2017 OWNER’S MANUAL
THE CHOICE OF CHAMPIONS ™ = HYPERLINK TO MORE INFORMATION INCLUDED WITH YOUR M-2 MARKER • 3 Piece barrel kit (1) 14” UL Barrel tip (1) .684” UL Barrel back (1) .688” UL Barrel back • Dye multi tool • 1/4oz slick lube • Parts kit • • • • • • SEE M2 COLOR OPTIONS W W W . D Y E P A I N T B A L L .
M2 OWNER’s MANUAL WARNING TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES • The M2 marker is not a toy. Misuse may cause serious injury or death. • Please read, understand and follow the directions in the M2 owner’s manual. • Eye protection that is designed specifically for paintball and meets ASTM/CE standards must be worn by user and persons within range. • Recommend 18 years or older to purchase. Persons under 18 must have adult supervision.
QUICk REFERENCE AIR SUPPLY The M2 should be operated using air/nitrogen gas only. This air needs to be supplied at a regulated pressure of no more than 850 psi. GASSING UP YOUR M2 Screw in your air system to the Airport and rotate the side lever counter clockwise until the internal stop is reached. TURNING ON YOUR M2 Power up M2 marker. Note: Be sure to fully charge your M2 marker before first use.
PRISM INTERFACE ThE PRISM INTERFACE AND METhOD OS air The massive 1 inch, full color, high resolution OLED screen, combined with the 5-way Joystick provides simple control of the M2. Intuitive navigation gives you access to DYE’s Method Operating System. Prism is an intuitive interface, for an advanced operating system. The joystick control index will help you become quickly familiarized with interfacing with the Method Operating System.
METhOD OS AIR (MOSair) BATTERY LEVEL SELECTED PROFILE BT CONNECTION STATUS EYE SYSTEM STATUS COUNT DOWN GAME TIMER RATE OF FIRE FIRING MODE SHOT COUNTER TOURNAMENT LOCK PLAY SCREEN You are able to select between 3 play screens depending on what information you wish to have displayed. Option 1 is the default setting, for more play screen options see Select Play Mode Screen under Data Settings (page 6).
METhOD OS AIR (MOSair) PERFORMANCE SETTINGS GAME CLOCk Set countdown game timer. (Default 2:30) To operate game timer in play mode press the joystick right to start and stop the game timer, Press and hold the joystick right for 2 seconds to reset. DWELL Values 1 - 30 (Factory Default 15) Dwell is the amount of time, in milliseconds, that the solenoid is activated for each shot.
METhOD OS AIR (MOSair) DATA SETTINGS CUSTOMIZE PROFILE NAME (Factory Defaults P1-P5, Factory) Personalize each Profile with a distinct name to help identify them. Move the joystick up and down to scroll through letters numbers and special typescript. Move the joystick left and right to change the next character. SELECT PLAY SCREEN Values 1-6 (Factory Default 1) Select the best play mode screen for your style of play. v2.01.1 v2.01.1 v2.01.
METhOD OS AIR (MOSair) DATA SETTINGS SHOT TRACKER SHOT TRACKER SHOT TRACKER MODE : COUNTDOWN MODE SETTINGS MODE : SUM ShOT TRACkER The shot tracker helps you monitor your paint consumption during a game or a day. choose between countdown and sum track. The Shot tracker can be set to zero from the Data settings Menu. And reset from the play mode screen. To reset from the Play mode screen press and hold the joystick left for 2 seconds.
METhOD OS AIR (MOSair) RATE OF FIRE PEAk/AvERAGE The peak rate of fire is the shortest amount of time between any two shots in a stream of shots. The average rate of fire is the average ROF in a stream of shots. AUTO ShUT OFF Values 10 – 60 min (Factory Default 10 min) The board will automatically shut down if the marker is not used for a set period of time. You can adjust the shut off time.
METhOD OS AIR (MOSair) SERvICE SYSTEM 75000 SHOTS 100000 SHOTS RESET 75000 SHOTS 100000 SHOTS RESET ON LOWPRESSURE PRESSURE LOW HIGH PRESSURE HIGH PRESSURE ZERO-START COUNT 4000 SHOTS 8000 SHOTS RESET 1/5 2/5 FUSEBOLT BOLT FUSE The Service system tracks shots fired and when the major components of your marker need to be serviced. You can adjust your service schedule based on weather and playing conditions. More severe conditions will require service more often.
METhOD OS AIR (MOSair) TRAINING MODES The M2 has 3 training drills to help you hone your skills. Access the training mode in the settings adjustment menu. Scroll left or right to reach the Training Mode screen. Press the Center of the joystick to select. Scroll Left or Right to select the training mode of your choice. With the Desired Drill screen displayed press the center of the joystick to start the drill.
Upgrade Cable SOFTWARE UPGRADE • Scroll down and select upgrade software. • Confirm you wish to upgrade the software. Periodically DYE will release new updated software for the M2. The new software will be available on www.dyem2.com, and www.dyepaintball.com TO UPDATE YOUR M2’s OPERATING SYSTEM FOLLOW ThESE SIMPLE DIRECTIONS. • Save the new operating software to your Customer Support Passport, or any standard flash drive. • Plug the flash drive into the upgrade cable (supplied with your M2).
Upgrade Cable CUSTOM BOOT SCREEN INSTALL • Select Upgrade Custom Boot Screen. • Confirm you wish to Upgrade Custom Boot Screen. SELECT CUSTOM BOOT SCREEN provides remarkable detail and image resolution. Before you can download a photo onto the board it will fi rst need to be converted to a .bmp fi le sized 128 x 128 pixels. You can use any number of free online programs such as the one listed below to convert your photo. http:// image.online-convert.
REChARGEABLE BATTERY The M2 comes standard with a lithium ion rechargeable battery. The battery is housed in the grip frame, on the right side under the sticky grip. There is no need to access the battery at any time. Charging is done through the micro USB port located on the upper left side of the sticky grip. NOTE: Be sure to fully charge your M2 marker before first use. BATTERY ChARGING INSTRUCTIONS To access the M2’s charging port open the dust cover labeled USB on the upper left side of the grip.
