User Manual iPad 10.2”/ 10.5”Keyboard Case Contact us: Email: support@earto.net Website: www.earto.net Note: Please read the manual carefully before use ! Any question, please contact us via the above email address.
English Package Included 1 x iPad 10.2” / 10.5” keyboard case 1 x Micro USB cable ( USB charger is not included ) 1 x User manual Compatible for iPad 10.2 7th Gen 2019 (A2197, A2200, A2198) iPad Air 3rd Gen 10.5 inch 2019 (A2152, A2123, A2153, A2154) iPad Pro 10.5 inch 2017 (A1701 or A1709) Pay attention before use Before first use, charge the keyboard fully. 1. Use the included USB cable for charging. Connect one end to a USB charger, and the other to the keyboard. ( USB charger is not included ) 2.
Keyboard Overview Bluetooth Indicator Caps Indicator Pencil holder Charging indicator :Main screen :Brightness- :Brightness+ :Siri :Screenshot :Search : Virtual Keyboard :Switch Language :Previous track :Play/Pause :Next track :Mute :Volume down :Volume up :Lock screen :Delete 03
+A = Select all +C = Copy +V = Paste Pairing Steps Step 1. Switch ON/OFF to ON, the two indicators will turn on for 3 seconds. Step 2. Press the “fn + delete” keys together to enter pairing mode. The blue Bluetooth indicator will start to rapidly flash. Step 3. On the iPad, select Settings - Bluetooth - On. Step 4. The iPad will display “Bluetooth 3.0 keyboard” as an available device. Step 5. Select “Bluetooth 3.0 keyboard” on the iPad, the indicator will be off after successfully paired. Note: 1.
How to Change the Backlight Color Cyan Color Press the ‘light bulb’ to turn it on, press it once for on, twice for brighter, third for the brightest and fourth to turn it off.
Indicator Light Bluetooth indicator Press “fn+delete” keys to enter pairing mode. Caps lock indicator Blue light is on. Charging indicator Fully Charged - turns green. Stably on in red color. Low battery indicator - Flash in red color to remind you to charge it. Specifications Bluetooth Specification Bluetooth 3.
Installation and Removal 1 . Removing back protective piece: hold iPad on both sides and use thumbs to gently push off the back cover (see photo.) Cover is held in place by two tabs. 2 . Proceed to “peel” cover away from iPad. 3 . Take iPad out. 4 . Take iPad out upwards. Trouble shooting If the keyboard is not working correctly, please check the following: 1. The battery is too low. Fully charge the keyboard (no less than 2 hours) for the first time to extend battery life. 2.
I can’t get my Bluetooth connected: Step 1: Switch ON/OFF to ON. Step 2: Press “fn + delete” ( Note: Paring indicator light will begin blinking) Step 3: Toggle Bluetooth On in the Settings app on your iPad. Step 4: Tap “ Bluetooth 3.0 keyboard ” under “MY DEVICES” in the Settings. For the coming use, you just need to open the keyboard and tablet power, press any key on the keyboard. Then it will automatically connect. ( No need to click“fn + delete”again. Otherwise, it will show not connected.