Instruction manual

Copyright © 2004-2005 Baby Lock USA
Customer Support: 1-800-313-4110
BLG Ver 2.02 Update – p.1
Software Update for
Baby Lock Ellegante to Version 2.02
September, 2005
Introduction
Version 2.02 update will provide the following changes
Utility stitches
1. Change the initial needle position of a straight stitch to be left or middle position when utility
stitch is selected through page 1 of the machine setting mode key.
2. The initial settings of four utility stitches are changed.
Stitch 1-30, 1-31, 1-32 – Stitch length default setting has been changed from 1.6mm to 2.0mm.
Stitch 1-35 – Stitch length default setting has been changed from 1.2mm to 1.8mm.
Embroidery
1. The optional embroidery frame EF81, 26cm x 16cm (approx. 10-1/4 inches x 6-1/4 inches), can
be used with version 2.02 or higher.
2. Embroidery color order will display the name of color in place of embroidery numbers when
NAME OF COLOR is selected for THREAD COLOR DISPLAY.
3. 300 names of thread colors can be displayed on THREAD COLOR DISPLAY when NAME
OF COLOR is selected.
4. MADEIRA RAYON thread numbers are added to thread brand selection (page 4 of machine
settings) and displayed on the THREAD COLOR DISPLAY.
5. When the last color of an embroidery pattern is sewn, “Finished sewing” will appear on the
display. Press (CLOSE) and the display will return to the original screen.
6. “SELECT” is added on the PATTERN SELECT key
to select the design to be
edited.
7. Jump stitches among embroidery alphabet characters can be trimmed when the thread trimming
function is turned on.
Note:
For better performance, use a ballpoint embroidery needle HA x 130 (size 75/11) embroidering
patterns with short jump stitches such as alphabet characters.