FE-560 User Manual 2020-01-03 DEVICE OPERATION < Transmitter> ④ LED Indicator ① L‐Button (Lighting Control) ⑤ S(Black)‐Button (Asigned Func. for Dog1 in 2Dog Mode) ⑥ S(Red)‐Button (1Dog mode: Asigned Func. for Dog1 2Dog mode: Asigned Func. for Dog2) ② R‐Button (Rising Speed set) ⑦ LCD Display ③ Micro‐B USB Charger port ⑪ Program‐Button (Enter Program Mode Hold pressing for 2sec. ‐> P1 Mode Hold Pressing for 3sec. ‐> P2 Mode @ stim. Level 0 for each Dog No.
CHARGING THE BATTERIES Indicator Light is blinking “Green” under normal operation. solid “Red” when stimulation is applied. blinking “Red” when recharging is required. Do not allow the batteries to get hot or be fully discharged, store at room temperature and 50% capacity charge. Transmitter Battery Charging The Micro-B USB charging cable can be used to charge the product. Micro‐B USB Charger port The indicator light will turn solid red during charge cycles and turn green if it is fully charged.
POWER ON/OFF Transmitter can be turned on and off by pressing the Power-Button. Power‐Button - Power ON: When the TX power is off, press the power button for more than 0.5 seconds to turn Transmitter on. [ LCD Display] Display currently set Stimulation Level - Power OFF: When Transmitter power is on, press power button for more than 1.5 seconds to turn Transmitter off. [ LCD Display ] Power is turned off after "OF" is displayed.
THE LCD DISPLAY DESCRIPTION [All LCD Display] ● LCD Display Display Description Indicate Dog1 / Dog2 in 2Dog Mode (Only 1D is displayed in 1Dog mode) - 1D : Dog1 - 2D : Dog2 (1) Indicate Current Stimulation Level in Standby and Stimulation Mode ("0~HI" Level ) (2) Displaying text for other settings and operations Indicate HI-Vibration Indicate LOW-Vibration Indicate Tone Indicate Rising Stimulation and Step to Increase Stimulation Level 4/21
FUNCTION DESCRIPTION ● Function Description - Stimulation While the button is pressed, the stimulation with currently set stimulation level is transmitted. (Maximum operating time : 10 seconds) - Rising Stimulation While the button is being pressed, it transmits an operation signal whose level increases from the currently set stimulation level to the stimulation max level for a defined time interval. (Stimulation Max Level and time interval can be set separately.
BUTTON OPERATION - 1DOG MODE ● 1Dog Mode Button Function S(Black)-Button Stimulation Description LCD Display Stimulation (Current Level) Stimulation (Current Level) Rising Stimulation Asigned Function (Current Level) in P1 S(Red)-button for 1Dog Mode Tone or Tone followed by Stimulation - Stimulation * Level "0" : Tone only - Rising Stim.
Select time to reach at Max Level in R-Button Rising Rising Stimulation mode. Stimulation (Each pressing the button, Time Set "0 sec->1 sec->2 sec-> 5 sec-> 1 sec ...
at Level = 0 + Change Program-Button 1Dog / 2Dog + Mode (1Dog mode) Change 1Dog -> 2Dog mode (toggle) (+)-Button (2Dog mode) BUTTON OPERATION - 2DOG MODE ● 2Dog Mode Button Function Description LCD Display Dog1 Stimaultion (Dog1 Current Level) Asigned Function Dog1 Rising Stimulation (Dog1 Current Level) (Set Max Level) in P1 for Dog 1 - Stimulation S(Black)-Button - Rising Stim - Tone - LOW-Vibration - HI-Vibration Dog1 Tone or Tone followed by Stimulation * Level "0" : Tone only * Level
Dog1 HI-Vibration BUTTON OPERATION - 2DOG Dog2 Stimaultion (Dog2 Current Level) Asigned Function Dog2 Rising Stimulation in P1 for Dog2 - Stimulation S(Red)-button - Rising Stim - Tone - LOW-Vibration (Dog2 Current Level) (Set Max Level) Dog2 Tone or Tone followed by Stimulation * Level "0" : Tone only * Level "1~HI : Tone followed by Stimulation - HI-Vibration Dog2 LOW-Vibration Dog2 HI-Vibration Select Dog1 Light operation when displaying 1D on LCD Press the button within 1 second.
