080P High Definition 3.5” HDD DVR& Network Multimedia Player M9 User Manual www.eaget.com.
1.Introduction of Product 1.1 Preface The EAGET M9 is a high definition multimedia player with network, download, DVB-T and TV record functions! You can watch movies in the highest resolution(1080P) and in all common formats on your television or home cinema system – including the corresponding multi-channel sound (DTS, Dolby Digital). You can also watch your vacation pictures as a slideshow and listen to your favorite music by this player.
·Adjustable video output resolution (NTSC, PAL, 480p, 576p, 720p, 1080i, 1080p) A/V input ·Input the A/V signal from other device, then browse or recording it by this player. Video Recording ·supports one key recording and scheduled recording, and save as MPEG-2 (.mpg,or .ts)format; ·supports time shifting function.
TTEM Quantity EAGET M9 Player 1 Piece Power Adapter 1 Piece Remote Control 1 Piece AA Battery 2 Pieces AV Cable 1 Piece USB Data Cable(A to Mini B) 1 Piece HDMI Cable 1 Piece (optional) User Manual 1 Piece Note: The actual contents in the package might be different from the packing list in this manual, if any difference, please check with the vendor. 1.4 Cautions This player’s design and manufacture has your safety in mind.
endanger yourself or your data. 1.4.5 Disposing of the Player When you dispose of the player, be sure to dispose it appropriately. Some countries may regulate disposal of electrical device, please consult with your local authority. 1.4.6 Hard Disk Cautions The player uses an internal hard disk for data storage. Physical impact may create bad sector in the hard disk, you can use CHKDSK to fix the problem.
2.2 HDMI Out (1) Follow the picture and plug one connector on your HDMI cable to the player’s HDMI jack; (2) Follow the picture and plug the other connector on your HDMI cable to the TV’s HDMI jack. 2.3 A/V Out (1) Follow the picture and plug in the 3 color connector to the player’s A/V OUT jack; (2) Follow the picture and plug in the 3 color connector to the TV’s A/V IN jack. 2.
In this way you can use this product to record the contents of the DVD or other video playback devices. 2.5 Y/Pb/Pr Component Out (1) Follow the picture and plug in the 3 color connector to the player’s Y/Pb/Pr jack; (2) Follow the picture and plug in the 3 color connector to the TV’s Y/Pb/Pr jack. Audio Connection while using Y/Pb/Pr Video out: First method: use the audio output from the A/V OUT jack; Second method: use the audio output from the S/PDIF Coaxial or Optical fiber jack. 2.
(Optical Fiber) 2.7 Connecting to a LAN To connect to a LAN (Local Area Network) you require a router or switch (not supplied). (1) Connect one of the crystal plugs on the cable to the player’s LAN socket; (2) Connect the other crystal plug on the cable to LAN port on your router, switch, or hub devices. 2.8 Connecting to a WLAN (1) Make sure the player is powered on; (2) Plug the Wireless LAN USB Adapter (i.e. Wi-Fi USB Dongle) to the USB HOST port of the player.
Network cards sold on the market can be used for this player. Please consult with the sales when you wish to make the best use of this product. 2.9 Connecting a USB Device (Include: U-Disk, removable HDD, USB DVD ROM ect.) (1) Make sure the player is powered on; (2) Plug in the USB stick or USB HDD etc. to the USB HOST port of this player. 2.
Helpful tips: 1. Open “My Computer” and a new disk symbol will appear and In this way, you can manage the content on the built-in HDD of the player on your local PC. 2. Please refer to the computer instructions to format the hard disk. (It’s not recommended the user to use other software to partition the hard disk of this player).
3. About the Player 3.1 Remote Control 1.Remote Indicator 2.Stand by 3.Zoom 4.TV SYS 5.Confirm 6.Select 7.Subtitle 8.Audio 9.Teletext 10.Timeshift 11.Pause 12.Play 13.Mute 14.Source 15.Edit 16.Repeat 17.EPG 18.Time REC 19.Stop 20.Eject 21.REC 22.FR/FF 23.Music 24.Setup 25.Previous/Next 26.Home 27.Return 28.OK 29.Navigation Keys 30.Vol+/- 31. Numeric Keys 32.Goto 33.
