User's Manual

D52Q ANT Module
Part of the D52 Module Series from Dynastream Innovations
ANT® Operation (using the latest s212 or s332 SoftDevice)
 79 selectable RF channels (2402 to 2480 MHz)
(preliminary)
 Flexible network topologies: peer-to-peer, star, tree,
high node count, mesh and more
 Broadcast, acknowledged, and burst data
communication modes
 Built-in device search and pairing
 Built-in interference handling and radio coexistence
management with application radio disable requests
and application flash write/erase requests
 Enhanced ANT features:
o Supports up to 15 logical channels each with
configurable channel periods (5.2ms - 2s)
o Advanced burst data transfer modes (up to
60kbps)
o Optional channel encryption mode (aes-128)
o Supports up to 8 public, private and/or managed
networks
o Advanced power management features to
optimize application power consumption including
Event Filtering and Selective Data Updates
o Asynchronous transmit channel
o Fast channel initiation
ANT/Bluetooth® Smart operation (when loaded with the
latest s3XX soft-device)
 ANT operation functions as S212
 Bluetooth 4.2 compliant low energy single-mode
protocol stack suitable for Bluetooth Smart products
o Concurrent Central, Observer, Peripheral, and
Broadcaster roles with up to:
 Multiple connections as a central
 One connection as a peripheral
 Observer
 Broadcaster
o Link layer
o L2CAP, ATT, and SM protocols
o GATT and GAP APIs
o GATT Client and Server
[future: module picture]
Module Hardware
 20 x 20 x 2.7mm module using the nRF52832 chip from
Nordic Semiconductor in two SKUs:
o D52QD2M4IA – Module
o D52QD2M4IA-A – Module + accelerometer
o Layout compatible with N5 M4, AP2, C7
o Additional LGA pads for extended nRF52 features
 Integrated printed antenna
 On-board 32.768 kHz and 32 MHz crystal clocks
 Supply Voltage range:
o 1.7V to 3.6V
o 1.71V to 3.6V when using accelerometer
 Internal DC/DC converter supported
 Operating temperature: Industrial (-40°C to +85°C)
 29 GPIOs
o 23 GPIOs for accelerometer SKU
 Programmable output per channel from -20dBm up to
4dBm
 Excellent receiver sensitivity
o –92.5dBm ANT mode
o –96.5dBm BLE mode
 1dBm resolution RSSI
 Total 512kB flash, 64kB RAM
 SPI, I2C and UART interface
 ARM SWD interface
 Available onboard ST LIS2DH accelerometer
o 3-axis MEMS accelerometer
o 2 programmable interrupt pins
 Radio regulatory approval for major markets
(engineering samples are provided pre-certification)
 BLUETOOTH SIG qualification
 RoHS compliant
D00001675 D52Q ANT Module OEM/Integrators Installation Manual / Data sheet Rev 0.4