Content Content .............................................................................................................................................. 1 1 Introduction .................................................................................................................................... 3 1.1 Acknowledgement ............................................................................................................... 3 1.2 Announcements .................................................
5.3 Photo Gallery .................................................................................................................... 47 5.4 Camera .............................................................................................................................. 48 5.5 FM Radio .......................................................................................................................... 49 6 Communication Function .....................................................................
1 Introduction 1.1 Acknowledgement Thanks for your purchase of our product. This is 7’’ high definition tablet PC. Its CPU is MT8735, which apply 4*Cortex-A53, dominant frequency is 1.3GHz; it is based on Android 4.1 operation system, and easy to expand the third application procedure. The product is designed with various functions, including 2G/3G/4G, WIFI, BT, GPS, FM, voice call and so on.
z In the medical area, please abide by related rules and regulations. Please shut down the MID when it is near to the medical area. z To avoid the wireless signal to interrupt the plane- controlled signal, please shut down the MID or using airplane mode when you are boarding a flight, z To avoid electronic equipment failure, please shut down the MID in the vicinage of high-accuracy electronic equipments. z Please don’t disassemble the MID and accessories.
2 MID Introduction 2.1 MID Operation and Preparation Battery Charging Please fully charge it before firstly use the MID. 1. Apply the power adptor to charge for MID. 2. Red LED twinkle indicates power is less than 10%, red LED indicates power is being charged. Please wait until it is fully charged and don’t pull out the adaptor while charging. When it is fully-charged, the LED will turn to Green. 2.
Reminder icons will work while receiving emails, WIFI is open, you can open the reminder board to view the detailed information. Open the reminder board When the reminder column shows new reminder icon, please hold the column and slip down your finger, then the reminder board is opened. 3 Quick Start Guide 3.1 Keys Function Keys Funcction Description： Power button Short press to sleep/wake up, long press to startup and shutdown.
3.3 Open and Close of the Screen Screen will be closed on its own when no operation happens. 1. Screen will be closed on its own if no operation happens for some time to save battery power 2. When screen is open, press POWER key, the screen will be closed immediately. Open the screen when it is closed. If the screen is closed, short press POWER key to open the screen. The screen will be locked open it, it will show the picture as below picture 3.
Pull Before you pull, you need to hold the it with strenghth until you pull it into the position you want. Rotate For most pictures, you only need to retate the MID sidewise to change the screen direction from horizoncial to vertical. For instance, when you are typing wods, and watching movies. 3.5 Home Page Main interface as below picture 3.2, long press the blank and it will popup windows to set wallpaper, folder, widgets, and shortcut.
Picture 3.3 Shortcut icon management Create folder icon in desktop 1. Drag the icons need to be put together on one icon(can also overlay several icons)as Picture 3.4. 2. Then click the overlayed icons, the applications can be folded, as Picture 3.5. Click the unnamed folder in the black box, it will popup the hidden keyboard, the folder name can be renamed (this is similiar with Apple IOS system), the icons position can be changed through long press.
Picture 3.4 Picture 3.5 Remove the icons in desktop 1. Long press the icons need to be remove, then on the right above of the screen, it will appear icons. 2. Drag the icon to the above of the remove icon, till the icon become red, then move your finger to delete the icon. Change the wallpaper of desktop 1. In home page, long press any blank space in main screen, it will popup a window to change the wallpaper. 2. Click the gallery or wallpaper gallery to select the wallpaper. Voice search 1.
3.6 Visit Application Procedures Click button in the right top of Picture 3.2, enter into main interface as Picture 3.6, choose the application procedure you want to visit. Return to main interface Picture 3.6 3.7 USB Connection MID storage configuration Before transmitting documents, you have to conduct storage configuration for your MID: 1. Connect the MID and computer by USB cable, the reminder column will show the remind information. 2. Open the reminder board; please view Chapter 2.
Picture 3.7 Copy the document into memory card 1. Connect the MID to computer with USB cable. 2. As MID storage configuration, it is connected with computer successfully. 3. Open the “My computer” in your computer, check the items in “removable disc”. 4. Copy the documents you need into “removable disc”. 5. After copying finishes, click “shutdown the USB storage configuration” to uninstall.