Remote Control Description: NO. Item 1 2 3 4 5 Remote Indicator Stand by Zoom TV SYS Confirm 6 Select 7 8 Subtitle Audio 9 Teletext DTV 10 Timeshift 11 Pause 12 13 14 Play Mute Source 15 Edit 16 Repeat FUNCTION Remote indicator. Press to enter standby mode or wake up. Zoom in the image. Switch the output mode into video signals. Press to add the selects to the play list.
29 30 31 Press the navigation keys to operate the menus on this interface. Press to adjust the sizes and vertical positions of plug in text Navigation Keys subtitles; press to during picture play to move the viewing position after zooming in and out. Press left/right key to rotate the picture. Vol+/Press to add or decrease the volume. Press to enter numeric input when changing settings. Numeric Keys Select the chapter when playing the file has the chapters.
3.3 Back View 1.USB Device 2.Switch 3.LAN jack 4.HDMI jack 5.Coaxial/Optical fiber 6.AV OUT 7.YpbPr jack 8.AV IN 9.DC-IN 10.FAN 11.ANT IN/OUT Interface Description: No. Interface Operation instruction 1 USB Device Connect to computer by this jack. 2 Power Switch 3 LAN 4 HDMI 5 Coaxial/ Optical Fiber SPDIF Coaxial/Optical fiber output digital audio. (The SPDIF coaxial/optical cables are not including in attachment).
3.4 Side View 1. Extenal SATA Interface 2.USB Host ×2 Interface Description: No. Interface 1 External SATA Interface 2 USB HOST × 2 Operation instruction Connect the external SATA HDD. Connecting external USB device by this jack. 3.5 Install HDD 3.5.1 Loosen the screws and open the bottom cover. 3.5.2. Install the HDD (Put the 3.5” HDD on the bottom cover and tight it by the screws).
3.5.3 Connect the player’s data cable and power cable to the HDD. 3.5.4 Install the bottom cover as following picture: 3.5.5 Lock the screws on the bottom of player.
Then HDD installation is completed, as shown below: 4. Power On/Off 4.1 Power On Connecting the power cable and Video cable and switch on, then press the stand by key on the remote controller or press the power key on the front panel of the player, power on the TV and select the input signal by the connecting way, the player will soon enter into the home menu. 4.
Press the Left/Right keys on the remote controller to select MOVIE from the main menu above the screen; Browsing Movie Instructions of Operations Press the Up/Down keys to select the device to be previewed and press the OK key to access; Press Up/Down keys to select the folder or movie to be browsed and press the Ok key to the full screen plan state. The following buttons can be used to control video playback: Pause Play FF/FR Pause to playback the file. Restart to play the file which was paused. FF: (1.
Helpful tips: 1.In case of messy codes displayed during playing some subtitle files, press Subtitle key to call out the Subtitle menu and modify the corresponding character set codes and it will display normally; 2. In case of no audio output during playing some movies, switch the Audio to other channels and if it still fails, please try to decode by power amplification; (Please refer to 2.6 connecting to a Digital Amplifier; and refer to 9.1 Change the Audio Settings) 3.
preview interface. Mute Volume+/Stop Turn on/off the sound. Add or decrease the volume. Stop playback the file. Helpful tips: In this application, the player will display all supported music files. 5.3 Browsing Photo Press the Left/Right keys on the remote controller to select photo from the main menu above the screen; Browsing Photo Instructions of Operations Press the Left/Right keys on the remote controller to select photo interface.
Helpful tips: 1. It will automatically start the slide mode when the picture is displayed in full screen; 2. You can also preview pictures when listening to your favorite music; 3. All supported picture files will be displayed in this application. 5.4 Browsing All In this mode, all supported files and folders (only support for music, photos, and movies files) will be displayed. 5.5 Browse the files via network There are three ways to locate media files shared on your local network in the Network menu.
My_Shortcuts Instructions of Operations Press the Up/Down keys on the remote controller to select My_Shortcuts from the network menu and press OK key to access. Press the EDIT button and select Add option access. After the add item is selected, you will enter IP setting window. Press OK key to set the Net User ID, Net Password, and Specific File Server IP. click Simple/ Detail to switch between simple and advanced menu.
