E-Collar Technologies Incorporated FOB Educator FE-560A (FE-560A-TX, RX-050) FE-562A (FE-560A-TX, RX-050, RX-050)
Welcome to the World of E-Collar Technologies Incorporated FE-560A Series E-Collar FE-560A or FE-562A E-Collar Technologies Incorporated.
- Important Notice . . . . . . . . . . . ....................................... - Characteristics . . . . . . . . . . . . ....................................... - Package Contents . . . . . . . . . ....................................... - Device Operation . . . . . . . . . ........................................ - Charging the Batteries . . . . . ....................................... - Turning Your E-collar ON/OFF ..................................... - Correctly Fitting Collar . . . . . .............
This product is intended to be used on DOGS ONLY. E-Collar Technologies Incorporated is not responsible for any misuse of this Product including damages from dog bites and lost items. Seek an evaluation by professional trainer before use on aggressive dogs. It is not uncommon for aggressive dogs to associate the stimulation with the handler and take action against the handler. Sometimes dogs put under e-collar pressure during a fight can exhibit redirected aggression and become more aggressive.
Range : 300 Yards Two Stimulation Modes (Continuous/Rising Stimulation) 3 Functions Settable Front Button (Tone/Vibrations/Stimulation) Tapping Sensation or Tone Stimulation (Pavlovian Conditioning) Tapping Sensation: Alternative to Stimulation (vibration similar to a Cell Phone) Tone Stimulation: Afrer 1.
• Transmitter • Finger Trainer Collar Receiver with Strap (FE-562A Package includes 2 Receivers and straps) (FE-562A FE-560A/562A Owner’s Manual
̡ LED Indicator ̞ -Button (Lighting Control) ̟ -Button (Rising Speed set) ̠ Micro-B USB Charger port ̥ -Button (Stimulation Level Up) ̦ -Button (Stimulation Level Down) ̢ (Black)-Button (Assigned Func. for Dog1 in 2Dog Mode ̣ (Red)-Button (1Dog mode: Assigned Func. for Dog1, 2Dog mode: Assigned Func. for Dog2) ̤ LCD Display ̨ Program-Button (Enter Program Mode Hold pressing for 2sec. -> Mode Hold Pressing for 3sec. -> Mode Hold Pressing for 4sec. -> Mode @ stim. Level 0 for each Dog No.
07 DEVICE OPERATION ̞ 5/8" Contact Point ̟ Battery Charging Receptacle Rubber Cover ̠ Power-Button ̢ Collar Strap ̡ LED Indicator & Light Window ̞ 5/8" Contact Point ̟ Battery Charging Receptacle and Rubber Cover ̠ Power-Button : Recveiver Power ON/OFF ̡ LED Indicator & Light Window : Battery indicator & Light ̢ Collar Strap FE-560A/562A Owner’s Manual
08 CHARGING THE BATTERIES Indicator Light is blinking “Green” under normal operation. solid “Red” when stimulation is applied. blinking “Red” when recharging is required. Do not allow the batteries to get hot or be fully discharged, store at room temperature and 50% capacity charge. Transmitter Battery Charging The Micro-B USB charging cable can be used to charge the product. Micro-B USB Charger port The indicator light will turn solid red during charge cycles and turn green if it is fully charged.
09 CHARGING THE BATTERIES Collar Receiver Battery Charging Receptacle and Rubber Cover.
10 TURNING YOUR TRANSMITTER ON/OFF Transmitter can be turned on and off by pressing the Power-Button. Power-Button - Power ON : Press the power button for more than 0.5 seconds to turn Transmitter on. [ LCD Display ] 1D 2D V v T + 1D Display currently set Stimulation Level - Power OFF : Press power button for more than 1.5 seconds to turn Transmitter off. [ LCD Display ] Power is turned off after "OF" is displayed.
11 TURNING YOUR RECEIVER ON/OFF Power-Button Collar Receiver can be turned on and off by pressing the Power-Button. - Power ON : Press the Power-Button for more than 1 second to turn it on. - Power OFF : Press the Power-Button for more than 1 second to turn it off.
