RADIO FREQUENCY ENERGY SAFETY INFORMATION Your radio generates RF electromagnetic energy suing transmit mode, This radio is designed for and classified as "Occupational Use Only’, meaning it must be used only during the course of employment by individuals aware of tha hazards, nd the ways to minimize such hazards. This radio is NOT intended for use by the “General Population” in an uncontrolled environment. This radio has been tested and complies with the FOC RF exposure limits for “Occupational Use Only".
Connecting Microphone 1. Insert the microphone plug into jack on the front pane! of the transceiver. «+ Be sure the tab on the microphone plug is facing the left hand side (Figure 1-2) 2. Mount the microphone on the microphone hanger where it will be within says reach of the user. 3. To remove the microphone plug, press the tab on the connector while pulling the plug out of the transceiver Jack.
. Appearance of EM Series Mobile Radio Hand MIC Enter Switch TX /RX Status LED Channel UPTOWN Switch Heat Sir DG Power Cable {Fermium Die casting) k Figure 4-1) Appearance EM Caries Enter Switch TX/RX Status LED Channel UPTOWN Switch Power ON / OFF Vol Figure 5-1) EM Front Pane! mule Switch Press and hold the knob over 2 seconds to tum the mobile radio on and off. Rotate to adjust the volume level from 1 to 16. Tum it clockwise to increase the volume and counterclockwise to decrease the volume.