User manual Getting started Assembling your machine Connecting to the Dyson Link app Filling the water tank Power and continuous monitoring Information menu Auto purify mode Auto humidify mode Oscillation Airflow speed and direction Sleep timer Night mode Deep cleaning your machine Changing your HEPA+Carbon filter Looking after your machine Alerts SV12 JN.00000 PN.000000-00-00 00.00.00 VERSION NO.
Getting started Image of the machine with the location of parts labelled. The top, of the two buttons located on the main body of the machine just below the loop amplifier, is the Deep clean cycle button. Amplifier loop The large oval loop making up the top of the machine. Deep clean cycle button Stand-by button Below the Deep clean cycle button is the standby button. Outer cover release buttons Two push down buttons located either side of the main body of the machine.
Assembling your machine The purifying humidifying fan with the filter covers open showing a HEPA plus carbon filter located in the filter covers and a catalytic filter. Arrows demonstrate that the catalytic filter is fitted directly to the base of the machine and the filter covers will need to be assembled onto the base of the machine. clik clik Use both hands to lift your machine out of the box, by its base. Do not lift out by the loop amplifier. Assemble your machine with the filters that are supplied.
Connecting to the Dyson Link app Take full control with the Dyson Link app and access step-by-step set up and support, control how and when your Dyson purifying fan operates, monitor air quality with visual updates and automatically keep up to date with the latest software updates. Download the Dyson Link app from the App Store or Google Play. Open the app and follow the on-screen instructions to create a new account. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.
Filling the water tank Before you remove the water tank, make sure humidification modes are turned off and the water tank is empty. Keep the cap dry Keep the cap on the water tank dry when you run a Deep clean cycle or fill the tank. It contains power connections and should not be washed. If wet, wipe thoroughly with a dry cloth. Make sure the cap and connections are completely dry before refitting. The water tank cap has two lips either side that can be pulled upwards to release the cap.
Power and continuous monitoring Stand-by on/off Press the Standby on/off button on your Dyson purifier humidifier fan or remote control to stop your machine. It will continue to monitor the air quality. Continuous monitoring Continuous monitoring is turned off by default. Once turned on, it will always be active until you turn it off again.
Information menu Press this button to scroll through the information being monitored by your Dyson purifying humidifying fan. Information about air quality, temperature, humidity. Filter and evaporator levels are shown. When a particular type of pollutant causes air quality to decrease, an icon for the pollutant will show on the LCD screen. The remote control with the information button on the top right.
Auto purify mode Set your Dyson purifying humidifying fan to Auto purify mode and the onboard sensors will intelligently adjust the settings of your machine according to the air quality. Air quality: your machine will pause when the target air quality has been reached, switching on again when the air quality levels drop. The remote control with the Auto purify button on the left hand side, below the Standby button.
Airflow speed and direction Press the Airflow speed button to increase and decrease the airflow speed. Press the Airflow direction button to change the direction of airflow from front to back. Change the airflow direction for your personal comfort. Select the Airflow direction to Fan mode for airflow from the front for purifying and cooling. Set the Airflow direction to Backwards airflow mode, for airflow from the bock for purifying without cool air.
Deep cleaning your machine To always get the best performance from your Dyson purifying humidifying fan, it is important to carry out regular deep cleaning to remove any mineral build-up. Before and after long periods where humidification is not used, we recommend you run an additional Deep clean cycle. In hard water areas you may need to run the Deep clean cycle more frequently. We recommend you use filtered water to always get the best performance from your machine.
Step 3 Make a descaling solution Carry the water tank by its handle to the tap. Remove the cap and evaporator. Fill the water tank halfway to the Max level with cold tap water. Measure out 150g of citric acid and place it in the water tank. MAX level Agitate gently until all the citric acid has dissolved. Place the evaporator in the water tank. Fill the water tank to the Max level with cold tap water. Step 4 Replace the cap Replace the cap and secure the cap clips in place.
Step 7 Rinse Unclip the cap, take the evaporator out of the water tank and rinse under a cold tap. Wipe away any excess water to avoid drips and place the evaporator to one side. Rinse the water tank under a cold tap. Wipe the inside of the tank to remove any excess solution and any debris. MAX level Step 8 Refill Refill the water tank to the Max level and wipe off any excess water and replace the cap, making sure that the cap clips are secured.
Changing your HEPA+Carbon filter The purifying humidifying fan with the filter covers open showing a HEPA plus carbon filter located in the filter covers and a catalytic filter. Arrows demonstrate that the catalytic filter is fitted directly to the base of the machine and the filter covers will need to be assembled onto the base of the machine. Supplied with a HEPA+Carbon filter. To change your HEPA+Carbon filter, push down on the buttons either side of your machine to release the outer cover.
Looking after your machine To always get the best performance from your Dyson purifying fan, it’s important to regularly clean it and check for blockages. Cleaning your machine If your machine is dusty, wipe with a damp lint-free cloth. Look for blockages in the air inlet holes on the filter and the small aperture inside the loop amplifier. Use a soft brush to remove dust and debris. Don’t use detergents or polishes to clean your machine. Alerts Continuous alert icon Switch off and unplug your machine.