12 FE-560A/562A Owner’s Manual
13 560A THE LCD DISPLAY DESCRIPTION [ LCD Display ] V v T + 1D Display 1D Description Indicates Dog 1 (1) Indicates Current Stimulation Level in Standby and Stimulation Mode ("0~HI" Level ) (2) Displays text for other settings and operations V Indicates HI-Vibration v Indicates LOW-Vibration T Indicates Tone + Indicates Rising Stimulation and Step to Increase Stimulation Level FE-560A/562A Owner’s Manual
14 560A FUNCTION DESCRIPTION - Stimulation While the button is pressed, the preset stimulation level is transmitted. (Maximum operating time : 10 seconds) - Rising Stimulation While the button is pressed, the level increases from the currently set stimulation level to the set max level for a predetermined time interval. (Stimulation Max Level and time interval can be set separately.) - Vibration While the button is pressed, it transmits a vibration. Two vibration modes available.
15 560A BUTTON OPERATION Button Function Description LCD Display 1D Stimulation (Current Level) Black Assigned Function in for 1Dog Mode - Stimulation - Rising Stimulation - Tone - LOW-Vibration - HI-Vibration 1D + (Current Level) Rising Stimulation 1D + (Set Max Level) Tone or Tone followed by Stimulation * Level "0" : Tone only * Level "1~HI" : Tone followed by Stimulation 1D T v 1D LOW-Vibration 1D HI-Vibration V 1D Stimulation (Current Level) Red Assigned Function in for 1Dog Mo
16 560A BUTTON OPERATION Button Function Description Select Light Operation Press the button within 1 second. flickering - steady - off in turn Light ON/OFF Light OFF * Press the -button for more han 1 second or longer to power light off. LCD Display 1D 1D 1D Rising Stimulation Time Set Select time to reach Max Level in Rising Stimulation mode. (By pressing and releasing the -button. "0 sec->1 sec-> 2 sec-> 5 sec->1 sec ...
17 560A BUTTON OPERATION Button Function Description LCD Display Stimulation Level = 0 When the Program Button + is pressed for 2 seconds it enters Program , holding for an additional + Programming 1 second it will enter , 2 Seconds Mode and holding for an additional 3 Seconds 1 second it will enter . 4 Seconds 1D + Program + Black (Current Level) Rising Activates Rising Stimulation.
18 560A BUTTON OPERATION Button Function Stimulation Level = 0 + Pairing + Description LCD Display Pairs / Syncs collar receiver to transmitter. 1D 1D Stimulation Level = 0 + Program Change Changes from 1Dog mode to + 1Dog / 2Dog 2Dog mode and vice versa.
19 560 PROGRAMMING MODE * How to enter program mode (1) After adjusting the stimulation level to "0", press and hold the -button on the back of transmitter for 2 seconds to enter the program mode. (2) If you keep holding the button while entering the program mode, the LCD display cycles every 1 second in the order of " ൺ ൺ ൺ ...". Press and hold the -button to display the mode you want to set. Release to enter the setting mode. LCD Display Press 2 seconds after pressing the button...
20 560A PROGRAMMING MODE - In the program mode, the functions of the (Black)-button and (Red)-button can be set respectively. - After setting the function of each button, press the -button to save the changes and exit the program mode. MODE Setting Value LCD Display Sets the maximum stimulation level. (Settable level : 5 ~ HI) * Set the level value with , -button. 1D 1D Sets the operation function of the (Black)-button.
21 560A PROGRAMMING MODE * If the maximum level limit is set in , it will not go above the set value when raising the stimulation level with the -button. * Setting stimulation level Increasing step - You can increase the stimulation level by using the -button. (The default setting is "5" , and can be set to "1" or "10"..) - Setting Procedure 1. Enter " " in program mode. 2. Press the (Black)-button to select the " " icon. 3.