If there is no Net User ID, Net Password for the shared pc, please input the IP adress in Specific File Server IP directly. Select detail to setting Label, Net User ID, Net Password, Domain, Host Name, and Specific File Server IP. Click Simple/Detail to switch between simple and advanced options. Then you can select and play the shared media files on the destination computer. You can also select modify to modify initial setting. Select delete for deletion and select return to exit. 5.5.
1 Transcode Status: Display the status of Transcode Server on this interface. 2 Net share dialog: Click Net share dialog and select the shared folder on the local PC. Press "Add" to add the shared folder, press the "delete" to delete the selected folder. The shared contents of the folder you can be browsed under the My_Neighbors. Such as you add a folder named test movie on the local computer, you will browse the test movie folder under the My_Neighbors of the player's.
Then you can access to the files which you shared on the computer by My_Neighbors. 3 Setting: On the setting interface, select the Auto Run on system startup option, click Apply to confirm, the software will running automatically when the computer boots up. 4 Event log: On the Event log interface to display PC and Media player communication information.
5 About: On the about interface view the software’s version information. 5.5.3 Browsing through WORKGROUP The system will automatically search the network computer. If the computer is found, the player will display the computer name in the list for users’ choice. WORKGROUP Instructions of Operations Press Up/Down keys on the remote controller to select the workgroup and press OK key to access.
states sometimes. Then it’s recommended that you can preview by My_Shortcuts. 5.6 Browsing from DVD When you connect an external DVD ROM, the system will be finding the device automatically, then you can select DVD item in browser and find the file to play. If you set the R/RW auto-play as on on Setup-System setting menu, then when the system detects the DVD-ROM, it will be playing backs the disc automatically. 5.
2). Select settings on this interface and Select Allow new devices and computer automatically (not recommended) item. The system will found the UPNP device on the network automatically. Select allow to making the device (the HD player) is customized. 3). Select library->add to library.
4).On Add to library interface and Add to add the share files. Then the UPNP server configures on computer is completed. Note: you need to close the windows firewall, or you will not achieve the function of the media file sharing.
Then you can select UPNP in Browser to access. 5.8 Play List With Play List function, you can add your favorite media files into the list to play. 5.8.1 Add Music to the Play List Add Music to the Play List Instructions of Operations Select HDD in browser column for entrance. Then select music interface.
When you selected the files in playlist, then press Return, it will be prompt as “do you want to leave without save to playlist” and select Confirm or Cancel to set it. Helpful tips: 1. To use the Play List, you must format you internal HDD in “setup” mode first. 2. Only add the media files on internal HDD, the files in USB and other external device are not allowed to add. If you need to add the files on external device, you should copy it in internal HDD. 3. Cannot add the folders. 6.
internal HDD. Delete the files Instructions of Operations Press the Up/Down keys to select the files which you want to delete. Press the Edit keys to select delete item. 7. File Copy Menu Select the File Copy item on the main menu to enter into the File Copy menu, it is allows you to copy files between Removable Devices (Card, USB), HDD, and Network ect.
In the source device, select the files which you want to copy. Press select key on the remote controller to select/cancel files. Press the Right key to next step. Step 3: Select the destination folder Select the folder you want to save the copied file in the targeted device. And you can also create a new folder to saved the copied files (select “New directory”, it will pop-up Virtual keyboard and named the folder). Press Up/Down keys to select the folder, press the Right key to execute the next step.
main menu to access. On this menu, you can watch and record the AV input signal from the A/V IN jack on the rear panel of the player.the connect way please refers to 2.4 A/V input connections. After connected, the input signal will be displayed under the AV IN interface of the player,you can access to and view it. 8.1 REC The setting of the REC please refer to the chapter 9.3 Changing REC Settings. 8.1.
This media player has timer record function, you can set a time and stand by the player, on your setted time it will be record automatically.After finished, it will power off and in standby mode. The schedule record menu allows you to edit, delete recording schedules and view all schedule status and history. Select the schedule record icon on the main menu and access. 1) Edit Add a New Schedule Press the left /right key on the remote control to select the Edit tab from the menu bar.
