User Manual for TWS PI8S Bluetooth Earbuds Please carefully read the manual before use and operate the product strictly according to the manual.
Product Model:P18S Bluetooth Version: Bluetooth V5.3, compatible with V4.2/V4.2 LE/V3.0/V2.1+EDR Systems Bluetooth Protocol: Bluetooth V5.3 Frequency Range: 2400-2480MHZ Modulation System: GFSK Frequency Response Range: 20HZ-20KHZ Crystal Oscillator Frequency: 24MHZ CPU Frequency: domain frequency 160Mhz, 32 bit RISC Internal Memory: Flash 4M Operating Voltage: DC 2.2V-5.
Standby Time: 10-15 days Headset Weight: ca. 3.5g Disclaimer Please do not optionally disassemble the product. Please use the charging wire that comes with in the box and 5V chargers for charging, in order to avoid product damage and accidents. The earbuds can be worn on the left and right ears. In the Box: Earbuds …… 1 pair User Manual …… 1 PCS Charging Wire …… 1 PCS Connecting Connection only possible with mobile devices with Bluetooth function. 1.
light turns red while charging. The indicator light turns off after when battery is fully charged. While charging the earbuds are turned off. After the charging process, earbuds will turn on automatically and repair and try to reconnect with device. 2. Power on and power off: If the earbuds are not connected to a device for a long time it will automatically powers off. Press the Function Button for 2s to turn them on or put them back into the charging case.
4. Indicator lights when connected: When paired the host earbud’s indicator flashed red and blue while the auxiliary side slowly flashes blue. After the earbuds pair is connected to a device the indictor lights on both sides will turn off. 5. Smart Memory feature: Once connected to a device, the earbuds will automatically pari each other and connect to former connected device even after turning off and on or charging.
8. When a single earbud is used (no matter left or right one) and it is connected to a mobile phone and music is playing, double press the Funtion Button to forward to the next track and press once to stop the music. If there is an incoming call, press once to answer the call and double press to refuse the call For calling back, please stop the music and double press to Function Button. Operation 1.
call back the last telephone number. When a call comes in, the music is automatically stop and the ring tone will be played. 2. Answer incoming call When there is an incoming call, the earbuds and the mobile phone sends out the ring tone. Press the Funtion Button once to answer a call and press it again to end a call. Double press the Funtion Button to refuse a call. 3. Call Adjustments The incoming calling number will be recited through both earbuds.
reduced to 3.1V, the earbuds will automatically powers off. 5. Automatic Power Off No matter whether just one earbud or 2 paired earbud are used, if there is no connection to a device for 4min, they will automatically power off. 6. Single Earbud: When a single earbud is used (no matter left or right one) and it is connected to a mobile phone and music is playing, double press the Funtion Button to forward to the next track and press once to stop the music.
is fully charged, all indicators will turn off and charging case and ear buds enter Standby Mode. Operating Instructions for Charging Case: Charge Charging Case 1. 2. 3. 4. The charging case Status Diplay shows the percentage of battery life (1-100%) and the indicator lights on the sides show the L&R earbuds’ battery life. To charge the charging case, please use the standard charge wire that comes with in the box to connect the charger, which must have DC 5V output.
5. 6. which can be used to charge your mobile device. When earbuds are inserted into the charging case, they will be automatically charged. The flashing the indicator lights on the sides of the charging case indicates the charging process of the earbuds are active. When all side indicator turn solid, the earbuds are fully charged. After charging all indicators will power off. If the product is not used for a long time, it’s suggested too completely discharge and charge the charging hub once in a month.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules.