IronX HD Camcorder DXG-5G9V HD User’s Manual
Table of Contents About this manual............................................................iv Copyright..........................................................................iv Precautions........................................................................v Operating conditions .............................................. vi Notes on Waterproof Case...............................................vii Before You Start ................................................................
2.8 3 Capturing Videos and Photos.................. 19 3.1 3.2 4 Connecting to PC (Micro USB Cable) .................18 Recording Videos..................................................19 Taking Photos .......................................................19 3.2.1 WiFi ...........................................................20 3.2.2 Burst Shooting ..........................................20 3.2.3 Time Lapse Shooting ...............................21 3.2.4 Self-Timer...............................
5.1 Waterproof Case ...................................................42 5.1.1 Using the Waterproof Case.....................42 5.1.2 Changing the T Tip Adapter ..................43 5.1.3 Changing the Housing Back Door.........44 5.2 5.3 5.4 Velcro Strap...........................................................44 Assembling the Camcorder Accessories...............45 RF Wrist Strap Remote Control............................46 Appendix............................................................
Preface Congratulations on your purchase of this advanced camcorder. Ensure that you read this manual carefully and keep it in a safe place for future reference. About this manual Every effort has been made to ensure that the contents of this manual are correct and up to date. However, no guarantee is made regarding the accuracy of the contents. The manufacturer reserves the right to change the contents, technology, and specifications without notice. Copyright © Copyright 2013. All rights reserved.
Precautions General precautions • • • • • • • • • Do not store the product in dusty, dirty, or sandy areas, as its components may be damaged. Do not store the product in a hot environment. High temperatures can shorten the life of electronic devices, damage batteries and warp or melt certain plastics. Do not store the product in cold areas. When the product warms up to its normal temperature, moisture can form inside, which may damage the electronic circuits.
Operating conditions • • This camcorder is designed for use in temperatures ranging from 0°C to 40°C (32°F to 104°F). Do not use or keep the camcorder in the following areas: - In areas subject to direct sunlight - In areas subject to high humidity or dust - Near air conditioners, heaters, or other areas subject to temperature extremes - Inside of a closed vehicle, especially one parked in the sun.
Notes on Waterproof Case Waterproof Case performance • • • • • The waterproof case performance is equivalent to IPX8. Underwater time limit: Do not use the waterproof case underwater for more than 60 minutes to ensure water resistance. The waterproof case is not dust-proof. The camera and other accessories are not waterproof unless enclosed by the waterproof case. When using the camcorder in cold or humid environments or when going underwater, use the anti-fog insert to prevent fogging.
Notes for general use: • • • • • Avoid opening or closing the waterproof case near the water’s edge (sea, lake, beach, lake, etc.). Do not open or close the waterproof case lock with wet hands, or hands with sand or dust. The accessories (batteries, etc.) used with the camcorder are not water resistant, be careful in using them. Do not drop the waterproof case to ensure waterproof durability. Do not place the waterproof case in temperatures above 40°C or below 0°C to ensure waterproof durability.
Notes on waterproof case maintenance • The waterproof of sealing material is replaceable for a fee. The material should be replaced once a year to maintain its water resistance. After using the waterproof case • • • • Be sure to come ashore within 60 minutes after going underwater, this will maintain the appearance, quality and water resistance of the waterproof case. After taking pictures underwater, clean the waterproof case with running tap water.
Before You Start Take some test shots before you use your camcorder. Before taking pictures with this camcorder, test the camcorder beforehand to ensure that it functions properly. Any additional loss caused by the malfunction of this product (such as costs of photography or any loss of benefit generated by the photography) is not the responsibility of the manufacturer and no compensation will be given for it. Copyright information Take care to observe "No Photography" notices in certain locations.
1 Introducing the Camcorder Read this section to learn about the features and functions of the camcorder. This chapter also covers system requirements, package contents, and descriptions of the hardware components. 1.1 System Requirements The camcorder requires a PC with the following specifications for full HD 1080p 30fps and 720p 60fps playback: • Windows® 8 /Windows® 7 /Vista / XP (SP2) / MAC OS X 10.
• • External Waterproof Case/Standard Mounts/Wrist Remote Smartphone App Supported 1.3 Unpacking the Camcorder The following items should be present in the package. If any item is missing or appears damaged, contact your dealer immediately.
