2
Table of Contents Before using product...................................................................................................................................5 Accessories...................................................................................................................................................6 PC System Requirement.............................................................................................................................7 Features ........................
Before using product Accessories Carefully read this part before using the product. The manufacturer is not responsible for any damage or loss from being not in conformity with these precautions. Tuny9 Pay attention not to get wet with water or chemicals. In that case, contact our A/S agent for repair. Never use any chemical or cleanser. It may damage the surface of product. Avoid humidity, dusty area and magnetic body. Earphone Pay attention not to get wet with water or chemicals.
PC System Requirement Minimum PC System CPU : Pentium 500 MHz or more OS : Windows 98 se, Windows Me, Windows 2000, Windows XP VGA : SVGA color monitor or more RAM : 128MB or more recommended HDD : More than 30MB Space in hard disk CD-ROM Driver USB port System requirement for Transcoder CPU : Pentium4 1GHz or more OS : Windows 2000, Windows XP Windows Media Player 9.0 DirectX 9.
Location of Controls 9 10
Power On / Off / Hold T e rm s Power On MTP (Media Transfer Protocol) Press to turn on the power 1 sec or so. Press to turn off the power 3 sec or so. MTP is a new protocol and accompanying set of drivers developed by Microsoft to connect portable devices to a Windows XP PC and synchronize digital media content between those devices and the PC. MTP is geared toward portable devices with hard drives.
Battery Safety Precaution for Battery Battery Recharge This unit has a built-in Lithium Polymer Battery (680 mA, 3.7 V). Carefully read this part before using the product. Connect the unit into PC with USB cable supplied in the package to charge. (Recharge is in process while connecting unit into PC and LCD will show the picture on the right when completion of recharge.) Put and charge in an isolated area, away from other flammable materials. Do not turn on the power when drowning.
Windows 98 SE Connection with PC Connect one end of the cable into a USB port and the other end to the USB port ( the unit. ) of The product can not be identified in the PC with Windows 98SE or lower. Install program CD supplied with product in the PC. Please set up the driver as following procedure. 1. Select the driver install when installation screen appears on after inserting the CD (including Win98 driver) supplied with product. 2. Start the rebooting after appearing on “Complete” 3.
Checking of Connection PC identifies the product as a removable disk under “My Computer” the name of “Express” It can also check the connection through a controller as follows. Save and Delete the media file (with MSC) Please find the Express drive(removable disk) from the file viewer. The name of drive varies according to computer. Select the file to be copyed. click the right button on mouse and select the “copy.
Media file Synchronize (MTP) MTP requirements Windows XP SP2 Windows Media Player (Ver. 10). 1. 2. 3. 19 4. Click on “Synchronize Start” to copy Media files after choosing the files. 5. It will be automatically lined up in alphabetical order according to Artist, Album and so on after Synchronizing. 6. The files which was Synchronized via MTP cannot copy or transfer. It available to elimination only. ※ For more information, press the F1 key in the Windows Media Player.
Format Disconnection (below Win 2000) All the files saved in the player will be deleted during formatting. You must backup the data before formatting. There are three ways to format. In case of MSC, removing the cable without following instruction may cause the fatal error in PC or the product. 1. Double click on the green arrow on the right-bottom part of initial Window screen like a below picture. 2. 3.
Firmware / Font Update Updated File Download Download the updated files through our website (http://www.dynetel.com – Support – Download). It provide with compressed files. After downloading, extract the files and check both TUNY9IMA.TBL, TUNY9MSG.TBL, TUNY9FNT.TCC and TUNY9.ROM. How to Update 1. 2. 3. 4. 5. 6. 7. Connecting the product into the PC by USB Cable. Copy the downloaded files. Go into the removable disk. Attach the files. A. In case of MTP, copy the files into ‘Data’ folder. B.
Modes Select MTP/MSC This unit is consisted of 6 modes. Mode will go through Music, Radio, Multimedia, Picture, Browse and Setting. For instance, playing music file is only in Music mode. Also it needs to change to Multimedia mode to play the movie. To change mode, button long and select the mode by using the button. press the 1. Press the [ MSC. ] button to select the MTP or Navigation Mode 1. Press the button each mode (except for Radio mode) to move the navigation mode.
Playing Music Files 1. Press the button long to move the conversion screen then select the Music mode and button again. press the 2. Press the button to play after appearing the Music mode screen. Move Previous or Next Song 1. Press the / button to move previous or next song while in playback. Press the button to go into the head of the song when song playing exceeded the time of 10 sec. Fast Forward / Fast Rewind 1. Press the / button shortly to move previous or move next song while in playback.
Listening to Radio Manual Preset and Preset Mode change 1. Press the button long to go to the selection mode. Then select the Radio Mode and button again press the 2. The earphone takes the role as an antenna. Manual Preset button to change the Preset 1. Press the Mode. It cannot be changed if there is no fixed preset. 2. In preset mode, preset No. will be displayed and in manual mode, “Off” will be displayed instead of preset No. Saving FM Channels 1.