2) Delete Schedule Press the left/right key on the remote control to select the Delete tab from the menu bar. Select the schedule you want to delete and press the Enter button. A confirmation message appears. Select Cancel, Delete the selected schedule, or Delete all schedules. Press the OK to confirm. 3) Status Change the selected schedule status: Press the left/right key on the remote control to select the Status tab from the menu bar. The schedule list is displayed.
Press the left/right key on the remote control to select the History tab from the menu bar. Here you can view a complete history of all recordings that were set. And you can press the OK key to delete the selected history. 9. Setup Menu The Setup menu allows you to personalize and configure the preferences for your player. Select the Setup icon on the main menu or press the Setup key on the remote control to enter into the setup menu.
will be decreased to make you more comfortable. HDMI Output: Choose among RAW/LPCM DUAL CH/LPCM MULTI CH. SPDIF Output: Choose between RAW/LPCM DUAL CH. In raw mode,Dolby Digital,DTS,or MPEG sound can be bypassed to the HDMI TV or Digital amplifier. 9.2 Changing Video Settings Use this menu to configure video settings. Video Settings Instructions of Operations Pan Scan 4:3: Display a wide picture on the entire screen and cuts off the redundant portions. Select when a standard 4:3 TV is connected.
9.3 Change REC settings Use this menu to configure REC settings. REC setting Instructions of Operations Quality Select the recording quality. Choose from HQ, SLP, EP, LP and SP. The higher the quality, the more space required on the hard drive. See HDD Free Space on the left of the screen for details of how long you can record for using each setting. REC device Select the stroage device(HDD or USB). 9.
b. FIX IP (MANUAL) Select to manually input the IP Address, Subnet Mask, Default Gateway, and DNS Server IP Address. In case of any questions about the settings, please go to the network administrator for help. Use the Navigation and Number keys on the remote controller to input the IP address. Press Ok key to confirm. 9.4.2 Wireless Setup 1). Selecting a connection profile This player can store up to three wireless network connections.
Choose among Infrastructure (AP) and Peer to Peer (Ad Hoc). Press Ok key to go to next step, and press Return to cancel. The following detailed description of these three kinds of connection settings. 9.4.2.1 Infrastructure (AP) Infrastructure mode is used to connect computers with wireless network adapters, also known as wireless clients, to an existing wired network with the help from wireless router or access point.
After set up ok, the system will display the set result in Test OK and Show Net info interface. The information of wireless base station is recorded here, such as SSID, safety mode, IP address, subnet mask and preinstall gateway. Press the enter key to complete the setting. If obtained the IP address failed, please return and try it again. 9.4.2.
Step 1: Ad-Hoc Setup After AD HOC way is selected, press ok key to enter Ad-Hoc setting page. Directly press Play key and the system will automatically carry out Ad-Hoc setting based on the default setting. Related settings: a. Wireless SSID (name of wireless) Use the Virtual keyboard to input. b. Wireless Security (select whether it is Open System or whether use WEP password to enter) Use the Virtual keyboard to input. c. Host IP After the setting is finished, press Play key to enter system setting.
a. PBC (Push Button) After PBC mode is selected, press Ok key for confirmation and the system will automatically get the IP. If the setting is successfully finished, the system will display the set result in Test OK and Show Net info interface. If obtained the IP address failed, please return and try it again. b. PIN code After PIN method is selected, press Ok key for confirmation and the system will automatically get the IP. After the setting is successfully finished, return to network setting interface.
Helpful tips: When the wire/wireless/ PPPoE network are connected at the same time, and obtained the different IP address, on the front of the valid network there is a mark as . 9.5 Change the System Settings Use this menu to configure system settings. Menu Language Text Encoding Select to choose the OSD (On-Screen Display) language. Include:English,TraditionalChinese,Espanol,Francais,Deutsch,Italiano, Dutch,Pyccknn, Simplified Chinese. Press the Up/ Down keys to select the desired language.
Control R/RW Auto-Play grade. Default password: 0000 Automatic play of DVD. Press up/down key to select and press the enter key for confirmation. Angle Mark During play back DVD files, you can select the different visual angles to watch DVD. Press the Up/ Down keys to set the switches. HDD Format Select to format the built-in HDD. After formatted the hard disk, the data saved on the hard disk will be lost; so please operate carefully. More detail please see the Chapter 9.5.1.
