3.
Remove the both earbuds from the case simultaneously and the earbuds will enter into pairing mode. EarFun Free L Each earbud could be used independently. Option A : Step 1. Unpair the earbud from the bluetooth-enabled device when it's connected. The earbud will lose bluetooth connection to the current device and enter into pairing mode. Step2. Search on the new device and connect. Option B : Step 1. Triple press the L/R earbud when it's connected and the music's off.
5s L/R 1 L/R Note: For Android devices, the volume unsyncs between the device and earbuds. Even turned up to its highest, it still might be insufficient. You may double press the R or L to increase or reduce it respectively.
Either purple Step 1: Unpair EarFun Free from your Bluetooth-enabled device and delete the old connection on your device. Step 2: Pick up the earbuds from the case and press the buttons for 2s at least to power off until they flash in red. Step 3: Press and hold the button on each earbud for at least 8s until they flash in purple (Do press until they flash in purple. If not, they aren't reset successfully.) Step 4: Place them back into the case and remove it again to start reconnecting.
Q: Can I use both earphones separately? A: Yes, each earbud could be used independently. Q: Is there volume control on the earphones? A: Yes. Double pressing the L earbud decreases the volume while double pressing the R could increase it.