Specification Sheet

PERCY®

WIDESPREAD FAUCET

• Contemporary design with industrial elegance

• Cast brass spout and side valves

• Ceramic disc valve cartridges

• Distinct, geometric handle design

• 3/8" compression braided, stainless steel exible

supply hose

• Speed Connect® with 1-1/4" drain

• Lead Free—faucet contains ≤0.25% total

lead content by weighted volume

• Maximum ow rate: 1.5 gpm (5.7 L/min)

• Low ow rate: 1.2 gpm (4.5 L/min)

CODES AND STANDARDS

Meets or Exceeds ASME A112.18.1/ CSA B125.1,

NSF 61/Section 9

EPA WaterSense® Certified

Certified Compliant with ≤0.25% Weighted

Average Lead Content Regulations

CEC and CALGreen® Compliant

LeverCross Tri-Spoke

Meets the Americans with Disabilities Act

Guidelines and ANSI A117.1 Requirements

for the physically challenged.

DESCRIPTION PRODUCT NUMBER

Widespread Faucet

1.5 gpm (5.7 L/min)

— Cross Handles ★ D35105840.XXX

— Lever Handles (ADA only) ★ D35105800.XXX

1.2 gpm (4.5 L/min)

— Cross Handles D3510584C.XXX

— Lever Handles (ADA only) D3510580C.XXX

— Tri-Spoke Handles (ADA only) D35105870.XXX

AVAILABLE FINISHES FINISH CODE

Polished Chrome 100

Brushed Nickel 144

ROUGH-IN DIAGRAM

SHOWN ON NEXT PAGE

★DISCONTINUED. Available while supplies last.

CALGreen® is a registered trademark of

California Building Standards Commission.

PAGE 1
PERCY® WIDESPREAD FAUCET • Contemporary design with industrial elegance • Cast brass spout and side valves • Ceramic disc valve cartridges • Distinct, geometric handle design •3 /8" compression braided, stainless steel flexible supply hose • Speed Connect® with 1-1/4" drain •L ead Free—faucet contains ≤0.25% total lead content by weighted volume • Maximum flow rate: 1.5 gpm (5.7 L/min) • Low flow rate: 1.2 gpm (4.5 L/min) CODES AND STANDARDS Meets or Exceeds ASME A112.18.1/ CSA B125.
PAGE 2
PERCY® WIDESPREAD FAUCET 6" to 12" (152 to 305 mm) 2-1/2" (63 mm) LEVER HANDLE MOUNTING SURFACE 5-7/16" (138 mm) 3-1/8 (80 mm) 1-1/2" (37 mm) CROSS HANDLE 6-9/16" (167 mm) 10" (254mm) 2-1/4" DIA. (57 mm) 7/8" DIA. (22 mm) TRI-SPOKE HANDLE 1-1/2" MAX. (38 mm) 3" (77 mm) CONNECTIONS: • 1/2" IPS FLEXIBLE SUPPLIES • 3/8" O.D. BULL-NOSE RISERS 2" MAX (51 mm) 10-1/2" MAX. (267 mm) 1-1/4" O.D. (32 mm) NOTE: MOUNTING HOLES ARE 1-3/8" DIA.