0.
Table of Contents Introduction ................................................................................................... 2 Important Notice .......................................................................................... 2 Before Use...................................................................................................... 3 Product Features ......................................................................................... 3 Optional Devices ............................
Introduction Thank you for your Purchase! Please read through this instruction manual thoroughly and carefully, in order to properly operate this equipment. Please keep this instruction manual in a safe place for further reference after reading. Important Notice • To prevent the risk of traffic accidents and violation of traffic laws and regulations, this equipment should not be installed within the driver's line of sight. • It is illegal for passengers to view the screen in some countries or states.
Before Use Please make sure that the items listed below are in the package. If there is something missing, please contact the dealer where the product was bought. Please read and understand the operation of this product before using, and please follow this user’s manual instruction. Product Features - Adopt 10.2” TFT-LCD monitor with monitor angle memory. - Support three kinds of aspect ratios [FULL, WIDE (16:9), NORMAL (4:3)]. - Allow CD-ROM of DVD, VCD, CD, CD-R, CD-RW and MP3 formats.
Optional Devices Remote Control (With Battery) IR Earphones (With 2 AAA Battery) Note: Available in some vehicles. DVD Player & 10.
Basic Functions RSE Panel Button Functions 1. TFT & DVD disc tray release button: Press once to open the TFT monitor (the monitor will automatically drop down), and press twice to open the disc tray (pickup and place the disc in the tray). 2. IR emitter and receiver: Use the IR emitter to transmit the sound to the IR earphones and receive the signal from the remote control. 3. SRC buttons (When press SRC button, media can be selected as following.) (1) DVD (2) AV1 video signal from DVD of main head unit.
Basic Functions 10. Menu Button (Press MENU to enter OSD setting.) 11. Next chapter button: (Press it: For OSD setting, press to move selection to the right. For USB mode, press to skip to next section, song, video or photo.) 12. Play / Pause button (Press it: For OSD setting, press to confirm, enter or choose the selection. For USB mode, press the button to play or pause.) 13. Previous button (Press it: For OSD setting, press to move selection to the left.
Basic Functions Remote Control Functions 1. DISP button (Use only for roof monitor with DVD.) 2. MODE button (Press it to choose a source of multimedia such as DVD, AV1, AV2, MIRACAST / DLNA or USB.) 3. SOURCE button (Press it to choose a source of multimedia such as DVD, AV1, AV2, MIRACAST / DLNA or USB respectively.) 4. DVD Menu button (Press it to get into the DVD menu page. Use for roof monitor with DVD only.) 5.
Basic Functions 10. MUTE button (Press to mute audio and press again to unmute.) 11. RETURN button (Press to return the file or folder.) 12. Orientation button: Press to move up, down, left, right or OK (in the center) on the screen. 13. MENU button (Press it to enter OSD setting.) 14. STATUS button (Press it to enter DISC playback setting. It is used only for roof monitor with DVD.) 15. AUDIO button (Press it to change the language of DVD. It is used only for roof monitor with DVD.) 16.
Basic Functions How to Operate IR Earphones IR Earphones Functions 1. POWER: - Switch to OFF to turn the earphones off. - Switch to A to output one-sided sound only. - Switch to B to output both sides sound. 2. VOLUME: - Adjust the knob for volume control. 3. IR sound receiver. Caution • Do not cover this part with hands or other objects. Otherwise, it will affect the sound quality. 4. Power LED indicator. - Indicate the status of the earphones. 5. Battery cover: Needs 2 AAA batteries.
General Operations DVD/VCD/MP3/CD Caution • This should be operated under DVD/VCD/MP3/CD mode. • Some functions settings are operative in particular circumstance depends on the disc standards. - Press MENU to open OSD setting. - Select DVD/VCD/MP3/CD. - There are items can be changed while playing the disc.
General Operations By selecting AUDIO, sound tracks can be changed. - Tracks can be selected by entering the numbers, shown as below. - Select ZOOM to enlarge the screen while playing the disc.
General Operations - Select REPEAT mode A to B mode to make repeating of the tracks. - Select STATUS, setting interface will be shown.
General Operations Status Settings To run this setting, it must be operated under disc mode. Press STATUS on the remote control to enter setting sections, system setup, language setup, or video setup. 1. System setup Select SYSTEM SETUP and press OK. After entering the mode, there are seven options on the screen, TV system, screen saver, video, TV type, password, rating and default. You can choose the sections you would like to modify.
General Operations 2. Language Setup Move downward and select LANGUAGE SETUP on the screen. In language setup, there are four options, OSD language, audio language, subtitle language and menu language.
General Operations 3. Video Setup Move downward and select VIDEO SETUP on the screen. In video setup, you can adjust brightness, contrast, hue, saturation and sharpness.
General Operations MONITOR - Press MENU to open OSD setting menu. - Select MONITOR . 1. Screen Mode - Press the SCREEN MODE to display the screen modes: full, wide and normal. - Choose EXIT to Exit. 2. Picture Mode - Press PICTURE MODE to display picture modes; brightness, contrast, color, tint and default. - Choose EXIT to Exit.
