NR620M Router Quick Setup Guide 1 Quick Setup Guide V1.
Table of Contents TABLE OF CONTENTS ........................................................................................................................... 2 FCC CAUTION ........................................................................................................................................... 4 CHAPTER 1 NAVI N620RG’S ROUTER MODE QUICK SETUP .......................................... 5 1.1 ROUTER MODE’S QUICK SETUP INSTRUCTION ............................................................
2.3.1 Folder Management Setup................................................................................. 41 2.3.2 User Account Management Setup ................................................................. 43 2.3.3 FTP Server Setup..................................................................................................... 44 2.3.4 Printer Server Setup ............................................................................................. 45 2.3.5 Web Camera Server Setup....
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Chapter 1 Navi N620Rg’s Router Mode Quick Setup 1.1 Router Mode’s Quick Setup Instruction Please open a Microsoft Internet Explorer, and enter http://192.168.1.1 (Default Gateway) into browser’s blank: Then you will see the configuration page below: Product Home Page Please click on Administrator button to login to setup at first time, also can change any settings in future. Only the Administrator has the right to set and change all settings. User Name and Password 5 Quick Setup Guide V1.
Please input in the blanks, the factory default values for User Name and Password are “admin” and “admin” (all in lowercase letters); after inputting, please click on “Login” to enter the homepage as below: 6 Quick Setup Guide V1.
Please select the “Operation Mode”, and then select “Router” and click on “Apply”: Then you will go to the page of “Reboot”. 7 Quick Setup Guide V1.
After 65 seconds, you will go back to the homepage, then please click on “Quick Setup”, which leads you to start the step of “Router mode Quick Setup”. 8 Quick Setup Guide V1.
1.2 The Introduction of Router mode’s Quick Setup The typical homepage of N620Rg consists of two separate frames. The left frame contains all available means for device configuration. Menus are indicated by file icons, and related menus are grouped into categories. Click on Basic Setup at the left screen of the main menu. Then you’ll see the full function selected screen appears and do the setting for each items. Router Basic Setup full action table list: 9 Quick Setup Guide V1.
All of the 5 major items must be set in configuring Router Basic Setup. Please click on “Next” button to start configuring. 1.2.1 WAN Setup The WAN settings can be referred to as the Public setting. All IP information in the WAN settings is public IP addresses which are accessible on the Internet. The N620Rg supports 4 connection types to WAN.
1.2.1.1 WAN Setup–Static IP Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, IP Netmask, IP Gateway and DNS address(es) provided by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four IP octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
1.2.1.2 WAN Setup–Dynamic IP Fill Host Name in if required by your ISP. The default MAC address is set to keep the WAN’s physical interface MAC address on the Router. It is not recommended that you change the default MAC address unless required by your ISP. It’s suggested to use Please click on “Next” button to connect to next step. 1.2.1.3 WAN Setup–PPPoE Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses PPPoE connection. Your ISP will provide you with a username and password.
Input it by your ISP provided. Input it by your ISP provided. Please click on “Next” button to connect to next step. 1.2.1.4 WAN Setup–PPTP Some DSL service providers supply a special DSL modem in Europe or Big Pond Cable in Australia. This kind of modem only supports the PPTP tunnel to access the Internet; Please enter the account’s information of Account and Password which provided by your ISP. 13 Quick Setup Guide V1.
My WAN IP, Server IP and My WAN Subnet Mask are all input as necessary. Please click on “Next” button to connect to next step. 1.2.2 LAN Setup If you are using the N620Rg with multiple PCs on your LAN, you must connect the LAN via the Ethernet ports on the built-in Ethernet switch. You must assign a unique IP address to each device residing on your LAN. The LAN IP address identifies the router as a node on your network; that is, its IP address must be in the same subnet as the PCs on your LAN.
Default Gateway IP Address. Please don’t change the default LAN IP settings at this point until you have completed the rest of the configurations and confirm that your Internet connection is working. Please click on “Next” button to connect to next step. 15 Quick Setup Guide V1.
1.2.3 Wireless Setup N620Rg is based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity, which means the router will allow you to access the data you want, when and where you want it. You can use the default ESSID and Channel unless more than one N620Rg or AP is deployed in the same area. The Wireless Mode indicates the mode of the 802.11g interface. And the TxRate allows you to specify the transmission rate.
1.2.4 Time Server Setup The section provides to change the Time. The Router keeps a record of the current date and time, which it uses to calculate and report various performance data, but to change the router’s date and time does not affect the date and time on your PCs. Select your time zone from the “Time Zone” drop-down list, there is no real time clock inside the router, the system date and time are maintained by external network time server. Please click on “Next” button to connect to next step.
The password may consist of A-Z, a-z, 0-9, underscores, and a single dot (.) For changing password, please fills the password information into above blanks, and then clicks on “Next” button. Notice: Only the password can be changed, the user name for administrator is “admin” and can’t be changed. 1.2.6 Router Basic Setup Finish The Router Basic Setup has been completed successfully when seeing this screen.