1 switch the capital and small letter 2 switch the mode of words input 3 click to insert the space 4 click input to execute 5 delete the character in the left of cursor, click and hold to delete all the characters in the left og the cursor. 3.9 Operation Technique Enter widgets interface In the application interface,click widgets on the above of screen, or slide the screen, it will swtich into widgets interface.
Picture 4.1 2. Add Network 1. Click right top icon in Picture 4.1, as Picture 4.2 Picture 4.2 2. Input network SSID, the wireless network name, click save. 3. Click the created and saved user name, choose connection, to fulfill network normal use, as Picture 4.
Picture 4.3 3. Network Notice 1. Click icon in right top of Picture 4.3, choose Advanced. 2. Click network notice, when wifi signal appear, the right bottom shows available WLAN network. 4. Keep Wifi on during sleep 1. Click icon in right top of Picture 4.3, click Advanced. 2. Click Keep wifi on during sleep, choose the condition keep WLAN connection. As Picture 4.4 Picture 4.
4.2 Bluetooth Bluetooth function operation 1. Click setting application in main menu interface 2. Click bluetooth and open it. 3. Click search device in right above, then MID will automatically search the bluetooth device nearby. As picture 4.5 Picture 4.5 4. Click search to get Bluetooth device, it will popup match request window, enter into correct password, and your friend allows your request. It will match successfully. 5.
Picture 4.6 Bluetooth setting 1. Rename Tablet Click icon in right top of Picture 4.5, as Picture 4.7, Choose rename tablet, you can rename your Bluetooth name Picture 4.7 2. Visibility timeout Click visibility timeout in Picture 4.7, choose the time you want to set, as Picture 4.8 (Remark: visibility timeout setting is the time when Bluetooth can be detected.
Picture 4.8 3. Display the received files Click display the received file in Picture 4.7, you can view the download and uploaded files. 4. Bluetooth advanced setting Click Bluetooth advanced setting in Picture 4.7, enter into Picture 4.9 Picture 4.9 1. File transmission service Open file transmission service, support Bluetooth FTP to connect, fulfill the file visit and operation. 2.
4.3 Data Usage View SIM card data usage, as Picture 4.10 Picture 4.10 View wifi data usage Click icon in right top of Picture 4.10, click Show Wi-Fi usage as Picture 4.11 Picture 4.
4.4 More… 4.4-1 Airplane mode Airplane mode can quickly turn off WIFI and GSM card function, when you open airplane mode, WIFI and GSM can’t read any signal, machine will resume to previous state when you close airplane mode. 4.4-2 VPN Open VPN, click add VPN profile, as Picture 4.12, input name and server address, then save. Picture 4.12 Click created VPN, as Picture 4.13, input the VPN user name and password, click connect Picture 4.
4.4-3 Tethering and portable hotspot Portable WLAN hotspot 1. Click setting application in main menu. 2. Click more… when wifi is ensured, open tethering and portable hotspot Picture 4.14 Picture 4.15 3. Click Keep Wi-Fi hotspot on, choose the open time. 4. Click Return key, open portable WLAN hotspot, click setting WLAN hotspot.
Picture 4.16 5. Set the password you want, and the password length should be more than 8 numbers or letters. 4.4-4 Mobile Network 1. Data connection After opening data connection, you can visit 2G internet via SIM card. 2. Preferred network You can change different network environment as your preference. 3. Access Point Names (APN) Click mobile network, as Picture 4.17 Picture 4.
Choose related connection method, as Picture 4.18 Picture 4.18 4. Network operator Click network operator, choose available mode, you can select manually or choose automatically, as Picture 4.19 Picture 4.19 4.5 Contextual mode 1. Open setting, click contextual mode, as Picture 4.
2. Picture 4.20 Click General to enter into Picture 4.21 Picture 4.21 1. Vibrate In Picture 4.21, click vibrate, MID will remind you have incoming calls by vibrating. 2. Volume In Picture 4.21, click volume, you can adjust rings, notice and alarm volume, as Picture 4.
