Specification Sheet

DXV MODULUS

™

VESSEL FAUCET

• Sleek, modern design with uid and

balanced proportions

• Features a decorative base ring with a two tone

nish in either Polished Chrome or Brushed Nickel,

depending on the Faucet nish selected

• Ceramic disc valve cartridges

• Lead Free—faucet contains ≤0.25% total

lead content by weighted volume

• Maximum ow rate: 1.2 gpm (4.5 L/min)

CODES AND STANDARDS

Meets or Exceeds ASME A112.18.1/ CSA B125.1,

NSF 61/Section 9

EPA WaterSense® Certified

Certified Compliant with ≤0.25% Weighted

Average Lead Content Regulations

CEC and CALGreen® Compliant

DESCRIPTION PRODUCT NUMBER

Vessel Faucet D35120152.XXX

AVAILABLE FINISHES FINISH CODE

Polished Chrome 100

Brushed Nickel 144

Platinum Nickel 150

Matte Black 243

ROUGH-IN DIAGRAM

SHOWN ON NEXT PAGE

Meets the Americans with Disabilities Act

Guidelines and ANSI A117.1 Requirements

for the physically challenged.

CALGreen® is a registered trademark of

California Building Standards Commission.

PAGE 1
DXV MODULUS™ VESSEL FAUCET •S leek, modern design with fluid and balanced proportions •F eatures a decorative base ring with a two tone finish in either Polished Chrome or Brushed Nickel, depending on the Faucet finish selected • Ceramic disc valve cartridges •L ead Free—faucet contains ≤0.25% total lead content by weighted volume • Maximum flow rate: 1.2 gpm (4.5 L/min) CODES AND STANDARDS Meets or Exceeds ASME A112.18.1/ CSA B125.
PAGE 2
DXV MODULUS™ VESSEL FAUCET 6-15/16" (160 mm) 1-5/16" (33 mm) 5-5/16" (135 mm) 9-5/8" (244 mm) 10-11/16" (271 mm) 9" (228 mm) 2-9/16" (65 mm) 2-3/8" (60 mm) NOTE: MOUNTING HOLES ARE 1-3/8" D. (35 mm) IMPORTANT: These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. ©2018 AS America Inc. 4/18 www.dxv.