User's Manual

User Manual
1. Plug the receiver into PC USB port before using, the LEDindicator
shines means the connection between PC and receiver is OK.
2. Load the batteries to the mouse and click on the power switch then the
optical LED will be lightened.
3. Click the mouse ID setting button, the LEDindicator shines and the low
power indicator will shine for once.
4. After ID setting of the mouse and receiver is finished, the LED indicator
of receiver will be quickly shining and then stop shining which shows
that the connection between mouse and receiver is OK.
5. TheLED indicator of the receiver will shine while moving the mouse,
and stop shining if mouse not moving.
6. When the batteries carry low power (1.8V～2.1V), the LED low power
indicator of the mouse will shine to remind users to change batteries.
7. After 8 minutes of not moving the mouse, its optical LED will be
darkened (in sleep mode).
8. Users should click the mouse buttons or scroll if tend to wake it up from
the sleep mode.