBLY INSTRUCTIONS/ • Insert shelf pegs into the holes in the side panels at the desired height. Then slide the shelf in and lift to rest on the pegs. PRO TIP: TO PROTECT WOOD AND HARD FLOORS, USE INCLUDED FELT PROTECTORS UNDERNEATH THE CREDENZA LEGS.