DynaPredict Solution Quick Start Guide Dynalogger Bluetooth Low Energy (BLE)
Table of Contents 1 Introduction _______________________________________ 05 2 Operation _________________________________________ 06 3 Position and attachment _________________________ 07 4 App ________________________________________________ 5 Web Platform _____________________________________ 6 Gateway ___________________________________________ 08 10 11 02
Frequency range: 2.400,0 MHz to 2.483,5 MHz Max RF output power: <20 dBm Hereby, Dynamox Solucoes Criativas Ltda. declares that the radio equipment type DynaPredict is in compliance with Directive 2014/53/EU. FCC ID 2AT3M010202 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EU DECLARATION OF CONFORMITY Radio Equipment Product: Type: Batch/serial number: Manufacturer Name: Adress: Country: Data Logger DynaPredict TcA Dynamox Rod. SC-401, KM 01 Parque Tecnológico Alfa, Ed. Celta Florianópolis - SC Brasil This declaration of conformity is issued under the sole responsibility of the manufacturer: Object of the declaration: Bluetooth data logger designed to monitor machine health by collecting temperature and vibration.
1. Introduction The DynaPredict solution is composed of: •Dynalogger , a data logger designed to monitor machine health by collecting temperature and vibration. • DynaPredcit App, an application developed for Android® and iOS, whose function is to interact with Dynaloggers via Bluetooth. •Web Platform, online platform with data history and diagnostic tools for data analysis.
2. Operation The flowchart in Figure 2 provides a summary of how the solution works. Mesauring Points Definition Positioning and attachment App Monitoring Point Configuration App Gateway Data Acquisition Automated Data Acquisition Automated Spectral Analysis Spectral Analysis Request Web Upload Data Analysis Figure 2 - Solution Operation Manual de Uso Seguro para a solução Dynapredict (Ex.) - versão 1.
3. Position and attachment The Dynaloggers must be positioned on the machine or equipment to be monitored. It is important to position the device on exposed parts of the machine and it is recommended to avoid installation in regions of the housing that have localized resonance. In addition, Dynaloggers must be positioned on a non-rotating part of the machine. Since Dynaloggers take readings on three orthogonal axes, they can be installed in any angular direction.
In terms of attachment, the device can be: • Epoxy glued: ideal for machines whose housing cannot be drilled; • Screwed: Dynaloggers have a hole precisely for this type of attachment as shown in Figure 4. Each device goes with a screw and a spring washer. Screw ISO 7980 M6x1 Spring Washer Figure 4 - Screwed Dynalogger Note that different locations generate different measurements. So in order to obtain a reliable data history, it is recommended to keep Dynaloggers always installed in the same location.
4. App In order to configure the devices, get instant readings of vibration and temperature, collect data and request spectral analysis, users must download DynaPredict App. This can be easily done by searching for “dynapredict” in the Google Play store and installing the app. On the initial screen, shown in Figure 5, login credentials will be requested. If you do not have credentials yet, please contact Dynamox.
5. Web Platform In order to access data history, fault diagnosis tools and many other features, users can access DynaPredict Web Platform (https://dyp.dynamox.solutions). The same credentials will be requested (Figure 6). Figure 6 - Web Platform Login To learn more about the Web Platform and its features, please read the "DynaPredict Web Platform" manual. Manual de Uso Seguro para a solução Dynapredict (Ex.) - versão 1.
6. Gateway It is an alternative to the App for collecting data stored in Dynaloggers. Gateways are able to automatically collect data from Dynaloggers within their Bluetooth range and send it directly to the Web Platform, in addition to allowing spectral analysis scheduling. To learn more about how it works, please read the “Gateway” manual. Manual de Uso Seguro para a solução Dynapredict (Ex.) - versão 1.
Dynamox – Exception Management Parque Tecnológico Alfa – Edifício CELTA Rodovia José Carlos Daux, KM 01 CEP: 88030-902 Florianópolis / Santa Catarina - Brasil +55 (48) 3024-5858 support@dynamox.