User's Manual

User Manual
Please follow the steps as below:
1. Plug the receiver into PC USB port before using, the red indicator
shines means the connection between PC and receiver is OK.
2. Load the batteries to the mouse and click on the power switch then
the optical LED will be lightened.
3. Click the mouse ID setting button, its optical LED will be
darkened and the low power indicator (red color) will shine for once.
4. Click the receiver ID setting button, it will shine red slowly.
5. After ID setting of the mouse and receiver is finished, the red
indicator of receiver will be quickly shining and then stop shining
which shows that the connection between mouse and receiver is OK.
6. The red indicator of the receiver will shine while moving the
mouse, and stop shining if mouse not moving.
7. When the batteries carry low power (1.0V～1.1V), the red low
power indicator of the mouse will shine to remind users to change
batteries.
8. After 8 minutes of not moving the mouse, its optical LED will be
darkened (in sleep mode).
9. Users should click the mouse buttons or scroll if tend to wake it up
from the sleep mode.