User Manual

June 30, 2002
LANGUAGE FOR APPROVAL BY EDSN. DISTANCES BELOW ARE NOMINAL AND MAY BE
ADJUSTED AFTER RECEIVING SAR REPORT.
FCC RF Exposure Compliance Requirements for Occupational Use Only:
This Radio has been tested and complies with the Federal Communications Commission (FCC) RF
exposure limits for Occupational Use/Controlled exposure environment. In addition, it complies with
the following Standards and Guidelines:
◊ FCC 96-326, Guidelines for Evaluating the Environmental Effects of Radio Frequency
Radiation.
◊ FCC OET Bulletin 65 Supplement C, Evaluating Compliance with FCC Guidelines for
Human Exposure to Radio Frequency Electromagnetic Fields.
◊ ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to Human Exposure
to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
◊ ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the Measurement of Potentially
Hazardous Electromagnetic Fields - RF and Microwave.
1. This radio is NOT approved for use by the general population in an uncontrolled environment. This
radio is restricted to occupational use, work related operations only where the radio operator must have
the knowledge to control its RF exposure conditions.
2. When transmitting, insure the radio antenna as 23 centimeters or more away from your head and body.
3. The radio must be used with a maximum operating duty cycle not exceeding 50%, in typical Push-to-
Talk (PTT) configurations. The antenna must be mounted to maintain 23 cms from any person.