Picture 4.22 3. Voice call ringtone In Picture 4.21, click voice call ringtones to choose incoming calls ringtone, as Picture 4.23 Picture 4.23 (Remark: Except general, silent, meeting, outdoor for you option, can’t be set and adjusted.) 4.6 Display 4.6-1 Adjust the screen brightness 1. Click Setting application procedure.
2. click display, choose brightness. 3. Popup the brightness setting board, drag the portlito to adjust the brightness volume. As Picture 4.24 Picture 4.24 4. Click OK after adjusting brightness. 4.6-2 Scene 1. Click Setting application procedure. 2. Click Display,click scene. 3. System will appear different scenes for your selection, as Picture 4.
Picture 4.25 4.6-3 Wallpaper 1. Click setting application. 2. Click display, click wallpaper 3. You can choose different wallpaper as your perference---dynamic wallpaper---gallary—wallpaper (system default )—video wallpaper, as Picture 4.
Picture 4.26 4.6-4 Theme 1. Click setting application. 2. click display, click theme, you have four styles to choose, as Picture 4.27 Picture 4.27 4.6-5 Sleep 1. Click setting application. 2. Click display, 3. Click “sleep”.
4. Popup screen standby time setting, choose the standby time you want to set, as Picture 4.28 Picture 4.28 4.6-6 Font size Click font size to ajust font size, as Picture 4.29 Picture 4.29 4.7 Storage Open setting application, choose storage, and choose default storage.
1. 2. Enter into setting application. Click storage, view storage space. 1. Internal storage (1) System storage System storage is available space left for system files, as Picture 4.30, it can’t be viewed. Picture 4.30 (2) Internal storage Internal storage is MID NAND storage, as Picture 4.31, you can choose file to view in main interface. Picture 4.31 2.
You can view SD card storage, SD card available space, SD card format, as Picture 4.32 Picture 4.32 Safely remove SD card 1. Click Setting application procedure. 2. Click Storage. 3. Click Remove SD card. 4. Now it is safe to remove SD card. Remark: Safely remove SD card to protect SD card, increase SD card lifetime. 4.8 Battery Click setting function, choose battery, you can view battery usage situation, as Picture 4.
Picture 4.33 4.9 Application 1. Choose Setting procedure in the application procedure list. 2. Choose application, after entering, you can manage and delete installed applications. （as Picture 4.34） Picture 4.34 3. Left slide to view available space and used space of internal storage, as Picture 4.
Picture 4.35 4. Left slide to view the using application, used space and available space, as Picture 4.36 Picture 4.36 4.10 Location Access Click setting application, choose location access, as Picture 4.
Picture 4.37 1. WLAN and mobile network location Let apps use Google’s location service to estimate your location faster. 2. GPS satellite Let apps use GPS on your tablet to pinpoint your location. 3. GPS EPO Assistance Use GPS assistance data (EPO) to speed up GPS positioning. 4. EPO setting Click to modify EPO configuration, as Picture 4.38, you can view EPO positioning information and EPO is automatically downloading.
Picture 4.38 5. A-GPS Open A-GPS to speed up fixed time. 6. A-GPS setting Click A-GPS setting, enter into Picture 4.39 Picture 4.39 1. Turn off after restart Click turn off after reboot, when you restart MID, A-GPS will auto turned off.
2. Network request Click network request to request your position. 3. Network used Open network used to choose network, as Picture 4.40 Picture 4.40 4. Server Click server to switch server location, as Picture 4.41 Picture 4.41 7.
Open location and allow google search to use your location to improve search result and other service. 4.11 Safety Setting Set locked screen Lock the touch screen by unlock icon or password to protect your MID. Note: You should enter the passcode after setting screen locked. Set unlocked picture 1. Click setting application in main interface. 2. Click safe. 3. Click locked the screen. 4. Choose picture in text setting area. 5. Click next following the remind message. 6.
2. Click safe. 3. Click screen locked. 4. Choose PIN when popup text setting appear. 5. Input new PIN code (numbers) and click continue. 6. Input new PIN code again and click OK. Set unlock PIN code 1. Click setting application in main interface. 2. Click safe. 3. Click screen lock. 4. Choose password in text area. 5. Set new password(numbers/letters) and click continue. 6. Enter into new password and click confirm. Unkonwn source 1. Click setting appliaction in main interface. 2.
