Description Page(s) Description Page(s) 2 Voice Recording 18 3 Exit 19 Siren ON/OFF 20 Layout -Front 4 Input(Overall) 21 Layout -Rear 6 22 8 Bypass & Delay Time 23 Order of installation 9 Chime Function 24 Power and Sensors 10 Main Body, Picador Sensors 11 Remote Control 25 Remote Control Code 26 Attention & Request 12 27 Remote Controller 13 28 Sensors 14 Telephone Number is PIR Sensor & Remote Controller 29 Emergency Call 16 RF Transmitter & Door Sensor 30 Password 17 WARNING Notice: Please Read Carefully
Standard Sc : SpeedCop™ 2000 Division ITEM Appearance Specification Power Supply Unit : COVE Battery, 600mA Power Consumption : Disarms(156mA), Armus(300mA} Max. Sensor No. : 7 Wireless + 2 Wire Max. Remote control No. : 7 units Mas. recording No.
Speed Cop™ 2000 Gas Controller: Gas Shut off Devise EARP Detection Method : Contact Combustion Response Speed: Within 20 Sec. Detects LNG & LPG, Butane/Methane Gas Fowler : AV 2209, S0/60Hx Power Consumption : 2.7W | Dimensions : 44D x 14TH x 100 Power : AV 110/220 (GOH) Power Consumption ; 1.3W Output Voltage : DECEIVE Operating Temperature : 10 ~+4} Relative Humidity Valve : Resew Type(Ball Valve) Power : DCI2Y Power Consumption : 2.5W Shut-off Speed : § See.
out Front The front cover is opened Main Body(Front) 80a aww owe uve: Come Open P Dynamic Technology Inc.
Layout Frc iCop™ 2000 1. Front Cover : Main body cover of Speed Cop™ 2000 2. Arming LED : Per each sensors Red light shows when the sensor is armed 3. Antenna : Receiving the F'M signal of each sensors 4. Arming LED : Classification of Among or Disarming 5. Power : Checking of power light) 6. LCD(Liquid Crystal Display) : Showing the order or input text on the LCD 7. Arm: Arming of all the sensors. 8. Disarm : Disarming of all the sensors, 9. Bypass : Bypass the selected sensors by user's requirement. 10.
Layout Rear 1. Speaker : For siren, ARS comment or key tone. 2. Telephone port : Connecting port between the main body and telephone 3. Line port : Connecting port to main body from the line of the telephone office 4. T Hanger : Use when the main body is hanging on the wail 5,6. Telephone line terminal : Connecting to Line port No.3 or telephone line terminal which comes from telephone office line 7. Output A: The first output terminal for controlling sensors or siren at the main body 8.
Intruders & Emergency Automatic Dialing to the personal Cellular Phone or other designated destination {7 Memorized Telephone Numbers) Tapping and checking by sounds from the outside Controlling of the intruder with Siren and arms(Option) Call to related office or neighbor for help. Dynamic Technology Inc.
Installation Guide » Telephone Line Connecting of Power & Telephone line ee Telephone Office Line AC 110V, 60Hz Connecting of Sensors picture 2 A A | (} @Dynamic Technology Inc.