Quick Setup Guide

Connecting your speakers
1 Strip approximately 1/2" of insulation from the ends of
your speaker wire (not provided).
2 Connect the positive wire on your audio equipment to
the red (+) speaker terminal, by pushing the red (+) lever
on the terminal, inserting the wire, then releasing the
lever.
3 Connect the negative wire on your audio equipment to
the black (-) speaker terminal the same way.
See the documentation that came with your amplier or
home theater system for more information on connecting
the cables.
Note: For best performance, speaker wires must be connected
correctly. All two-conductor wire is marked in some way to help with
this. One side will be marked with a colored stripe, raised rib, or
dierent-color conductor. Use the marked side for the “red”
connections. We recommend using 18-gauge or heavier speaker wire.
Congratulations on your purchase of a
high-quality Dynex product. Your 2-Way
Bookshelf Speakers are designed for reliable
and trouble-free performance.
Package contents
• Speakers (2)
• Quick Setup Guide
Positioning your speakers
Left and right speaker outputs are shown on the home
theater amplier speaker connectors. Arrange the
speakers accordingly.
Right
speaker
Left
speaker
Before using your new product, please read these instructions to prevent any damage.
Quick Setup Guide
4" 2-Way Bookshelf Speaker Pair
|
DX-SP115
Amplier/home theater system
Note: Make sure to
connect the + terminal on
the speaker to the
+ terminal on the amplier
and connect the - terminal
on the speaker to the
- terminal on the
amplier.
Back of
amplier
Back of speaker