Standard Accessories Waterproof Case Vented Housing Backdoor Waterproof Housing Backdoor T Tip Adapter Flat Adhesive Socket Curved Adhesive Socket Lens Cap Secure Tether Velcro Strap Swivel T Tip RF Wrist Strap Remote Control Anti-fog Inserts 3
Optional Accessories 4 Diving Case Chest Mount Adhesive Anchor Bike Mount Adhesive Ball Head T Tip Ball Head T Tip with Suction Cup Swivel Camera Tip with Suction Cup Vented Head Mount T Tip Mount (compatible with GoPro mounts) Camera Holder Standard Tripod Adapter
Handlebar Mount (Camouflaged Sticker included) Rail Mount (Camouflaged Sticker included) 5
1.4 About the Camcorder Refer to the following illustrations to familiarize yourself with the buttons and controls of this camcorder. 1.4.
1.4.2 Button Functions Power / Mode Button • Press and hold for 3 seconds to turn the camcorder on or off. • Press to switch to different modes: Video, Photo, WiFi, Burst, Time Lapse, Self-timer, and Set mode. • In Set mode, press to scroll through menu items. • Shutter Button • • In Video mode, press to start/stop video recording. In Photo mode, press to take a photo. In Set mode, press to select an item.
1.4.3 LED Indicators The camcorder has four LED indicators. The Power/Status LEDs are located on top, on the bottom, and on the back of the camcorder. These LEDs are designed for users to see the status of the camcorder whichever way the camcorder is held or mounted.
2 Getting Started Read this section to learn how to start using the camcorder. This section covers basic functions such as switching on, installing the battery and micro SD card, and configuring preliminary settings. See later chapters for advanced functions. 2.1 Installing the Micro SD Card A micro SD card is required to capture photos and videos. The camcorder supports micro SDHC cards up to 32GB. 1. Insert the micro SD card into the card slot with the gold contacts facing the front of the device. 2.
2.1.1 Removing the Micro SD card 1. Turn off the camcorder. 2. With a fingertip, push the micro SD card to eject it from the slot. 3. Remove the micro SD card. 2.2 Installing the Battery Warning: Use only the supplied battery or a similar battery recommended by the manufacturer or the dealer. 10 1. Push down the battery compartment cover to open it. 2. Align the battery contacts and then insert the battery into the compartment with the ribbon underneath the battery.
3. 2.2.1 Close the battery compartment cover. Removing the battery 1. Open the battery compartment cover. 2. Pull the ribbon to remove the battery.
2.3 Charging the Battery You can charge the battery using the micro USB cable that came with the camcorder. Follow the steps below to charge the battery. 1. Install the battery into the battery compartment. 2. Plug the micro-USB connector to the USB port of your device. 3. Plug the other end of the USB cable to a computer. The battery LED blinks red. After a full charge, the LED turns off. Approximate charging time is 240 minutes with a USB connection.
2.4 Turning ON/ OFF the Camcorder • To turn on the camcorder, press the Power button. The Power/Status LED indicator lights green. • To turn off the camcorder, press and hold the Power button for 3 seconds.
2.5 OLED Screen When the camcorder is turned on, the OLED screen displays the following information: 1 4 2 5 3 Current Mode 1 14 Displays the current mode of the camcorder. Video Mode Use this mode to record videos. The icon also indicates the current video recording settings. Photo Mode Use this mode to capture photos. The icon also indicates the current capture settings. WiFi Mode Select to connect the camcorder to a smartphone using WiFi connection.
Burst Mode Use this mode to capture 10 continuous photos with one press of the Shutter button. The icon also indicates the current capture settings. Time Lapse Mode In this mode, photos are continuously captured with a specific interval time when the Shutter button is pressed. To stop capturing, press the Shutter button again. The icon also indicates the current capture settings. Self-timer Mode In this mode, photos are taken 10 seconds after pressing the Shutter button.
4 5 16 Number of Files Battery Indicates the total number of videos and photos saved in the micro SD card. Indicates the battery capacity.
2.6 Changing Modes Press the Mode button repeatedly to switch modes.
2.7 Connecting to TV (HDMI Cable) You can also connect the camcorder to a TV using the HDMI cable (optional). 2.8 Connecting to PC (Micro USB Cable) Connect the camcorder to a computer with the micro USB cable provided as shown.
