Sleep Aid Device NAPCAPSULE V1 Manual
• Model Name : NAPCAPSULE V1 • Basic description 1. Place a main unit behind the pillow. 2. Install the dome body as shown in the picture.
. Connect the power terminal to the back of the product. 4. Install an App[NapSule] on your mobile device. 5. Press the On/Off button and do Bluetooth pairing with mobile devices. 6. Run your desired sleep program. 7. Lie down on the pillow and rotate the dome door.
• Specification • Bluetooth 5.0 2.402GHz ~ 2.480GHz • DAC Chipset TI PCM5102A 24bit, 192KHz • Speaker Unit : 2.5 inch 10W, 4 Ohm, 70-10,000Hz Frequency Range. • Power : DC 12V (Apply Core) • Operating Temperature : -20º C to 50º C Notice The power line of this product includes a ferrite core to reduce electromagnetic waves. Please use only the cables that are included in the product. The product already includes cables with a one-turn core. Please Insert the core into the power line by one turn.
