User's Manual

ManualsBrandsDynaPoint ManualsComputers & AccessoriesMOUSE

H39 manual

1. Product description:

1.1 This mouse sets with 800dpi resolution.

1.2 Ergonomics design offers comfortable use for both left and right hand users.

1.3 Streamline appearance design, not novel but fashionable in design.

1.4 Capacity: 8M, Supports bmp and jpg format.

1.5 Display function could be adjusted automatically and manually.

1.6 USB interface, plug and play.

1.7 Compatible with windows95、windows98、windows2000、windows XP、Vista and

windows 7.

1.8 This mouse includes three keys—left, right and middle, plus 3D and scroll function.

1.9 1.5 Inch TFT color LCD.

2. Installation:

2.1 Plug the mouse into PC USB port directly, plug and play, no need to install other drivers.

3. Display manual:

3.1 Appearance and key function（ picture as below） :

3.2 Buttons.

1. Menu: Press and hold to power on and off.

2. Up: Go back to the previous item/picture.

3. Down: Go to the next item/picture.

4. Reset: To restart the unit when it has been stopped or connect with computer error.

Reset

DOWN

USB cable

Summary of content (9 pages)

PAGE 1
H39 manual 1. Product description: 1.1 This mouse sets with 800dpi resolution. 1.2 Ergonomics design offers comfortable use for both left and right hand users. 1.3 Streamline appearance design, not novel but fashionable in design. 1.4 Capacity: 8M, Supports bmp and jpg format. 1.5 Display function could be adjusted automatically and manually. 1.6 USB interface, plug and play. 1.7 Compatible with windows95、windows98、windows2000、windows XP、Vista and windows 7. 1.
PAGE 2
3.3 Menu Introduction: A. Press Menu button to access the Menu: Use “Up/Down” buttons to navigate then press Menu button to access the selected item. Main Menu USB Connect Slide Show Auto off Backlight Contrast Delete Power Off Exit -The menu including：USB connect, Slide Show, Clock, Auto off, Backlight, Contrast, Delete, Power off and Exit. Note: Hold Menu button for 2 seconds. The unit will power off. It is not acceptable power off in the main menu interface. B.
PAGE 3
-Press “On”, then press “up” button or “down” button to adjust time for Auto off, (the time arrange is 00-30 minutes), show as blow. - Select “off”, press Menu button to exit the setting and back to “Menu”. - Select “Cancel”, press Menu button to exit the setting and back to “Menu”. F. Backlight Adjusting: -Select “Backlight” and press Menu button to enter. -Adjust the setting by using “Up/Down” buttons (the brightness arrange is 0-21). G.
PAGE 4
. Picture File Conversion: -Connect the unit to the computer with the USB cable. - Select “Connect” then press Menu button. -Select “No” and press Menu button to exit. -Select “Yes” and press Menu button to enter “connect” mode. -The computer will open a window of the tool. -Select the picture file need to be converted. Green means the unit was connected with computer. Red means the unit was disconnected with computer. ，，：Zoom in/out the picture for selected the picture. ：Rotates the picture.
PAGE 5
：Save all pictures in the unit to computer. ： Exit. -After the whole pictures are converted, click “ the unit. ” button to transfer the pictures to -Press the reset button and turn back the normal display mode after loading completely. 5. Display setting: -Click “setting” can change the front color and the background color of the menu. to select the font color. to select the background color.
PAGE 6
. Auto-play setup for computer system 6.1 Windows 7 system setup： Enter “Control table‐‐‐‐Hardware and voice effect‐‐‐‐Auto‐play” option, then choose “Install or run program from your media” in the sub‐option of “Software and game”，see the red mark in the image as below: Software and game 6.
PAGE 7
6.3 The issue below Window XP system： 6.3.1．Click “Start”, choose and enter “Run”, see below image: 6.3.2. Input “gpedit.msc ” in the Run blank column and click “OK”, see below image. 6.3.3.
PAGE 8
6.3 4.
PAGE 9
FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.