Auto Preset button to scan and save the 1. Press the frequencies automatically. button to cancel the scanning 2. Press the while scanning. Using Preset 1. Press the button to change the Preset Mode. Preset Mode shows the Preset No. / 2. Select the preset No by using the button. Select Stereo/Mono 1. Press the Mono. button to select the Strero or FM Recording 1. After selecting the broadcasting what you want to recording, press the button long to start the recording. button to stop the recording 2.
Playback Moving Picture Move Previous / Next Moving Picture 1. Press the button long to go into the button again Multimedia Mode and press the to select. 2. When appearing the moving picture mode, press button to play after selecting the file. the 1. Press the / button shortly to play the previous / Next Moving Picture. button to go into the head of 2. Press the the movie when song playing exceeded the time of 10 sec. Fast forward / Fast Rewind 1.
Recording Type of Recording 1. Press the button long to move the button conversion screen then press the again after selecting the Record mode. Press the button long. 1. Press the 2. Press the If you start the recording in FM Radio button to start the recording. button to finish the recording. Start the FM Radio Recording If connecting the Cable into Line-in port Start the LINE-IN Recording Pause 1. Press the 2. Press the when pausing. button to pause the recording.
Viewing Image Viewing Text 1. Press the button long to move the button conversion screen then press the again after selecting the picture mode. 1. Press the button long to move the button conversion screen then press the again after selecting Text mode. 2. When appearing the Image mode, press the button to play after selecting the file. button to play after selecting the 2. Press the file what you want. Viewing previous / next image 1.
Using Browse Add the Favorite 1. Press the button long to go to the button again to selection Mode and press the move the Browse Mode. 2. Various Line-ups will appear on LCD as follows. Set the standard of Line-up and press the button. Select All Artist Album Track Favorites New Musics Genre Years Playlist Audibles Recorded Picture Text Movies Folder 1. Line up by folder in navigation mode. button in the lists to add the 2. Press the Favorite after selecting the file.
Connection of USB Host 1. Connect the product to the portable device (Cellular phone, Digital Camera, MP3 Player and so on through USB host cable. 2. “File System UFD Mount Success!” message will be appearing on if it is recognized successfully. 3. It can be copied the files from the other devices after disappearing the pop up window. ※ Note Make sure that portable devices must be turned on before connecting.
Using Bluetooth 1. Prepare for the Bluetooth headset with stand by mode then go to the next step. button long to move the 2. Press the selection screen then select the Bluetooth. 3. Select “ON” in the menu. 4. Select “ Search” to seek the Bluetooth products which can be supported. Note: Before searching, headset must be OFF then press the power button 7sec or so to go to standby mode. 4.
Connection with TV 1. Connect TV with Cable provided. button long to move the 2. Press the menu then select the TV. 3. Select the “ON” on the menu to output through the TV. 4. Set the Country, Screen Size, Resolution and so on to output properly. Note - After connecting TV with Cable, check the input terminal. If it is setting with other mode, it cannot be displayed. - Check the country setting. It may not be working properly cause by difference of output power per each country if it is selected wrong.
Menu Setting General Setting 1. Press the button to go to the selection mode and press the button again to move the Menu Setting Mode. There are 9 Setting Mode as follows.
Mode Setting Television Setting Playback Repeat : Repeat the chosen files or directory. USB Mode : Set the USB connection mode. Sound Setting Mode : Adjust the output to TV. Country : Adjust the output type according to the countries. Screen Size : Adjust the screen size. Quality : Set up the screen quality. Information : Display the information of total memory capacity, available memory and software version. Format : Format the player.
Using Transcoder 3. Click on “Option” button to adjust the volume, caption, brightness and so on at need. 1. Execute the CD supplied then select the Transcoder when installation screen apprears on. 4. Click on “Converter” or “Option” button to start the Converting. Then progress screen will be appreared on and then screen will be back to the first page after completion. ※ Note It can support the AVI, MPG, MPEG, DAT only. MPEG-2 and VBR format cannot be converted.
FAQ Followings may not be troubles, please carefully exmine symptoms. Q A Trouble with moving picture playback. 1. Check if a file is damaged in the PC. 2. It is a wrong file if it couldn’t run in the PC 3. Check the frame size which is converted. 4. If exeeding 128x112, it cannot play. Q A Trouble with Transcoding. Transcoding. 1. Re-install the Transcoder. 2. Install the latest Codec after eliminating the previous Codec in the PC. 3. Check the PC Syetem Requirement. 4.
Frame per Sec 10 FPS Specification Audio General Status Size(W x H x D) 45 x 82 x 14 mm Weight 51 g Product Type Plug & Play (Removable disk) LCD 2.0” 260K Color TFT LCD (176x220 pixel) USB USB 2.
Important Notice Check the specificaton before buying. The maunfacturer is not responsible for refund or returned goods if you change your mind after buying. Before proceeding with After Sales Service. Please read carefully and understand the following contents. It may claims for the payment even if within the terms of guarantee.
- Additional Page - G Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received. Including interference that may cause undesired operation.