1.3 Router mode’s Application Setup of Quick Setup Please login to the Product’s homepage by Administrator, and click on the “Application Setup” from main Menu in the left side, the full function selecting screen will appear. Notice: The Router Basic Setup should be done before setting the Application Setup. Application Setup full function table list: 19 Quick Setup Guide V1.
Except the “Folder management Setup”, “User Account Management Setup” the other 7 major items can be optionally set in configuring Router Application Setup under your demand. Please click on “Next” button to start configuring. 1.3.1 Folder Management Setup You can do the HDD partition into each folder and manage the space arrangement for the folders by enabling this function, which you can save and apply all the user’s files in each folder, and you can click on “Disk Explorer” to manage the folders.
You can select the disk type for each partition Warning: The HDD will be formatted if doing above folder setting. Notice: Before setup the Folder Management, please install the IDE into the Product. Notice: After install HDD, if the “Device Free Space” shows 0MB at beginning, please make sure that your HDD has been installed and connected firmly. Please click on “Next” after confirming. 21 Quick Setup Guide V1.
1.3.2 User Account Management Setup Personal users can use each individual application by setting up these rights as Web camera Server, FTP Server, Download Schedule and Samba Server. This section is to set the user’s right. Set each user’s right and space arrangement, then click on “Add” button for saving user’s setting, and click on “Next” button after finishing. All the users right will be shown in User Account List. 22 Quick Setup Guide V1.
1.3.3 Firewall Setup The Firewall rules of N620Rg are an advance feature used to deny or allow traffic from passing through the router. The Firewall Protection level security has Low level, Medium level and High level, please select it under your demand. And click on “Next” button to next step. 23 Quick Setup Guide V1.
1.3.4 QoS Configuration Setup QoS management helps to set and evaluate QoS policies and goals. It is the particular concern for the continuous transmission of high-bandwidth video and multimedia information. Transmitting this kind of content dependably is difficult in public networks using ordinary best effort protocols. Input the figures under your demand to decide the priority order you want. Make sure your connecting bandwidth with ISP and set the Priority percentage.
1.3.5 FTP Server Setup N620Rg can be the FTP Server provides users to transmit files into their own FTP folder, also for the guest can download the files from the FTP anonymous folder. Allow unknown guest to login for Read Only. Set the FTP Server and related setting. Enable the function as your demand, and click on “Next” button to continue. 25 Quick Setup Guide V1.
1.3.6 Printer Server Setup N620Rg, an Internet access solution for your LAN, which provides you the shared web surfing and countless value-added features; by doing this printer server setup, any users in the same subnet of N620Rg or from WAN side can print their document via the network printer. The name of printer model will be shown if connected. Enable the printer and the Printer Model will be shown when plug in. Please click on “Next” button to connect to next setup.
1.3.7 Web Camera Server Setup This field indicates the mode of web camera you use. By connecting webcam to the router, it allows user to monitor their home or office from remote locations. Plug in the Webcam, and you will be able to click on “Enable” to start the function of webcam, and you can also choose the image format. After enabling on your demand, please click on “Next” button to continue to next step.
1.3.8 Download Server Setup You can arrange the download schedule which setup to download information from assigned website on time under your setting. It’s very useful for backup the files or data from the same website. Enable the Download Server, and the detail setting information is described in User Manual. Click on “Next” button to next step. Notice: For each user to use Download Server, please select the item of Download Server in step “1.3.2 User Account Management Setup” at first.
1.3.9 Samba Server Setup Samba Server provides file and printer services for clients using some variants of SMB (Server Message Block) protocol. A printer shared by the Samba Server shows up in the list of shares offered in the Network Neighborhood. If the printer is registered on the client machine and the client has the correct printer driver installed, the client can send easily print jobs to a printer attached to a Samba Server.
1.3.10 Application Setup Finish All the Quick Setup is finished when this screen appeared. Click on “Finish” button and then back to the Product’s homepage. 30 Quick Setup Guide V1.
Chapter 2 Navi N620Rg’s AP Mode Quick Setup 2.1 AP Mode’s Quick Setup Instruction Please open a Microsoft Internet Explorer, and enter http://192.168.1.254 (Default Gateway) into browser’s blank: Then you will see the configuration page below: Product Home Page Please click on Administrator button to login to setup at first time, also can change any settings in future. Only the Administrator has the right to set and change all settings. User Name and Password 31 Quick Setup Guide V1.
Please input in the blanks, the factory default values for User Name and Password are “admin” and “admin” (all in lowercase letters); after inputting, please click on “Login” to enter the homepage as below: 32 Quick Setup Guide V1.
Quick Setup Guide V1.
2.2 The Introduction of AP mode’s Quick Setup The typical homepage of N620Rg consists of two separate frames. The left frame contains all available means for device configuration. Menus are indicated by file icons, and related menus are grouped into categories. Click on Basic Setup at the left screen of the main menu. Then you’ll see the full function selected screen appears and do the setting for each items. Router Basic Setup full action table list: 34 Quick Setup Guide V1.