22 HOW TO FIND THE PROPER STIMULATION LEVEL The stimulation level increases Stimulation when you press -Button and the Level Increase stimulation level decreases when Stimulation you press -Button Level Decrease 12 FE-560A/562A Owner’s Manual
23 560A STIMULATION LEVEL BUTTON LOCK/UNLOCK The stimulation level set by the user can be locked and unlocked. Stimulation Level Button Lock - Holding down -Button and pressing -Button at the same time to activate the Stimulation Level Button Lock function when "1D" icon on the LCD display is blinking (Stimulation Level Button Unlock Status). - After the Stimulation Level Button Lock function is activated, the "1D" icon on the LCD changes solid.
24 RISING STIMULATION It is possible to increase the stimulation from the current level to the set maximum level. Rising Stimulation Operation - Press the Rising Stimulation button to increase the stimulation from the current level to the maximum level. - The time to reach the maximum stimulation level can be set by pressing the -Button. Rising Stimulation Operation Button - Press Stimulation (Black)-Button and -Button with the current stimulation level not "0".
25 REPLACE/ADD COLLAR Occasionally, it is necessary to pair/sync a transmitter to a collar receiver, the following procedure will accomplish this. 1. Turn on the Transmitter 2. Set the stimulation level at “0” 3. Make sure Receiver is turned off. 4. Press the Collar Receiver’s Power-Button for more than 5 seconds until green light on receiver flashes rapidly. 5. Immediately after, press and hold -button followed by the -button until you hear confirmation sound from collar receiver.
26 562A LCD DISPLAY DESCRIPTION [ LCD Display ] V v T + 1D 2D Display 1D 2D Description Indicates Dog1 / Dog2 in 2Dog Mode - 1D : Dog1 - 2D : Dog2 (1) Indicates Current Stimulation Level in Standby and Stimulation Mode ("0~HI" Level ) (2) Displays text for other settings and operations V Indicates HI-Vibration v Indicates LOW-Vibration T Indicates Tone + Indicates Rising Stimulation and Steps to Increase Stimulation Level FE-560A/562A Owner’s Manual
27 562A FUNCTION DESCRIPTION - Stimulation While the button is pressed, the preset stimulation level is transmitted. (Maximum operating time : 10 seconds) - Rising Stimulation While the button is pressed, the level increases from the currently set stimulation level to the set max level for a predetermined time interval. (Stimulation Max Level and time interval can be set separately.) - Vibration While the button is pressed, it transmits a vibration. Two vibration modes available.
28 562A BUTTON OPERATION Button Function Description LCD Display 1D Dog1 Stimaultion (Dog1 Current Level) Black Assigned Function in for Dog 1 Dog1 Rising Stimulation 1D 1D + + (Dog1 Current Level) (Set Max Level) Dog1 Tone or Tone followed by Stimulation * Level "0" : Tone only * Level "1~HI" : Tone followed by Stimulation 1D - Stimulation - Rising Stimulation - Tone - LOW-Vibration Dog1 LOW-Vibration - HI-Vibration T v 1D V 1D Dog1 HI-Vibration Dog2 Stimaultion 2D (Dog2 Current Lev
29 562A BUTTON OPERATION Button Function Description LCD Display Select Dog1 Light operation when displaying 1D on LCD Press the button within 1 second. flickering - steady - off in turn Select Dog2 Light operation when displaying 2D on LCD Press the button within 1 second. flickering - steady - off in turn Dog1 and Dog1 Light OFF when 1D is Dog2 on LCD Light ON/OFF displayed * Press the -button for more than 1 second or longer to power light off.
30 562A BUTTON OPERATION Button Function Description Dog1 When 1D is displayed on the LCD Stimulation Dog1 Stimulation Level UP/DOWN Level UP/DOWN LCD Display 1D (0~HI) / Dog2 2D is displayed on the LCD Stimulation When Level UP/DOWN Dog2 Stimulation Level UP/DOWN 2D (0~HI) V v T + 1D 2D Power ON/OFF Press and hold Power button for more than 1 second to turn power on. 1D (Set Level) Press and hold Power button for more than 1.5 seconds to turn power off.
