User Guide

Q: What should I do if there is no indicator light on the charging case when I open or close it?
A: Please put the charging case on a wireless charging pad or connect it to USB-C charging cable
to charge until all four lights are illuminated.
Q: How do I reset EarFun Free?
A: If the earbud becomes disconnected or has another problem, you can reset and reconnect
correctly to resolve.
Step 1: Unpair EarFun Free from your Bluetooth-enabled device and delete the old connection on
your device.
Step 2: Pick up the earbuds from the case and press the buttons for 2s at least to power off until
they flash in red.
Step 3: Press and hold the button on each earbud simultaneously for at least 8s until they flash in
purple (Do press until they flash in purple. If not, they aren’t reset successfully.)
Step 4: Place them back into the case and remove them again to start reconnecting.
Q: Can I use one of them?
A: Yes, each earbuds can be used independently. The one you take out and paired with the device
will be the independent one, and the other one become independent.
Q: Is there volume controls on EarFun Free?
A: Yes, you can adjust the volume by pressing the button on earbuds, press the left earbud 2 times
for decreasing the volume, press the right earbud 2 times for increasing the volume.
The button can also used for taking calls, turning the earbuds on and off, next/previous song and
voice assistance. You must use whatever device you have paired them to control the volume.
Q: How do I activate voice assistant?
A: By default, double press the right earbud will activate Siri or Google Assistant. You’ll hear a tone
and the microphone on your earbuds will activate so you can say a command.
Note: Please make sure to set up the assistant on your device first, or voice activation on the
earbuds will not work.
Q: Will the earbuds shut off automatically?
A: EarFun Free earbuds will remain on as long as they are connected to a device. If no audio is in
use, they will enter power-saving mode and wake up once audio is played. If the earbuds are not
connected with any devices, they will automatically shut off in 15 minutes.
Q: Why the connection is not stable and cuts out intermittently?
Please mke sure there are no objects between the earphone and your Bluetooth device. also make
sure there is no radio or WIFI interference nearby.
Q: Is the charging case waterproof?
A: No, the earbuds are 100% IPX7 sweat & waterproof, but the charging case is not waterproof.
Q: How to pair the EarFun Free with my device at the first time?
A: Step1: Take out R and L earbuds from the case, and they will automatically enter into pairing
mode(flash blue).
Step2: Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth

Summary of content (3 pages)