General Operations FM TRANSMITTER - Press MENU to open OSD setting menu. - Select FM TRANSMITTER option. - Select "FREQUENCY" to set the channel that you would like to interact with the main head unit by using navigation arrows on the panel or on the remote control. - Press “OK” or “ play/pause” on the panel to confirm. - Select “ON” of Transmitter option to turn this function on. - Select “OK” on the remote control or use “ - Choose EXIT to exit. play/pause” on RSE panel.
General Operations IR TRANSMITTER - Press MENU to open OSD setting menu. - Select IR TRANSMITTER. - Select "ON" of Transmitter option to transmit the sound to the IR earphones. - Select “OK” on the remote control or press “play/pause” on RSE panel. - Choose EXIT to exit.
General Operations LED BUTTON - Press MENU to open OSD setting menu. - Select “BUTTON LED” - Select setting AUTO: LED will be automatically on. It will be automatically off within 10 seconds ON: LED will be always on. OFF: LED will be always off. - Select “OK” on the remote control or use “play/pause” on RSE panel. - Choose EXIT to exit. Note • Default setting of LED is ON.
Disc Playback DVD/VCD Video Disc Playback Turn the monitor on (ACC ON) and press the SRC or MODE button on the panel to go to DVD/VCD mode, or users press SOURCE or MODE button on the remote control. Basic Operations of DVD/VCD Video Discs 1. Press DVD MENU on the remote control to select the required menu options. If the DVD/VCD has a menu, the menu will be displayed. 2. Press MENU → DVD/VCD/MP3/CD → TRACK to select the chapters by entering the numbers directly. 3.
Disc Playback 6. To stop playing, press ■ on the remote control. • If you press ■ to stop DVD/VCD playback, the stop scene on the screen will be memorized. ►■ will be shown on upper left screen. When you play the disc next time, you may play from the scene that you stopped last time. • To retrieve playback, press ►║. • To clear the memory, press ■ again. ■ will be shown on upper left screen. • To play from the beginning, press ►║. Note • The ways for the menu display differ from disc to disc.
Disc Playback CD/MP3 Disc Playback Turn the monitor on (ACC ON) and press the MODE or SRC button on the panel to go to CD/ MP3 mode, or users press MODE or SOURCE button on the remote control. Basic Operations of CD/MP3 Video Discs 1. Press MENU → DVD/VCD/MP3/CD → TRACK to select the tracks by entering the numbers directly. 2. Pause the CD/MP3 Video Disc Playback The pause function enables you to pause while the disc is playing. • When the CD/MP3 disc is playing, press ►║ on the panel or remote control.
Disc Playback 4. To enter or return the other track, press ►►│ or │◄◄ on the remote control and press > or < on the panel. • Press ►►│ to skip to the starting place of next track. Then, press │◄◄ to turn to the starting place of current track. Press again to skip to the previous track. 5. To stop playing, press ■ on remote control. • If you press ■ to stop CD/MP3 playback, the stop playback will be memorized. ►■ will be shown on upper left screen.
A/V Source 1. Enter A/V mode (AV1 & AV2) by SRC button on the panel - Press SRC button until AV1 or AV2 shows on the screen. 2. Enter A/V mode (AV1 & AV2) by SOURCE button on the remote control - Press SOURCE button until AV1 or AV2 shows on the screen. 3. Enter A/V mode (AV1 & AV2) by MODE button on the panel or on the remote control - Press “MODE” - Select AV1 or AV2 Note • AV1: The connection of audio and video from main unit via connector.
DLNA DLNA (Digital Living Network Alliance) Function Prior to using DLNA function on the 10.2" Roof-Mounted Monitor, please install APP(Airfun) to your mobile phone first. Attention : For APP installation, please refer to user's manual of mobile phone. 1. Enter DLNA by SRC button on the panel. 1.1 Press “SRC” until DLNA/ Miracast show on the monitor. 2. Enter DLNA by MODE button on the remote control. 2.1 Press Mode on the remote control. 2.2 Select DLNA/Miracast. 3.
DLNA 5. Open Airfun on mobile as below photo. 6. Select the icon as below photo. 7. Picture playback in DLNA 7.1 Choose Photo/Music/Playback on mobile.
DLNA 7.2 Select photo display on the monitor screen. mode and select the photo you want to show Note • You can select more than 1 photo(s) to show on the roof monitor. 7.3 Press 7.4 Press to play the photo on the screen as the slide show. on mobile for the next photo immediately. 7.5 Press 7.6 Press on mobile to pause photo slide show. on mobile to back to the former layer. Note • When slideshow runs and reaches the last photo, it will be back to the former layer.
DLNA 8. Audio Playback for DLNA Mode 8.1 Select Photo/Music playback option on the mobile phone. 8.2 Select Audio option and select the song you want. Note • You can select more than 1 music file(s) to play.
