User's Manual

ManualsBrandsDyzle Services ManualsElectronicsBattery operated wireless PT100 temperature unit

Dyzle BV, 2d Transistorstraat, 1322 CE Almere (NL), Tel.: +31(0)36-5233900, Fax: +31(0)36-5233999

User Manual for:

Y-Tag PT 100 1.0

Product code 020 1501 001

Version 1.3, March 2015

Summary of content (5 pages)

PAGE 1
User Manual for: Y-Tag PT 100 1.0 Product code 020 1501 001 Version 1.3, March 2015 © 2015 Dyzle Dyzle BV, 2d Transistorstraat, 1322 CE Almere (NL), Tel.: +31(0)36-5233900, Fax: +31(0)36-5233999 © 2015 Dyzle User Manual for Y-Tag PT 100 1.0, version 1.
PAGE 2
Foreword This User Manual is intended for users and installers of the Y-Tag PT 100 1.0. Read the User Manual thoroughly before proceeding to install or use the Y-Tag PT 100 1.0. This product is delivered exclusively to businesses and may only be installed and operated by installers who have been trained by Dyzle. This User Manual makes reference to the Dyzle Hardware Installation Manual. This document provides information on installation and maintenance of the Y-Tag PT 100 1.0.
PAGE 3
Notification service in the event of a temperature exceedance by email, premium SMS or IVR*; Automated HACCP / QA reports. * For Interactive Voice Response (IVR): ask the support department about the possibilities. General description of the Y-Tag PT 100 1.0 The Dyzle Y-Tag PT 100 1.0 integrates temperature measurements that are taken with a PT100 in the Dyzle solution. The PT 100 is connected to the Y-Tag PT 100 1.0 through a connection cable. The YTag PT 100 1.
PAGE 4
Remark: The measuring current runs through the +/- PT100 connection. The sense pins measure the voltage thus passing through the PT100. The 4-wire detection results in a separation between current and voltage, which allows the ohmmeter / electrical resistance meter to exclude the influence of cable resistance for a more accurate measurement result.
PAGE 5
Declaration of conformity - FCC This device complies with part 15 of the FCC Rules. The following conditions apply for use of this device: 1) This device may not cause any harmful interference and 2) this device must accept incoming interference, including interference that could possibly cause an undesired effect. Declaration of conformity for the European Union Dyzle herewith declares that this wireless device complies with the essential requirements and other relevant provisions of the R&TTE Directive.