3 Capturing Videos and Photos 3.1 Recording Videos Your camcorder supports Dual Stream recording. When a video is recorded, two video files of different file size are automatically saved in the memory card. The smaller file is used to view videos using a smartphone. 1. Turn on the camcorder. By default, the camcorder automatically opens to Video mode. 2. Press the Shutter button to start recording. 3. Press the Shutter button to stop recording. 3.2 Taking Photos 1. Turn on the camcorder. 2.
3.2.1 WiFi This menu allows you to connect your camcorder to a smartphone using WiFi connection and view the videos and photos recorded from your camcorder on the smartphone. Note: Before using this feature, download the IronX app from AppStore (iOS) or Google Play (Android OS) on your smartphone. 1. Press the Mode button repeatedly to switch to WiFi mode. 2. Press the Shutter button to toggle WiFi ON or OFF. 3. Press the Mode button to exit the WiFi screen. 3.2.
3.2.3 Time Lapse Shooting This feature allows you to continuously capture photos with one press of the Shutter button. Photos are captured with an interval time (1/3/5/10/30/60 seconds). Shooting only stops when the Shutter button is pressed again. 1. Press the Mode button repeatedly to switch to Time Lapse mode. 2. Press the Shutter button to start capturing photos. 4. Press the Shutter button again to stop capturing photos. 3.2.
4 Adjusting the Settings To adjust the camcorder settings, press the Mode button repeatedly to switch to Set mode and then press the Shutter button to confirm. The screen below is displayed: 1 2 3 4 SETUP Menu Video Select to adjust the video resolution. FOV Select to adjust the field of view of the camera. Time Lapse Select to adjust the interval time between capturing photos in Time Lapse mode. Up/Down Select to set the camcorder direction upside down.
MORE Menu Select MORE to adjust basic camera settings. Up/Down Select to set the direction of the OSD screen display. LED Select to turn the LED on or off. Bright Select to adjust the screen brightness. Beep Select to adjust the beep volume. Auto-Off Select to set the time for the camcorder to automatically turn off when not in use. TV Select to set the TV system to NTSC or PAL. Time Select to set the camcorder date and time. RF Select to pair with the RF remote control.
4.1 Video Resolution Your camcorder supports Dual Stream recording. When a video is recorded, two video files of different file size are automatically saved in the memory card. The smaller file is used to view videos using a smartphone. The camcorder captures photos with a fixed resolution of 5M and supports three resolution options for videos. Do the following to select the video resolution. 1. Press the Mode button repeatedly to change to SET mode. 2. Press the Shutter button to enter SET mode. 3.
16:9 HD video, 720P (1280x720, 60fps) 7. Press the Shutter button to confirm. 8. To exit the menu, press the Mode button repeatedly until the EXIT screen appears. 9. Press the Shutter button to exit SET mode. 4.2 Field of View (FOV) This menu allows you to select the view angle of the camcorder lens. Do the following to select the FOV. 1. Press the Mode button repeatedly to change to SET mode. 2. Press the Shutter button to enter SET mode. 3. Press the Mode button to highlight SETUP. 4.
7. Press the Mode button to select ULTRA or WIDE. Ultra wide angle lens Wide angle lens 8. Press the Shutter button to confirm. 9. To exit the menu, press the Mode button repeatedly until the EXIT screen appears. 10. Press the Shutter button to exit SET mode. Note: Ultra and Wide are only available in Photo mode. The FOV for Video mode is always Ultra. 4.3 Shooting Interval This menu allows you to select the interval options when capturing photos using Lapse mode.
4. Press the Shutter button to enter the SETUP menu. 5. Press the Mode button to highlight LAPSE. 6. Press the Shutter button to enter the LAPSE submenu. 7. Press the Mode button repeatedly to scroll through the shooting interval options: 1 SEC, 3 SEC, 5 SEC, 10 SEC, 30 SEC, and 60 SEC. 8. Press the Shutter button to confirm. 9. To exit the menu, press the Mode button repeatedly until the EXIT screen appears. 10. Press the Shutter button to exit SET mode. 4.
3. Press the Mode button to highlight SETUP. 4. Press the Shutter button to enter the SETUP menu. 5. Press the Mode button to highlight UP/DOWN. 6. Press the Shutter button to enter the UP/DOWN submenu. 7. Press the Mode button to select ON or OFF. 8. Press the Shutter button to confirm. 9. To exit the menu, press the Mode button repeatedly until the EXIT screen appears. 10. Press the Shutter button to exit SET mode. 4.5 Delete This menu allows you to delete all files in the Micro SD card.
