Installation Instructions

Using Qi wireless charging technology, your Samsung or iPhone or other Qi
compatible devices can be automatically identified and quickly charged when
placed on the charging pad. The 15W Wireless Fast Charger
comes with the following amazing features:
Slim, compact and portable design
Intelligent 15W Max Fast charging
Unique Circle LED indicator light, showing charging status
Internal electromagnetic induction coil of cellphone
Internal electromagnetic induction
coil of wireless charger
Foreign object detection(FOD) built-in
Silicone anti-skid pads
Type-C charging port
Charging Zone
LED Indicator light
Material
5W/7.5W/10W/15W(Max)
Charging Cable
5V/2A,9V/2A,12V/2A
(Pls kindly use QC2.0/QC3.0/PD charger)
3
Compatible with Samsung Galaxy S:22/22
+/22 Ultra/21/21 5G/21+5G,IPhone 13 Mini
/13/13 Pro/13 Pro Max/12/12 pro and most
other QI compatible devices
1. Connect the wireless charger to the power. The circle LED
Indicator light turns blue and red, and it will turn off after 3 seconds
when it is not charging.
3.Do not put the charger close to the fire, into the fire or water.
4.Do not use the charger in the high temperature, high humidity
or corrosion environment.
5.Do not place the charger close to a magnetic card or any other
magnetic resource.
6.Do not put the iron object on the charging pad.
7.Keep the charger away (20cm or farther) from the implanted
medical device (for example,pacemakers,implants).
8.Keep the charger away from water or other liquids.
10.Do not use the charger as a toy for children.
11.Use the charger at a temperature between 0 ~ 50°C.
9.Disconnect the charger from the power before cleaning your charger.
Caution FCC Statement
2. When you put smart device on the charging pad, the circle LED
Indicator light will turn to blue breathing light while working and will
turn to blue light after the device is full charged.
3. When a key or any other metal object is placed on the charging
pad,it will be detected and the circle LED Indicator light will turn to
red flashing light to remind you “foreign object detected”. It is a very
safe wireless charger!
Note: All devices to be charged must meet QI standard
This wireless charger uses electromagnetic induction to charge
your device. Don’t place any metal or magnetic object between
your phone and charger that can cause severe overheating or
damage your charger and devices. It is highly recommended to
remove your phone case before charging.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions (1)this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.