4.12 Language and Input Method Click setting, choose language and input method, choose language to switch language type, as Picture 4.44 Picture 4.44 Click setting, choose language and input method, choose Android keyboard, choose input language, close use system language, as Picture 4.45 Picture 4.45 Choose the language you want to change in active input methods, as Picture 4.
Picture 4.46 Return to language and input method, click default, as Picture 4.47, choose the input method you want to change. Picture 4.47 4.13 Backup and Reset Click backup my data, when WIFI is connected and login Google account, system will copy your data into Google server. If you wish to reset factory setting, please click restore factory reset, as Picture 4.48, if you need to format NAND, please click erase internal storage, and click reset tablet.
Picture 4.48 4.14 Add Account 1. Click Setting application 2. Click Add account, as Picture 4.49 Picture 4.49 3. If login successfully, sync function will auto open, as Picture 4.
Picture 4.50 4.15 Date and Time According to the preset, system will voluntorily apply the date, zone, and time provided by internet. Manual set date, time and zone 1． Click Setting application procedure. 2． Slide down the screen, then click date and time. 3． Turn off “auto setting of date and time”. 4． Turn off “auto setting zone’. 5． Click Zone Selecting, then choose the zone lists. Slide down the list to view more zones.
Picture 4.51 Note: If you use the time network provided, you can’t set date, time and zone. 4.16 Scheduled power on and off 1. Enter into setting application. Click to enter into scheduled power on 2. Click scheduled power on and off selection. setting 3. Operation as below Picture 4.52 Click to enter into scheduled power off Open/close scheduled power on Open/close scheduled power off Picture 4.
4.17 Accessibility 4.17-1.Large text Click it to make system font become large. 4.17-2 Power button ends call Click it to end call in power button, but not sleep. 4.17-3 Touch and hold delay Click touch and hold delay to adjust time, as Picture 4.53 Picture 4.53 4.17-4. Add webpage accessibility function Open system to allow you to install webpage sript, but it will increse the safy risk when browsing webpage. 4.18 Engineer Selection Click engineer selection, click right top icon, this function is opend.
Open USB adjustment, use some software to read MID, but when open USB adjustment, USB storage needs to manual adjust. 4.18-4 Show touch operation Open touch operation, it will show you touch operation on MID, it is suggested to use pointer together to make it clear. 4.18-5 Pointer location After opening pointer, you can read MID touch vertical and hirizonal coordinate operation. 4.19 About Tablet System update Put the update.zip into internal storage or SD card, click check update to update, as Picture 4.
5 Multi-Media 5.1 Music Enter into music player: in menu or desktop click music icon to enter into music player, click the music you want to play, as Picture 5.1: Picture 5.
Picture 5.2 z Drag the progress bar to adjust play progress. z Operation of music player button as Picture 5.2 5.2Video 1. Enter video player: choose 2. application in main menu, choose the video you want to play. Operation of video player button as Picture 5.3 Progress adjustment play/pause Choose the screen mode Picture 5.3 5.3 Photo Gallery Photo gallery application can auto search photos and video files in SD card, and photo gallery will classify these photos and videos in folder.
Note: when you browse the pictures, slide left or right to view more pictures. Edit and set pictures When check the pictures in full screen mode, click menu key to display menu selection, you can choose the selection you need to edit and setting pictures. z Slide Show 1. Open a picture, use virtual key to click menu key, display menu selection. 2. Click slide show, it will auto loop play(or choose button in picture folder) z Crop 1. Click menu key to display menu selection. 2.
Switch front and rear camera View pictures videos the and Slide zoom Click take picture to to Camera mode Video mode Picture 5.4 5.5 FM Radio in the main interface or desktop to enter into FM radio interface: Click z Connect earphone z Click Open speaker button in right top of Picture 5.5 Enter into channel list Flashlight White balance Menu key Color effect Save button Full screen play Current frequency Next channel Previous channel Picture 5.
Picture 5.6 z RDS setting: click Menu key in interface, click button, enter into RDS setting as Picture 5.7, and choose the selection you want to add Picture 5.7 z Save channels: Click button in the main interface to save the channel, and the channel will be saved in channels list. Note: FM radio require earphone connect as antenna, if no antenna, your MID can’t search FM frequency.