The formatting procedure will be finished within a few minutes. And then you can use the hard disk properly on the player. Note: HDD format will remove all data stored on the hard disk drive. Please take care and backup your data in advance! 9.6 MISC Use this menu to configure MISC settings. Resume play Slide show timing Transition effect Whether or not to continue to play from the point interrupted last time.
9.6.1 Auto play the media files function. Only support for used in an external USB storage device. 1. Create three new folders as photo, music, video under the root of the external USB device, and create a photo.txt, music.txt and video.txt file in the corresponding file folder, Copy the files which you wish to automatically playback into the corresponding folder. 2. Through setup-MISC-play, select the class you wish to auto play. 3.
11.1.1 Login on Web Management Page Please make sure player is connected to the network, and get the IP address of the player under Setup->Network menu. Tap the IP address (e.g.192.168.0.195) in the address bar of Internet Explore on your PC.Then you can access the Web server on your PC. Note: if the settings -> System -> Login control is set to on, the password to take effect. The default user name is' admin ', default password is '123'.
11.1.2 Account Management At Home page, select “Account Management” into Account Management page. If click “Account Management” is not into this page, please ok Login control is set to ON. Login password can be modified at here. Please setting password according your favorite. Please input password twice and click “Enter” to confirm. 11.1.3 Visit Neighbor Click Visit Neighbor on the home page of Neighbor Web.
All the devices are display here and you can click to visit. 11.1.4 BT Download The BitTorrent client btpd is running in daemon (a process running in the background) mode and you can manipulate the process via the Web server. Click BitTorrent Download on the home page of Neighbor Web, then you will enter the BitTorrent Download page. 11.1.
Click Add new torrent on the BitTorrent Download page. Click Browse to upload a torrent file, and click Yes to confirm. 11.1.6 Managing the downloads The BitTorrent Download page also allows you to start, stop, delete torrents, and set priorities for torrents, as well as view the status of current torrents. Click Start to begin download. Click Stop to stop download. Click Delete to delete the selected torrent. Click Refresh to refresh the current status.
Click Up arrow to increase the priority for the selected torrent. 11.1.7 Settings Click Setting on the BitTorrent Download page to enter the BitTorrent Setting page. In the BitTorrent Setting page, you can configure the following settings: Set the maximum download rate. Set the maximum upload rate. Set the idle hours to start the next download automatically. Set the seeding hours. Set to delete the finished torrent files automatically or not. Set the maximum number of simultaneous download tasks. 11.
With this method, you can access into any partitions on the hard disk of the player, you can manage, copy or store the data in the player on LAN. You can also access the player's Internal HD (samba) by the chapter 11.1.3 Visit Neighbor. 12. Upgrading Firmware Firmware refers to the operating system (OS) on this product. Regularly upgrade the firmware to the updated functions. 12.1 Upgrading firmware in setup menu Please download the firmware programs with updated versions from the official websites.
cautious. Please contact your dealer or choose to visit our website for the latest firmware. Note: View the current software version; please enter into the Setup-> System -> System Upgrade menu. 13. Others 13.1 Specifications List of Supported ports: ² USB 2.0 HOST port x 2 ² USB 2. 0 Slave port ² Composite (CVBS) A/V jack ² Component Y/Pb/Pr jack ² HDMI V1.
Answer: (1) Make sure the unit is in on status. (2) make sure that the unit is connected with the computer (3) Connected the product to the back of computer USB jack. Question 2: When I try to disconnect the USB device, I keep on getting “The device ‘Generic volume’ cannot be stopped right now. Try stopping the device again later.” message, what should I do? Answer: Close any program that might be accessing data on the player, including Windows® Explorer.
(1) Open the picture with Photoshop. (2) Select "File" -> "Save As", select the image format is JPEG, input file name as following picture, then click "Save." (3) when click "Save" it will pop-up dialog box as shown below; select "Baseline ('standard')" or "baseline optimized". (4) Click "OK.
Question 10: Why does my player can not recognize HDD? Answer: First make sure it is installed correctly, and do not delete any partitions on computer. If there is a bad area of you HDD, you need to back up the data first and re-install the driver for the system. Question 11: Why the subtitles my added can not come out? Answer: First make sure the file name of the film and the subtitles are in same (Distinguish Capital /small letters), and saved in the same folder. 13.