All of the 4 major items must be set in configuring Router Basic Setup. Please click on “Next” button to start configuring. 2.2.1 LAN Setup If you are using the R620g with multiple PCs on your LAN, you must connect the LAN via the Ethernet ports on the built-in Ethernet switch. You must assign a unique IP address to each device residing on your LAN. The LAN IP address identifies the router as a node on your network; that is, its IP address must be in the same subnet as the PCs on your LAN.
Default Gateway IP Address. Please don’t change the default LAN IP settings at this point until you have completed the rest of the configurations and confirm that your Internet connection is working. Please click on “Next” button to connect to next step. 36 Quick Setup Guide V1.
2.2.2 Wireless Setup N620Rg is based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity, which means the router will allow you to access the data you want, when and where you want it. You can use the default ESSID and Channel unless more than one N620Rg or AP is deployed in the same area. The Wireless Mode indicates the mode of the 802.11g interface. And the TxRate allows you to specify the transmission rate.
2.2.3 Time Server Setup The section provides to change the Time. The Router keeps a record of the current date and time, which it uses to calculate and report various performance data, but to change the router’s date and time does not affect the date and time on your PCs. Select your time from the “Set the Time” drop-down list, there is no real time clock inside the router, the system date and time are maintained by external network time server. Please click on “Next” button to connect to next step. 2.
For changing password, please fills the password information into above blanks, and then clicks on “Next” button. Notice: Only the password can be changed, the user name for administrator is “admin” and can’t be changed. 2.2.5 AP Basic Setup Finish The AP Basic Setup has been completed successfully when seeing this screen. To apply your new settings, please click on “Finish” button to reboot system automatically and goes to the Product’s Homepage. 39 Quick Setup Guide V1.
2.3 AP mode’s Application Setup of Quick Setup Please login to the Product’s homepage by Administrator, and click on the “Application Setup” from main Menu in the left side, the full function selecting screen will appear. Notice: The Router Basic Setup should be done before setting the Application Setup. Application Setup full function table list: 40 Quick Setup Guide V1.
Except the “Folder management Setup”, “User Account Management Setup”; the other 5 major items can be optionally set in configuring Router Application Setup under your demand. Please click on “Next” button to start configuring. 2.3.1 Folder Management Setup You can do the HDD partition into each folder and manage the space arrangement for the folders by enabling this function, which you can save and apply all the user’s files in each folder, and you can click on “Disk Explorer” to manage the folders.
You can select the disk type for each partition Warning: The HDD will be formatted if doing above folder setting. Notice: Before setup the Folder Management, please install the IDE into the Product. Notice: After install HDD, if the “Device Free Space” shows 0MB at beginning, please make sure that your HDD has been installed and connected firmly. Please click on “Next” after confirming. 42 Quick Setup Guide V1.
2.3.2 User Account Management Setup Personal users can use each individual application by setting up these rights as Web camera Server, FTP Server, Download Schedule and Samba Server. This section is to set the user’s right. Set each user’s right and space arrangement, then click on “Add” button for saving user’s setting, and click on “Next” button after finishing. All the users right will be shown in User Account List. 43 Quick Setup Guide V1.
2.3.3 FTP Server Setup N620Rg can be the FTP Server provides users to transmit files into their own FTP folder, also for the guest can download the files from the FTP anonymous folder. Allow unknown guest to login for Read Only. Set the FTP Server and related setting. Enable the function as your demand, and click on “Next” button to continue. 44 Quick Setup Guide V1.
2.3.4 Printer Server Setup N620Rg, an Internet access solution for your LAN, which provides you the shared web surfing and countless value-added features; by doing this printer server setup, any users in the same subnet of N620Rg or from WAN side can print their document via the network printer. The name of printer model will be shown if connected. Enable the printer and the Printer Model will be shown when plug in. Please click on “Next” button to connect to next setup.
2.3.5 Web Camera Server Setup This field indicates the mode of web camera you use. By connecting webcam to the router, it allows user to monitor their home or office from remote locations. Plug in the Webcam, and you will be able to click on “Enable” to start the function of webcam, and you can also choose the image format. After enabling on your demand, please click on “Next” button to continue to next step.
2.3.6 Download Server Setup You can arrange the download schedule which setup to download information from assigned website on time under your setting. It’s very useful for backup the files or data from the same website. Enable the Download Server, and the detail setting information is described in User Manual. Click on “Next” button to next step. Notice: For each user to use Download Server, please select the item of Download Server in step “2.3.1 User Account Management Setup” at first.
2.3.7 Samba Server Setup Samba Server provides file and printer services for clients using some variants of SMB (Server Message Block) protocol. A printer shared by the Samba Server shows up in the list of shares offered in the Network Neighborhood. If the printer is registered on the client machine and the client has the correct printer driver installed, the client can send easily print jobs to a printer attached to a Samba Server.
2.3.8 Application Setup Finish All the Quick Setup is finished when this screen appeared. Click on “Finish” button and then back to the Product’s homepage. 49 Quick Setup Guide V1.
