Datasheet

ManualsBrandsE+E Elektronik ManualsAccessoriesImmersion Sleeve R1/2" 135mm

v1.3 / Modification rights reserved

EE431EE431

The EE431 temperature sensor is used for air temperature

measurement in heating, ventilation and air conditioning

systems. It can be installed either with mounting flange or via

external mounting holes at the enclosure (duct sensor).

For temperature measurement in liquids the temperature sen-

sor EE431 is mounted with an immersion well (immersion sen-

sor).

In addition to active outputs 0-10 V or 4-20 mA various types of

sensing elements such as Pt1000, NTC10k or Ni1000 are avai-

lable for passive temperature measurement.

The innovative IP65 housing and the mounting concept allow

for fast and easy installation.

The optional adapter EE-PCA and the free configuration software EE-PCS facilitate the adjustment and setup of the

active temperature sensors.

EE431

Duct / Immersion Temperature Sensor

EE431

EE431 +

Immersion Well

EE431 + Mounting Flange

Active Output

Operating temperature duct sensor (probe): -40 °C…+110 °C (-40 °F...+230 °F)

immersion sensor (probe): -40 °C…+150 °C (-40 °F...+302 °F)

electronics: -40 °C…+70 °C (-40 °F...+158 °F)

Sensing element Pt1000 (class A, DIN EN60751)

Output 0-10 V -1 mA < I

< 1 mA

4-20 mA (two-wire) R

< 500 Ω

Accuracy ±0.3 °C

(±0.54 °F) at 20 °C (68 °F)

Supply voltage (Class III)

for 0-10 V 15-35 V DC or 24 V AC ±20%

for 4-20 mA 10 V DC + R

x 20 mA < V+ < 35 V DC

Current demand DC: typ. 5 mA

AC: typ. 12 mA

eff

Electromagnetic compatibility EN61326-1, EN61326-2-3

industrial environment

Technical Data

Building automation

Process and climate control

Measurement in air and liquids

Typical Applications

Features

External mounting holes

» Mounting with closed cover

» Protection against construction

site pollution

Bayonet screws

» Open/closed with a ¼ rotation

Fixation via clamping

» No direct screwing onto probe

» Inclined screw for easy installation

Special sealing

» Foam gasket for good tightness

» No scratching of probe due to

alignment notch

Mounting flange

Immersion well

Innovative mounting spring

» For securing the probe inside the well

» No fastening screw, no tools required

Summary of content (3 pages)

PAGE 1
EE431 Duct / Immersion Temperature Sensor The EE431 temperature sensor is used for air temperature measurement in heating, ventilation and air conditioning systems. It can be installed either with mounting flange or via external mounting holes at the enclosure (duct sensor). EE431 + Mounting Flange For temperature measurement in liquids the temperature sensor EE431 is mounted with an immersion well (immersion sensor).
PAGE 2
Passive Output Operating temperature (probe) Types of T-Sensors -40 °C…+110 °C (-40 °F...+230 °F) -40 °C…+150 °C (-40 °F...+302 °F) for immersion sensor with Pt and Ni T-sensors Sensor Type Pt100 DIN B Nominal Resistance Sensitivity Standard R0: 100 Ω TC: 3.850 x 10-3/°C DIN EN 60751 Pt1000 DIN B R0: 1000 Ω TC: 3.850 x 10-3/°C DIN EN 60751 NTC10k R25: 10 kΩ ± 0.5 % B25/85: 3989 K (B25/50: 3950 K ± 1.0 %) - NTC1.8k Ni1000 TK6180 DIN B Ni1000 TK5000 DIN B R25: 1.8 kΩ ± 0.
PAGE 3
Dimensions in mm (inch) Temperature Sensor Mounting Accessories Mounting ﬂange Immersion well ) *) 8 L*) drilled hole for mounting: Ø>9 (Ø>0.35) 14 (0.55) L*) Ø6 (0.24) Ø5 (0.2) 39.5 (1.56) 56 (2.2 (0.31) width across ﬂats: 22 (0.87) Ø4 (0.16) 55.3 (2.18) 42 (1.65) 55.3 (2.18) 63 (2.48) R ½’’ ISO and ½’’ NPT: 80.8 (3.18) Ø8 Length according to ordering guide (0.