Product Manual

InstructIons for
Shelter half Wall acceSSory
Step 1. Completely set up your E-Z UP
®
Instant Shelter
®
in the area that you intend to shade according to the
owners manual instructions.
Step 2. Attach half wall to frame as shown. (2) Attach
quick attachment truss clips around the top truss as shown.
half Wall Set Up
© Copyright 2015 International E-Z UP, Inc. USA. All rights reserved. IN.HW.0425
Auto Slider
®
Pull Pin
Top
Truss
Lower
Truss
Quick
Attachment Strap
Truss Clips
Leg
Diagram of installed Half Wall
Half Wall Care:
Use a mild soap (not detergent) and plenty of water for cleaning.
Let the E-Z UP
®
Instant Shelter
®
top, frame and walls dry completely before closing or storing to avoid mildew.
Important Information:
• Always stake or weigh down your shelter. Do not use in any
potentially windy or rainy weather. Wind and rain can damage the
E-Z UP
®
Instant Shelter
®
product and may also result in injury to you
or others. Therefore, do not rely on shelter for protection in heavy
or prolonged rain storms.
• The E-Z UP
®
Instant Shelter
®
product is designed as a temporary
shelter. Do not leave up for extended periods.
• Use caution when handling the E-Z UP
®
folding frame. Avoid
pinching hands or fingers as frame opens or closes.
• Do not use shelter in a lightning storm.
• Do not leave your E-Z UP
®
Instant Shelter
®
product unattended.
• Do not build fires within shelter enclosure.
Step 3. Wrap quick attachment hook and loop straps around the
legs of the shelter Just above the Auto Slider
®
Pull Pin and mid-leg.
(3a) Press straps into pad firmly.
Note:
• The top of the half wall tucks underneath the valance of the
fabric top.
(3)
(3a)
(2)
INTERNATIONAL E-Z UP, INC.
1900 Second Street, Norco, California 92860 USA
Phone [phone] • Fax [phone]
ezup.com
800-45 SHADE
800-457-4233