3. Press the Mode button to highlight SETUP. 4. Press the Shutter button to enter the SETUP menu. 5. Press the Mode button repeatedly to highlight DELETE. 6. Press the Shutter button to enter the DELETE submenu. 10. Press the Mode button repeatedly to scroll through the delete options. To delete the last captured video or photo. To delete all files in the micro SD card. To format the micro SD card. 7. Press the Shutter button to confirm. 8. Press the Mode button to select √ to confirm deletion.
10. To exit the menu, press the Mode button repeatedly until the EXIT screen appears. 11. Press the Shutter button to exit SET mode.
4.6 OSD Up/Down This menu allows you to display the OLED screen upside down. Do the following to enable this feature. 1. Press the Mode button repeatedly to change to SET mode. 2. Press the Shutter button to enter SET mode. 3. Press the Shutter button to enter the MORE menu. 4. Press the Shutter button to enter the UP/DOWN submenu. 5. Press the Mode button to select OSD UP or OSD DOWN. 6. Press the Shutter button to confirm. 7.
4.7 LED This menu allows you to turn the LED on or off. Do the following to turn the LED on or off. 32 1. Press the Mode button repeatedly to change to SET mode. 2. Press the Shutter button to enter SET mode. 3. Press the Shutter button to enter the MORE menu. 4. Press the Mode button to highlight LED. 5. Press the Shutter button to enter the LED submenu. 6. Press the Mode button to select ON or OFF. 7. Press the Shutter button to confirm. 8.
4.8 Brightness This menu allows you to adjust the OLED screen brightness. Do the following to adjust the screen brightness. 1. Press the Mode button repeatedly to change to SET mode. 2. Press the Shutter button to enter SET mode. 3. Press the Shutter button to enter the MORE menu. 4. Press the Mode button repeatedly to highlight BRIGHT. 5. Press the Shutter button to enter the BRIGHT submenu. 6. Press the Mode button repeatedly to select 100%, 60%, or 30%. 7.
4.9 Beep This menu allows you to enable or disable the beep sound when you press the Power / Mode or Shutter buttons. Do the following to enable or disable the beep sound. 1. Press the Mode button repeatedly to change to SET mode. 2. Press the Shutter button to enter SET mode. 3. Press the Shutter button to enter the MORE menu. 4. Press the Mode button repeatedly to highlight BEEP. 5. Press the Shutter button to enter the BEEP submenu. 6.
8. To exit the menu, press the Mode button repeatedly until the EXIT screen appears. 9. Press the Shutter button to exit SET mode. 4.10 Auto-Off This menu allows you to program the camcorder to automatically turn off after being idle for a specific period of time, or you can set the setting to OFF to keep the camcorder on until you manually turn it off. Do the following to select the auto-off option. 1. Press the Mode button repeatedly to change to SET mode. 2.
7. Press the Shutter button to confirm. 8. To exit the menu, press the Mode button repeatedly until the EXIT screen appears. 9. Press the Shutter button to exit SET mode. 4.11 TV System This menu allows you to select the TV system Do the following to set the TV system. 36 1. Press the Mode button repeatedly to change to SET mode. 2. Press the Shutter button to enter SET mode. 3. Press the Shutter button to enter the MORE menu. 4. Press the Mode button to highlight TV. 5.
8. To exit the menu, press the Mode button repeatedly until the EXIT screen appears. 9. Press the Shutter button to exit SET mode. 4.12 Date and Time This menu allows you to set the camcorder date and time settings. Do the following to set the camcorder date and time. 1. Press the Mode button repeatedly to change to SET mode. 2. Press the Shutter button to enter SET mode. 3. Press the Shutter button to enter the MORE menu. 4. Press the Mode button to highlight TIME. 5.
7. When done, press the Mode button to go to the month field. Month Day Year Hour Minute 38 8. Press the Shutter button repeatedly to adjust the month value, and then press the Mode button to go to the day field. 9. Press the Shutter button repeatedly to adjust the day value, and then press the Mode button to go to the hour field. 10. Press the Shutter button repeatedly to adjust the hour value (in 24 hr or military time), and then press the Mode button to go to the minute field. 11.
4.13 RF This menu allows you to pair your camcorder with the RF wrist strap remote control (optional accessory). When the devices are paired, you can record videos or capture photos by pressing the corresponding buttons on the RF wrist strap remote control. Do the following to pair your RF wrist strap remote control. 1. Press the Mode button repeatedly to change to SET mode. 2. Press the Shutter button to enter SET mode. 3. Press the Shutter button to enter the MORE menu. 4.
