User's Manual

Anti-Lost Device
User Manual
Anti-Lost Alarm
2. Application
3.Specifications
Thank you for choosing this smart Anti-lost alarm product
based BT Version 4.0 technology with the BT connection between
the Anti-lost alarm device, which is tied to your valuable belongings
or kids, and free mobile application installed on your phone, you
can find your belongings or kids and etc. within effective range of
the device.
This product uses CR2032 button battery easy to buy and replace
the battery.
Avoid losing your valuable belongings, kids, pets or etc.
Remind you that your personal belongings in case you forget them.
Remind you once your important document is took away or out of
certain range set by you.
Size: 47*35*10mm
Weight: 8g
Battery type: CR2032 button battery
Battery warranty: ≦6 months
BT: 4.0
Effective meters: ≦12m
Anti-lost alarm effective range (≦ 20m)
Buzzer: ≧80db
App Name: e-Tracker
Compatible operating systems: iOS 7.0 system or above and
Android 4.3 system or above
Other functions: Take photo
1.Button
2.Indicator
3.Speaker/hole for disassembling
Thank you for choosing the smart anti-lost alarm based on BT 4.0.
Please read this manual carefully before use to avoid any damage
caused by impropriety.
1.Product Overview
4.1.Switch On/Off
Switch On: Press the button and hold for 3 secs until you hear the
bell ringing and the indicator flash twice
Switch Off: Press the button and hold for 3 secs until you hear the
bell ringing.
4.2.APP Installation
a. Android System: Please search the “ e-Tracker ” in Google Play
and install on your mobile phone.
b. IOS System: Please search the “ e-Tracker ” in App Store and install
on your mobile phone.
C. Scan the QR code and download
4.3.Connection
Turn on the APP “eTracker”, it will connect with the Anti-lost Alarm
device automatically:
no icon: press the upper right button to research the device
: it is lost connection with the device, please press the
4.Functions and Operations
icon and connect again; : it is connect with the device
successfully
4.4.Deletion
Slide the or yellow icon to the left or right side, it will be deleted
successfully.
4.5.Anti-lost alarm setting
a.Anti-lost alarm: Connect with the smart phone through specified
App software by BT connection; Putting the devices with the
easy-lost & valuable belongings together; when your easy-lost &
valuable belongings out of the distance, the devices will ring and
light flash to alarm.
b.Finding belongings: In the state of connecting, press the button
of the devices twice, your phone will alarm; press the button
on the App, the devices will ring and light flash to find your
belongings.
c.Canceling the Alert: Click the button, the devices stop
ringing and flashing; click the blank space of the APP and the
phone will stop to ring.
4.6.Photograph
Press the “Photograph’’, it will turn to camera mode, press the button
to take photo.
4.7.Location
Locating list: To show where the Anti-lost alarm is;
Lost History: Record the site where your belongings lost before.
4.8.General setting
Map switch: Choose Google or Baidu map
5.1 There is a disassemble place on the bottom of Anti-lost alarm,
directly rear with a fingernail to remove and then replaced with new
battery
5.2 Assemble
Do Not Disturb Mode: Turn on the switch, the APP will not alarm even
if lost connection with the Anti-lost Alarm device
Rename the APP:Users can change the name of the APP freely
a. Put the new button
battery (Battery type:
CR2032) onto the back
housing of the device,
with negative electrode
upward and positive
electrode downward
( The side with a "+" sign
is a positive electrode of
the button battery.
c. Press properly the area
with the keyring hole first,
and then press the opposite
area with a speaker hole
properly to make sure the
product is fixed well.
b. Assemble the
Anti-lost alarm
with the back
housing in the way
the button battery
below the front
housing.
d. Finish the
replacement of
button battery
Anti-lost alarm
User manual
5.Battery replacement
6.Accessories
1 2
3 4
IOS Android（Googleplay） Android（Myapp）
7.FCC Statement
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.