DLNA 8.3 Press on Screen to play the song. 8.4 Press on mobile for next song. 8.5 Press on mobile for previous song. 8.6 Press on mobile to pause the song. 8.8 Press on mobile to back to music former layer. 9. Video Playback in DLNA mode 9.1 Select Video playback option on the mobile phone and select video you want to show on the roof monitor screen.
DLNA 9.2 Press to auto play on the roof monitor screen. (slide show) Note • You can select more than 1 video file(s) to play. 9.3 Press on Screen to play video. 9.4 Press on mobile for next video. 9.5 Press on mobile for previous video. 9.6 Press on mobile to pause video. 9.7 Press on mobile to back to video former layer.
DLNA Note - The current demonstration is using an iOS phone, please note that the iOS phones and Android phones are different in operation interfaces. Moreover, the name of the device will not be the same, according to the model of the roof monitor. - The connection quality depends on Wifi signal stability. - Only mobile phones with Android version 4.
Miracast Miracast Function 1. Enter Miracast by “SRC” button on the panel. 1.1 Press “SRC” button until DLNA/ Miracast show on the screen. 2. Enter Miracast by “MODE” button on the remote control 2.1 Press the button to select the channel until DLNA/ Miracast show on the screen. 3. Enter Miracast by SOURCE button on the remote control 3.1 Press the button to select the channel until DLNA/ Miracast show on the screen. 4. Go to Settings on phone. 4.1 Select Display.
Miracast 4.2 Select Screen mirroring. 4.3 Open “Screen mirroring” on mobile to connect roof monitor “Toyota RSE XXX”. 4.4 Select Screen mirroring function to turn on Screen mirroring function. This is to connect with roof monitor, TOYOTA RSE XXX.
Miracast (The current demonstration is using an Sony Xperia ZL. The phones are different in operation interfaces. Please read and understand it from your mobile manual.) Note • The device name "Toyota RSE XXX" will show under Toyota Logo. 4.5. When connecting to Miracast successfully, the screen of the mobile will display on screen on roof monitor.
USB USB Input playback 1. Enter USB by “SRC” button on the panel. 1.1 Press “SRC” button until USB shows on the screen. 2. Enter USB by “MODE” button on the remote control. 2.1 Press MODE button on the screen. 2.2 Select USB. 3. Enter USB by SOURCE button on the remote control. 3.1 Press the button to select the channel until USB shows on the screen. 4.
USB Note 1. You can play the next file by pressing press on the remote control twice or on the panel once. 2. You can play the previous file by pressing or press on the panel once. on the remote control twice Note • If the USB is encrypted, it cannot be read on RSE. • iPod is not supportive.
Specifications 1. Applicable voltage: D/C10.5V~16 V 2. Storage temperature:-40℃ ~85℃ 3. Operating temperature: -20℃ ~ 70℃ 4. Main unit weight : 2040g.±50g.(not include accessories) 5. External dimensions: 340.5X 254.5X86.1mm 6. Video system: NTSC / PAL / AUTO 7. Audio Signal input (max) Analog input 1.5 V p.p (Volume 30). 8. Audio Signal output (max) Analog output 1.5 V p.p (Volume 30). 9.
Specifications Supportable Mobile Phones and Setting Brand Model Name How to Access Miracast Function Asus Padfone Infinity 8 Setting→Display→Wi-Fi Mirror Share Coolpad YL-9960 Setting→Display→Wi-Fi Mirror Share HTC New One, Butterfly Settings→Media output Xperia AX, Xperia TL, Settings→Display→Screen Mirroring Sony Electronics Xperia ZL, Xperia TX, Xperia T, Xperia V, Xperia Z Inc. Samsung Galaxy S3, Galaxy Note 2, Settings→More→AllShare Cast Galaxy Tab 10.
Glossary • MP3 MP3 is an abbreviation for “MPEG AUDIO Layer 3” and established by ISO (International Standard Organization) MPEG working group. It is a standard format for storing compressed music. The audio data can be compressed to about one tenth of the original size. • Title A DVD video disc has a higher data capacity and several movies can be recorded on single DVD disc. For example, if a disc contains three movies, they are marked as Title 1, Title 2, and Title 3.
Glossary • DVD Region Code The current protection measure for DVD films (region code restrictions) is proposed by the 8 major film studios in U.S. The main goal is to protect the rights of the dealers and agents and prevent the grey products from being imported. The DVD region codes are classified into six different regions as below.
Basic Trouble Shooting Problem and Resolution Situation Cause Countermeasure The cables do not connect Check the connection of the cables to each other firmly. Please contact your dealer for replacement. Malfunction or noise occur Turn off the machine then turn it on. If problem still occurs please contact dealers to In-stall new batteries. Unable to operate The battery has too little or Install new batteries. the remote control no power. Unable to turn device on The fuse blew.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
There will be some discrepancy in the contents of this user's manual due to the technical evolution and the software improvement. Please follow the actual function display. This manual is only for users' operating reference.