31 562A BUTTON OPERATION Button Function Description LCD Display - When"1D" icon on the display is blinking, pressing the Lock button and button at the , same time will activate the Level for Level Lock function. Dog1 icon changes from blinking when "1D" - to"1D"solid. icon is - Pressing or button after blinking Level Lock function is activated, in the display. the stimulation level does not change and only beeps.
32 562A BUTTON OPERATION Button Function Description LCD Display 1D Program + Dog1 Rising Stimulation + (Current Level) Dog1 Rising Stimulation 1D + (Black) (Set Max Level) + 2D Program + Dog2 Rising Stimulation (Current Level) Dog2 Rising Stimulation + 2D (Red) (Set Max Level) Stimulation Level = 0 + Dog1 Pairing When 1D is displayed on the LCD, Execute Pairing for Dog1 Dog2 Pairing When 2D is displayed on the LCD, Execute Pairing for Dog2 1D + 2D 1D Stimulation Level = 0 + Prog
33 562A PROGRAMMING MODE * How to enter program mode (1) After adjusting the stimulation level to "0", press and hold the -button on the back of transmitter for 2 seconds to enter the program mode. (2) If you keep holding the button while entering the program mode, the LCD display cycles every 1 second in the order of " ൺ ൺ ൺ ...". Press and hold the -button to display the mode you want to set. Release to enter the setting mode. LCD Display Press 2 seconds after pressing the button...
34 562A PROGRAMMING MODE - In the program mode, the setting of 1D (DOG1) can be selected by pressing the (Black)-button, and the setting of 2D(DOG2) can be selected by pressing the (Red)-button. - After setting the function of each button, press the -button to save the changes and exit the program mode. MODE Setting Value LCD Display The maximum level limit of the DOG1 stimulation can be set. (Settable level : 5 ~ HI) * Select 1D(DOG1) with (black)-button. * Set the level value with , -button.
35 562A PROGRAMMING MODE MODE Setting Value LCD Display 2D Sets the operation function of the (Red)-button (Dog2). (Stimulation ൺ Rising Stimulation ൺ Tone ൺ LOW Vibration ൺ HIGH Vibration) + 2D 2D T Select the mode by pressing (Red)-Button v 2D V 2D * If the maximum level limit is set in , it will not go above the set value when raising the stimulation level with the -button. * -button stimulation level increase value setting - You can increase the stimulation level by using the -button.
36 562A PROGRAMMING MODE 2. DOG2 setting 2-1. Enter " " in program mode. 2-3. Press the -button to display the desired setting among "1+", "5+" and "10+". 2-4. Press the -button to save changes and exit program mode. Increasing Level Operation 1 Press the -button to increase the stimulation level by 1. 5 10 Press the -button to increase the stimulation level by 5. Press the -button to increase the stimulation level by 10.
37 562A PROGRAMMING MODE * Setting stimulation level Increasing step - You can increase the stimulation level by using the -Button (The default setting is "5" , and can be set to "1" or "10"..) - Setting Procedure 1. Enters mode. 2. To select Stimulation Mode for Dog1, press (Black)-Button until . To select Stimulation Mode for Dog2, LCD shows in mode. press (Red)-Button until LCD shows 3. Press the -button to display the desired setting among "1+", "5+" and "10+". 4.
38 562A STIMULATION LEVEL BUTTON LOCK/UNLOCK The stimulation level for Dog 1 and Dog 2 set by the user can be locked and unlocked. Stimulation Level Button Lock [Dog 1 setting] - Holding down -Button and pressing -Button at the same time to activate the Stimulation Level Button Lock function for Dog 1 when "1D" icon on the LCD display is blinking (Stimulation Level Button Unlock Status). - After the Stimulation Level Button Lock function for Dog 1 is activated, the "1D" icon on the LCD changes solid.
