Intelligent Three-Proof Mobile Phone Quick Guide gravity 4.
Safety Matters and Environmental Protection If you are going to make or answer a phone call while driving, please use earphones or park your car properly before using your mobile phone. Please turn off the device near medical devices or medical locations that are marked “no wireless devices”. Please turn off the mobile phone Waste battery should be put into on the plane, and confirm the cancellation of the alarm clock or auto power-on setting, so as to avoid auto power-on.
professional necessary. services for maintenance if In the case of an emergency, you Your device is a radio transmitter may use the mobile phone to call 112 directly to seek service from your local phone network. and receiver. Its design complies with the radio wave radiation limit suggested by the international standard (ICNRP).
3. Receiver 4. Front Camera 5. Return to Main Interface 6. Option Key 7. Dial Key 8. Custom Key 9. Distance/Light Sensor 10. Touch Screen 11. Return Key 12. Hang-up Key 13. Long Press to Initiate Photo Mode 14. Long Press to Initiate SOS Mode 15. Volume + 16. Volume - 17. Loudspeaker 18. Flash/Alternate to Flashlight 19. Rear Camera 20. Screw lock 21. Battery Cover 1.2 Installation and Removal of SIM Card/Micro SD-Card/Battery Charge 1.
3. First match the lower part of the battery with the mobile phone metal part in the direction of Arrow 1 and then press the battery into the battery slot in the direction of Arrow 2. 4. Close and lock the rear cover.
Turn the screw lock to the right on the battery cover till it locks. 5. Charge.
6. Use the shortcut key to turn the power display on and off and press on the power key to turn the mobile phone on/off. Press on the power key. Please make sure that the battery cover, the lock catch of the battery cover, the screw hole rubber plug, the earphones and USB rubber plug port of the mobile phone are properly sealed, only then can the mobile phone be water-proof and dust-proof. This point will not be covered again.
Weight 316 g Chip MTK6582 Quad-core (1.3GHz) Default memory capacity of mobile phone ROM :8GB RAM : 1GB Maximum memory capacity of Micro-SD Card: 32G Display screen 4.02'(FWVGA ) Resolution ratio: 480x854 Dual SIM Dual Standby Dual SIM Dual Standby Network type WCDMA/GPRS/EDGE/WAP Battery capacity 2800mAh Talk time GSM:12H WCDMA :7.
Water-proof tail plug: after sealing the tail plug, please check again whether it is firmly locked, to ensure perfect water-proof function. • Preparation before entering water 1. Close the battery cover properly before the mobile phone enters the water (for details, please refer to “Installation Methods of Battery Rear Cover”) 2. Before closing the battery rear cover, please make sure there are no hairs or sand or other objects on the flexible glue around the rear cover that affect the tightness of closing.
•Press on the power key and then touch mute or vibration lightly. 2.4 Power on and off To power on, press on the power key. To power off, press on the power key and then select power off →enter. Note: In areas in which it is prohibited to use wireless devices (such as on a plane and in a hospital), please abide by all posted warnings and instructions. To use only non-network function of the device switch to airplane mode. Use of Touch Screen 3.
matched.) Wi-Fi Wi-Fi is a wireless networking technology that can provide Internet access at distances of up to 100 meters, depending on the Wi-Fi router and your surroundings. Touch Settings > Wi-Fi. Check Wi-Fi to turn it on. The phone scans for available Wi-Fi networks and displays the names of those it finds. Secured networks are indicated with a Lock icon. Note: If the phone finds a network that you connected to previously, it connects to it. Touch a network to connect to it.
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.