User's Manual

ManualsBrandsDyzle Services ManualsElectronicsBattery operated wireless temperature / Door monitoring unit / Thermal couple unit

Dyzle BV, 2d Transistorstraat, 1322 CE Almere (NL), Tel.: +31(0)36-5233900, Fax: +31(0)36-5233999

User Manual for:

Y-Tag Door Monitor 2.0

Product code 030 1001 002

Version 1.3, March 2015

Summary of content (4 pages)

PAGE 1
User Manual for: Y-Tag Door Monitor 2.0 Product code 030 1001 002 Version 1.3, March 2015 © 2015 Dyzle Dyzle BV, 2d Transistorstraat, 1322 CE Almere (NL), Tel.: +31(0)36-5233900, Fax: +31(0)36-5233999 © 2015 Dyzle User Manual for Y-Tag Door Monitor 2.0, version 1.
PAGE 2
Foreword This User Manual is intended for users and installers of the Y-Tag Door Monitor 2.0. Read the User Manual thoroughly before proceeding to install or use of the Y-Tag Door Monitor 2.0. This product is delivered exclusively to businesses and may only be installed and operated by installers who have been trained by Dyzle. This User Manual makes reference to the Dyzle Hardware Installation Manual. This document provides information on installation and maintenance of the Y-Tag.
PAGE 3
General description of the Y-Tag Door Monitor 2.0 The Dyzle Y-Tag Door Monitor 2.0 is a wireless, water-resistant (IP67) sensor that registers whether a door is opened or closed. A magnetic door switch is connected to the Y-Tag Door Monitor. The Y-Tag Door Monitor 2.0 sends the status information every five minutes (open / opened / closed / locked) to the Y-Gate by way of a wireless connection. The Y-Tag Door Monitor 2.0 checks whether the current status has changed, every 3 seconds.
PAGE 4
Making the device operational and resetting it A new Y-Tag must first be made operational By pressing the reset button twice: first press and release, then press and hold until the LED lights up; When the Y-Tag has established a connection with the Y-Gate, the Y-Tag will flash every 3 seconds. This may take several minutes; If the Y-Tag fails to establish a connection, try to reset it. You reset the Y-Tag by pressing the reset button once.