6 Communication Function 6.1 Phone 1 Click Phone application procedure 2 Operate as Picture 6.1 Call history contact The area of dial phone Display phone numbers Dial phone numbers Function key Hide number keyboard Picture 6.1 6.2 Text Message Search information 1. Enter into main menu, choose application procedure.
2. Click “Edit new message” Add receiver Directly input phone number Send message Picture 6.2 6.3 Contact List Click Contact list in the main interface, enter into the contact list as Picture 6.3 Picture 6.
z Add contact: click button, enter into add contact interface. 7 Internet 7.1 Browser In case of Wi-Fi or mobile internet is connected well (Please refer to Chapter 4.2 for wireless and internet setting), click IE browser Picture 7.1 in the main menu or desktop to enter the IE interface, as Save bookmark Search View bookmark and history Website Picture 7.1 7.
Picture 7.2 a. Email Setting 1． After you click the sending email icon , you can see the email setting guide, which can help you to set. 2． Input your email address and password. 3． Click “Next step” button to check whether the email box servicer can receive or send emails. 4． Input the email account and display the email subiject, and click finish. 5． If the email box is available, you will enter into your mail box automatically. b.
3． Press Menu key. Menus will popup. 4． Click Edit to enter into new email editing interface. 5． Input the receiver’s email address. 6． Input the subject and email content. 7． If you want to add attachment, click menu key, the menu popup. 8． Click “Add attachment” (pictures, video). 9． Click “send” to send the email out. Add attachment Picture 7.
8 GPS Function 8.1 GPS Navigation 1. Map of the third parties is required for MID internal GPS satellite signal receiver positioning, after installation the device can accurately implement traffic real-time navigation, meet the needs of outdoor navigation. 2. Enter into setting interface, click icon, enter into below picture 8.1 Return Picture 8.1 When positioning successfully, the blue parts will turn to green color, and it shows the latitude, longitude, height, speed, and the time of your location.
Value Picture 8.
9 Other Application Procedures 9.1 Clock Click Clock procedure, enter into below interface as Picture 9.1. There are clock, picture, music and homepage buttons. Set alarm Picture 9.1 9.2 Calculator 1. Click 。 2. Enter into the basic board of calculator. 3. Soft touch the numbers or operator in calulator to calculate.
Picture 9.2 9.3 File Manager File manager will copy, cut, delete, rename the documents or the folder in the TF card, it also will share the files, install apk etc. In the main menu or desktop, click the document manager icon manager. Internal storage External card Picture 9.
a. Copy, cut, delete, rename the files and folder: choose the file or folder, long pressthe file or Delete Copy folder to enter into the interface as Picture 9.4, you can Select operate the file or folder. Cut Picture 9.4 b. Paste the file or folder you copy or cut: in the catalogue you want to paste, choose right top, as Picture 9.5 Picture 9.
c. Share file: choose any file, long click this file, choose icon in right top, it willl show share selection. Picture 9.6 d. Install apk file：Choose the file suffixed .apk in the file manager, you can install the third part software as reminder. e. Build new folder: Choose the menu you want to build the file, click Menu key, choose new folder, you can build new folder as reminder. 9.4 Recorder In the main interface or desktop, click recorder icon record key to start record.
Picture 9.
10 Installation of Procedures 10.1 Installation Install the third party application procedure 1. Click “file manager” application procedure; choose the application procedure you need to install. 2. Hold the application procedure you need to install. 3. It popup install, click install apk. 4. Finish the installation as guide, it will operate. Note: The third party procedure searched from internet to use on the system are all suffixed with .apk. 10.
11 Troubles Shooting 1. The first startup of MID is slow After the MID system upgraded, the first startup need to install the pre-installed application softwares, the lead time is around 2-3 minutes, the startup afterwards will be much quicker. 2. 3. MID can’t connect Wi-Fi z Make sure the wireless router of internet service can work in normal. z Ensure the MID and wireless router in certain distance, and no wall or other barrier between them. z Ensure the user name and password both correct.
FCC Warning Specific Absorption Rate (SAR) information SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power output.