39 562A STIMULATION LEVEL BUTTON LOCK/UNLOCK Button Function Description LCD Display - When"1D" icon on the display is blinking, pressing the Lock button and button at the , same time will activate the Level for Level Lock function. Dog1 when - "1D" icon changes from blinking to solid. "1D" icon is blinking - Pressing or button after Level Lock function is activated, in the display. the stimulation level does not change and only beeps.
40 562A RISING STIMULATION Rising Stimulation Operation - Press the Rising Stimulation button to increase the stimulation from the current level to the maximum level. - The time to reach the maximum level can be set by pressing the -Button. Rising Stimulation Operation Button - Dog1 Operation Button • Press Stimulation (Black)-Button and stimulation level not "0". • In programming mode, set Stimulation press Stimulation (Black)-Button.
41 562A RISING STIMULATION Dog1 Setting : In standby mode, press -Button to display 1D and press -Button to set time. 1D 1D LCD Display 1D 1D 1D 1D 1D 1D Description When the button is pressed, it immediately outputs the maximum stimulation level.(Dog1 Stimulation boosting mode) It takes 1 second to reach the maximum stimulation level from the current stimulation level. It takes 2 second to reach the maximum stimulation level from the current stimulation level.
42 TESTING YOUR E-COLLAR as the stimulation level increases.
43 REPLACING THE CONTACT POINTS FE-560A/562A Owner’s Manual
44 FINGER TRAINER Finger Control Button LED Indicator Antenna Marking Velcro Band Ther is no power switch on Finger Trainer because it is always turned on. To minimize battery consumption, it will enter standby mode after 2 hours inactivity. If Finger Control Button is pressed during standby mode, it exits from standby mode. * Cautions : To reduce antenna interference, make sure your fingers do not cover the antenna markings.
45 PAIRING FINGER TRAINER WITH TRANSMITTER 1. Prepare Transmitter and Finger Trainer for pairing. Finger Trainer Transmitter 2. While holding down the control button on the Finger Trainer, turn on Transmitter Push Control Button Push Light Button to turn on Transmitter 3. Release the stimulation button on the Finger Trainer when transmitter is turned on.
46 PAIRING FINGER TRAINER WITH TRANSMITTER 4. Check for successful pairing (Collar Receiver is not to be on the Dog) (1) Turn Transmitter stimulation dial to any value other than "0". (2) Press the Finger Trainer control button and make sure the Transmitter is activating the collar receiver. (Stimulation Button (Black S1) is the factory default setting.
47 CHANGING THE BUTTON THE FINGER TRAINER CONTROLS ON THE TRANSMITTER The Finger Trainer can be set to control any one of the 2 Buttons of the Transmitter, S1(Black) S2(Red) and T Button. - How to set the Finger Trainer to control different Transmitter buttons. Simply push the desired Transmitter Button simultaneously with the POWER button.
48 OPERATING DISTANCE AND BATTERY OF FINGER TRAINER - Operating distance between Finger Trainer and Transmitter is maximum 12 feet. - CR2032 3 Volt Lithium Battery is used. - To replace battery, simply remove the 4 small screws on the back of the Finger Trainer.
49 TRAINING TIP Technologies Incorporated E-Collar Technologies Incorporated FE-560A/562A Owner’s Manual
50 TROUBLESHOOTING (Page 25) page 11 press -Button while pressing -Button.
51 TWO YEAR WARRANTY FE560/562 www.ecollar.
52 FE-560A/562A Owner’s Manual
53 FE-560A/562A Owner’s Manual
54 SAFETY AND GENERAL INFORMATION FE-560A/562A Any change or modification made to the transmitter, including the supplied antenna, without the expressed written approval of E-Collar Technologies Incorporated could void your authority to operate.
FE-560A/562A Owner’s Manual
FE-560A/562A Owner’s Manual
E-Collar Technologies Incorporated Copyright 2020 E-Collar Technologies Incorporated