User Manual EV300O V1.
Specifications Specifications Screen Resolution FOV（Diagonal） Aspect Ratio Focus Interpupillary distance (IPD) Receiver 3D Function Language Power Supply Power Consumption DVR Head Tracker Dimentions Weight EV300O OLED 1024X768 38° 4:3/16:9 3~-6 adjustable 58-71mm 5.8Ghz 48CH Diversity Receiver Side by Side half 10 Language DC 6.5-25.
Diagram 4 5 6 3 7 2 8 1 9 12 11 13 10 14 1.DC PORT(5.5*2.1mm) 3.USB C port 5.Focus adjustment wheel 7.SD card slot 9.Earphone jack 11.Record/Delete 13.CH/BAND/Search 2.Head tracker port 4.IPD Slider 6.HDMI input 8.AV IN/OUTPUT 10.Volume/ Mode 12.System Menu/Headtracker 14.
Introduction The EV300O is First eachine goggles with OLED Screen, the 1024*768 high resolution screen have vivid color and high contrast ration, pilot can see more details in the racing . With diversity receiver , the receiver choose strongest signal, make the image more stable than single receiver. The new designed optics have focus adjustment feature and 38 degree Field of view, gives pilots more immersive FPV experience.
DO NOT EXPOSE THE LENS DIRECT TO SUNLIGHT, OTHERWISE THE SCREEN WILL BURN IN. Quick Start Guide 1.Install the antenna and faceplate. 2.Use power cables to connect battery to the goggles, goggles can power by 2~6cell lipo battery, hold the power button to turn on. 3.Focus adjustment: move the focus adjustment wheel to focus, close one eye to adjust the focus, you can pop up the OSD menu as the template, when the image is clear, repeat the process with the other eye. 4.
SYSTEM MENU ·Short press right button to pop up or quit system menu. ·Roll right shuttle wheel to navigate, press the wheel into the sub menu. ·In image setting menu, customer have standard, bright, vivid, soft and 3 customized Files to select, customer can adjust Brightness, Contrast, Saturation, Hue and Sharpness to suit different environment.
DISPLAY · In Display setting menu, customer can change the aspect ratio(4:3 or 16:9), default is 4:3. ·In Display menu, customer can set the RSSI icon: icon + percentage, Icon, Percentage, disable, also adjust the vertical position of the RSSI. ·The Luminance of the OLED screen and be adjust in the menu (8 stage, default is 5).Normally do not set the brightness too high unless the image is dim. Due to the OLED's characteristic, excessive brightness may cause a slight brightness drop in local screen.
Brightness Adjustment User can roll the right wheel to quickly adjust the brightness. Firmware Update Upgrade Firmware Goggles 1,Connect goggles to the computer. 2,Hold the left button when turn on the goggles, the usb cable will power the goggles, release the left button, computer will automatically install the driver , computer will show a new removable storage . 3, copy the Firmware File to folder(Not the SD card). goggles will installing the update at the same time.
