FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device mists accept any interference received; including interference that may cause undesired operation } J. LA Information to the User This equipment has been tested and found to comply with the limits for a class B digital device pursuant to part 15 of FCC Rules.
Locations of controls Features Handset Base unit Initial preparation Before installation Battery installation Installation of base unit and handset Charge your handset Convenient functions for you Memory function / Channel scan / Flash function Redial/Pause function / Auto answer & Auto stand-by Any key answer / Key lock / Intercom Speaker volume control (Handset and Base unit) Out of range Alarm Low battery Alarm Setting the functions Tone / Pulse Ringer Tones Clock Alarm Clock Alarm Function Key lock Spea
Feline ala to Make sure that your package includes the following items : 1. Cordless handset (1) 2. Base unit “) 3. AC Adapter f or Base Unit {1} 4, Telling cord 1) 5. User Manual {1} 6. Battery {1) 7. Belt clip (1) 8. Headset 1) . Remove the battery compartment cover by pushing it downwards. Place battery in the battery compartment. 1 2. 3. Connect the plug of the battery. 4. Place the battery compartment cover, 1.
Function Explanation 41. MEMORY FUNCTION You can store and recall up to 10 frequently called telephone numbers digits each). 2. CHANNEL SCAN You can change the existing channel by pressing Channel button only one time to the clearest channel. 3. FLASH FUNCTION Press this button to finish a call while the phone line is in use and get a new dial tone without pressing the TALK button.
Function Explanation TONE / PULSE TONE MODE ( Default ) # Slide the Tone/Pulse switch to the Tone. PULSE MODE # Slide the Tone/Pulse switch to the Pulse. RINGER TONES Handset There are 4 different kinds of ringer tones. # Press “FUN” button and “5. You will see “bell 1” on the display ¥ Press 1 to 410 select the ringer tone you like. ¥ Press 5 for low bell volume. # Press “FUN” bunion for storage. # You hear a success beep. ¥ “Bell 4" is mute.
ALARM FUNCTION # Press “FUN button and “3”. If the Memory Icon disappears on the display with beep, Alarm function is off now. KEY LOCK To Lock the key # Press “FUN” button and “4” To Unlock key + Press “FUN” button and “4”, VOLUME: CONTROL Handset To Turn the volume Up. # In TALK mode, press *FUNC® button and *#a* TO Tum the volume Down. + In TALK mode; press “FUN” button and *v # Light Explanation Red steady The handset is charged.
foringitheltdlcphonie Numb Step 1 Step 2 Step 3 Press the "FUN button of Press the phone number Press the "FUN" button, handset in standby mode. within 16 digits and you will see LOC( _) 3 In the display. Press the "FUN" button 4 + again. Then memory icon Press memory will appear on the display. Place. You will hear a success beep. ® FUN @ FUN +e FUN ® FUN @® FUN Vy 1234567 4 Phone number “9” b “RE/PAUSE” } Phone Example : If you want to store the telephone number 123-4567 in memory place 3.
Step | pot ore dialing the Step | pirating the phone Step | after completing 1 phone number 2 number 3 the conversation if the handset is on the If you stored the phone When your conversation is cradle. Pick the handset up Press the TALK button and You will hear a dial tone. Press the phone number. Or I the handset is on the base, press TALK button, and use speaker phone. The indicator light of the base unit is green during a call. number in memory place, use memory dialing. After connection, you can tak.
PROBLEM CHECK POINT The portable unit does not work. Disconnect the AC adapter from the base unit and reconnect it. Check the telephone line connection. The handset battery voltage is low. Charge the battery fully. Be sure the “TONE/PULSE” switch is correct. You are too far from the base unit. Check if the voltage of the AC adapter is incorrectly set. Sound flutters or The antenna is not fully extended. fades | You are too far from the base unit. Do not place the unit near electric goods such as TV.