Dog2 Light OFF when 2D is displayed on LCD * Pressing the Light OFF button for more than 1 second regardless of the current Light mode. (Dog2 Light OFF) When Dog1 is displayed on the LCD Dog1 Select time interval to the maximum Rising level in Dog1 Rising Stimulation. Stimulation Time Set (Each time button is pressed, "0 sec->1 sec->2 sec->5 sec->0 sec ..." toggles in turn) R-Button When Dog2 is displayed on the LCD Dog2 Select time interval to the maximum Rising level in Dog2 Rising Stimulation.
at Level = 0 + Program-Button + When the button is pressed for more Programming mode mode. (Release the button to enter the mode) over 2 sec Dog1 R1(+), R2(-) Program-Button than 2 seconds, it enters programming Level Button Lock When 1D is displayed on the LCD, Level-Button Lock is set and released in ( When pressing the Level Button with the Level Button Lock On) toggle.
at Level = 0 + Change Program-Button 1Dog / 2Dog + Mode (1Dog mode) 1Dog-> 2Dog mode change (toggle action) (+)-Button (2Dog mode) PROGRAMMING MODE - Press Program-Button at Level 0 for more than 2 seconds and release the button to enter Programming mode-1 (P1). - If keep pressing the button for 1 second more without releasing button, can enter Programming mode-2 (P2). (When enter the programming mode, the LCD display shows "P1 -> P2" in order and release the Program-button to set the mode.
< 1Dog Mode > - In Programming mode, the function of S(Red)-Button for Dog1 can selected by pressing S(Red)-Button. - Pressing the Program-Button saves the current settings and exits from Programming mode.
Program Stimulation & Rising Stimulation Max Level for Dog1 P2 Program Stimulation & Rising Stimulation Max Level for Dog2 * Setting stimulation level Increasing step - Stimulation level is increased by each pressing (+)-Button as much as level increasing step which can be set by one of 1, 5 and 10 steps. (Default setting is 5 steps.) - Setting Procedure 1. Enters P1 mode. 2.
RISING STIMULATION It is possible to increase the voltage from the current stimulus level to the set maximum stimulus level in preparation for the cognitive stimulus intensity setting or emergency of the dog. <1Dog Mode> ● Rising Stimulation Operation - Press the Rising Stimulation button to increase the stimulus output from the current stimulus level up to the maximum stimulus level. - The time to reach the maximum stimulus level can be set by pressing the R-Button.
RISING STIMULATION <2Dog Mode> ● Rising Stimulation Operation - Press the Rising Stimulation button to increase the stimulus output from the current stimulus level up to the maximum stimulus level. - The time to reach the maximum stimulus level can be set by pressing the R-Button. ● Rising Stimulation Operation Button - Dog1 Operation Button - Press Stimulation (Black) -Button and Program-Button with the current stimulus level not "0".
STIMULATION LEVEL BUTTON LOCK/UNLOCK The stimulation level set by the user can be fixed ● Stimulation Level Button Lock - Press (-)-Button while pressing Program-Button to set Stimulation Level Button Lock function. - When the Stimulation Level Button Lock function is activated, pressing the Stimulation Level Up / Down Button generates a buzzer sound and the Stimulation Level can not be adjusted.
PAIRING 1. Power on Transmitter. 2. Change Transmitter Stimulation Level to "0" using (-)-Button. 3. Power off Receiver 4. Press and hold the Power-button on the Receiver and release the button when the Receieer LED indicator flashes green. 5. Hold down (-)-Button on the Transmitter and press L-Button. 6. Pairing is completed with buzzer sound of Receiver.
< Receiver > ② Battery Charging ① 5/8" Contact Points Receptacle and Rubber Cover ③ ON/OFF Power‐Button ④ LED Indicator & Light Window ① 5/8" Contact Point ② Battery Charging Receptacle and Rubber Cover ③ Power-Button : Recveiver Power ON/OFF ④ LED Indicator & Light Window : Battery indicator & Light ⑤ Collar Strap 19/21 ⑤ Collar Strap
Collar Receiver Battery Charging Receptacle and Rubber Cover.
Collar Receiver can be turned on and off by pressing the Power-Button. Power‐Button - Power ON : When the receiver is off, press the Power-Button for more than 1 second to turn it on. - Power OFF : When the receiver is on, press the Power-Button for more than 1 second to turn it off.