DYNETICS INCORPORATED GroundAware™ Reconfigurable Surveillance Sensor Installation, Operation, and User’s Manual
G R OU ND A WAR E ™ RE C ONFIG UR A B LE SU R VE ILLA NC E SE NSOR Installation, Operation, and User’s Manual Dynetics, Inc. 1002 Explorer Blvd Huntsville, AL 35806 Phone 256.964.
Version/ Revision Document Change # Release Date 1/3/17 Originator Reason for Change Joel Simoneau and Mike Stokes Initial version of the Installation, Operation, and User’s Manual for the GroundAware RSS
Table of Contents Important Safety Instructions ..................................................... 1 Safe Usage ..................................................................................... 1 General Description and Specifications ..................................... 3 ........................................................................................................ 4 Specifications .................................................................................. 4 Installation ........
1 Section G R O U N D A W A R E Important Safety Instructions W ARNING! Do no remove any part of the product enclosure or create an opening in the produce enclosure in any way. Risk of fatal electrical shock exists with any exposure to the internal product components. Further, any opening of modification of the enclosure by any non-Dynetics personnel voids the product warranty and can only be reinstated by Dynetics in writing.
This device complies with Part 15 of the FCC Rules.
2 Section General Description and Specifications G roundAware™ 360 is a user Reconfigurable Surveillance Sensor that detects, tracks, classifies, and provides actionable information relevant to objects within a 360° field of view up to One kilometers from the sensor.
Figure 2-1 below illustrates how the GroundAware™ system and sub-systems interact and what is typically provided by Dynetics and by the user/reseller. NOTE: Optional integrated cameras and other sensors not shown.
Operational Frequency Antenna Azimuth Coverage Elevation Coverage Average Transmit ERP Range Accuracy Range Resolution Minimum Detectable Velocity Instrumented Range Walker Detection Range Dimensions Weight Power Requirements Data Interface Operating Ambient Temp Storage Ambient Temp Operating/Storage Humidity Operating Altitude Rain Resistance Hail Resistance Ice Resistance Solar Radiation Exposure Sand/Dust Resistance Maximum Sustained Winds & Gusts Browser Compatibility User Defined Parameters S Band: D
Electrical installation includes connecting the unit to a maximum 35 Watt, 24 VDC, POE injector grounded alternating current source using a shielded ethernet cable. Optionally, the unit may be powered through the switch in the interface sub-system as described previously. Any additional switches utilized in the provision of power to the system (e.g. installed by the customer) should be rated for the type and quality of power specified.
3 Section Operation T his section assumes that the precautions and setup steps of the previous two sections have been read, understood, and followed. If any of the material or steps from sections 1 and 2 have been skipped or poorly understood, please pause and review the information and re-perform whatever steps may be necessary to ensure that GroundAware™ is properly and safely installed, powered, and connected before the activities of this section are performed.
website. Dynetics will provide training as necessary to allow operators to monitor the system using this interface and configure alarm zones to their preferences.