7. Press both the video and photo buttons on your RF wrist strap remote control to process pairing. When the red LED on the RF wrist strap remote control flash once, pairing is complete. 8. To exit the menu, press the Mode button repeatedly until the EXIT screen appears. 9. Press the Shutter button to exit SET mode. 4.14 Factory Default This menu allows you to restore the default factory settings of your camcorder. Do the following to restore the factory default settings. 40 1.
5. Press the Shutter button to enter the DEFAULT submenu. 6. Press the Mode button to select √. 7. Press the Shutter button to confirm. 8. To exit the menu, press the Mode button repeatedly until the EXIT screen appears. 9. Press the Shutter button to exit SET mode.
5 Using the Accessories The camcorder comes with rugged accessories for all your sporting needs. 5.1 Waterproof Case The waterproof case allows you to take underwater shots or use it with the surface mount, bike mount, or chest strap to capture other water sports activities. 5.1.1 42 Using the Waterproof Case 1. Release the case lock and flip open the waterproof case. 2. Install the camcorder inside the waterproof case.
3. Secure the waterproof case lock. The waterproof case can be used with other accessories such as the swivel T tip, bike mount, chest mount, head mount, etc. 5.1.2 Changing the T Tip Adapter Depending on the accessories that you want to use with the case, the T tip adapter may be detached and attached to another housing back door or location. To detach the T tip adapter, remove the four screws securing each tip adapter to the case.
5.1.3 Changing the Housing Back Door Depending on the accessories that you want to use with the case, you may need to change the housing back door. Two back doors are included in the standard package: the waterproof housing back door, and the vented housing back door. Do the following to change the housing back door: 1. Open the back door completely. 2. Pull to detach the back door from the case. 3.
5.3 Assembling the Camcorder Accessories Lock the T tip adapter to the T tip of the adjoining accessories to install them to your camcorder.
5.4 RF Wrist Strap Remote Control Before using the RF wrist strap remote control, you must pair it with the camcorder. Do the following to pair your RF wrist strap remote control. 46 1. On the camcorder, press the Mode button repeatedly to change to SET mode. 2. Press the Shutter button to enter SET mode. 3. Press the Shutter button to enter the MORE menu. 4. Press the Mode button to highlight BINDING. 5. Press the Shutter button to enter the BINDING submenu. 6.
8. Press the Video button to start and stop video recording. To take photos, press the Photo button. Note 1: To take photos using burst mode, time lapse, or self-timer, switch to the respective mode on your camcorder and then press the Photo button on your RF wrist strap remote control. However, only one photo can be taken in time lapse mode when using the RF wrist strap remote control.
Appendix Specifications General Imaging sensor 1/2.5” CMOS 5.0 Megapixel Sensor Active pixels 5.0 Megapixel Storage media Internal: Built-in 256MB Flash Memory microSD Card, SDHC compatible (up to SDHC 32GB Class6) Sensor sensitivity Auto Camera Optics Fixed lens Wide: F2.8, f=2.5mm 110°/1080p, 150°/720p, 162°/960p, 165°/ 5M Photo Focus range 30cm ~ infinity Still image Format: JPEG (EXIF 2.
General EV Compensation -2.0EV ~ +2.0EV (Auto) PC interface USB 2.0 (High Speed) Wireless IEEE 802.11 b/g/n TV out format HDMI Shutter speed Still: 1/30 ~ 1/4000 sec. Video: 1/30 ~ 1/2000 sec. Auto power off 1min / 3min / 5min / 10min / 30min / 60min / Off Power supply Rechargeable 1130 mAh Li-ion Battery Dimensions 1.68 (H) x 2.33 (W) x 1.24 (D) in. (without lens) Weight Approx. 0.17±0.01 lbs.
Troubleshooting Problem Possible Cause The battery LED is flashing red. The battery is almost Replace with a new used up. battery or charge the battery. Nothing happens when the Shutter button is pressed. The Micro SD card is full. You cannot take photos or record videos at this point. Nothing happens when the Shutter button is pressed. “000” appears on the screen. The Micro SD card may have compatibility issues. Nothing happens when the Shutter button is pressed. “000” appears on the screen.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.
Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
Trademarks and licenses SDHC Logo is a trademark of SD-3C, L
