side of the product.) registration at our web site. (You can find the manufacturing date at the rear Please write the manufacturing date down here, which is needed for UserŪ s Manual VXA-3000 ƕ Product warranty is included in this UserŪ s Manual. ƕ Ensure to read theũSafety PrecautionsŪcarefully before using this product.
Thank you for purchasing our product. VXA-3000 Userœs Manual is designed to support convenient usage of the navigation system and safe driving. Please read the manual carefully before using the product for safe usage. The content of this manual can vary according to the navigation system version, and function or performance of the navigation system and this manual are subject to change without the prior notice for userœs convenience. Make sure to read this manual for safe driving.
Table of Contents Basic Operation 3 Upgrading VXA-3000 62 About VXA-3000 3 How to register the member 62 1. Directions before using this product 3 Downloading Navi or OS 62 2. Components 6 What is V-Up Pro 3000 62 3. Description on product appearance 7 Specification 63 4. Installing product 9 A/S and Product Enquiry 64 Using VXA-3000 11 1. Basic functions of VXA-3000 11 A/S and Product Enquiry 64 2.
About VXA-3000 1. Directions before using this product Read thisŔUserœs Manualŕwithout fail before using this product to use this product safely. 1-1. Usage directions Warning Warning Warning Warning Refrain from operating the product. Please park a car at a safe place when operating the product, because there is danger of a traffic accident. Voice guide and map route can be different from the actual road condition.
About VXA-3000 1-2. Installation directions Warning Warning Warning Caution Connect the wires properly by referring toŔInstalling productŕsection. Otherwise, malfunction or accident may occur. Do not install the product in a position where driving can be interfered or driverœs field of vision can be blocked. Install the product in a position that does not interfere driving or safety devices like an air bag at the time of product installation and wiring.
About VXA-3000 1-3. Upgrade directions Ș Depending on the SD Card memory product, the SD Card memory sensing time may vary or sensing may fail. 1-4. Troubleshooting 1) Touching does not work If you cannot set touching in the Setup menu due to wrong touch setting, use the remote controller instead. Ș Press the [Initial Screen] button on the remote controller to open the main menu screen.
About VXA-3000 2.
About VXA-3000 3. Description on product appearance 3-1. Front/Right side ڤ ڥ ڦ ڧ ڨ ڡ ڣ ڢ Basic Operation ڡTOUCH SCREEN : Handles user touch input. ڢLED : Displays the product status. (Blue: Normal operation, Red: Malfunction) ڣREMOTE CONTROLLER BEAM RECEIVING UNIT : Receives the remote control signal. ڤAUDIO OUT : Output the audio signal to the external device. ڥAUDIO/VIDEO IN : Receives the A/V input from the external device like a DVD player.
About VXA-3000 3-2. Rear/Left side ڦ ڥ ڡ ڢ ڡDMB ANT ڢSPEAKER : Outputs 1 watt audio. ڣGPS ANT ڤDC 12V : Connects to the provided cigar jack. ڥPOWER SWITCH : Turns the power on/off.
About VXA-3000 4. Installing product 1) Fix the holder on the car dashboard where the driver feels comfortable. Caution Remove the foreign object from the holder fixing place so that the holder can be attached firmly. Then, fix it with screws to prevent falling down due to shock. Do not install the holder at the position that hampers driverœs vision or driving. Be careful not to interfere driving or the safety device like an air bag. GPS sensitivity will increase if you use the GPS pedestal.
About VXA-3000 3) Connect the power cable to DC 12V terminal located at the left side of the product and car cigar jack. Caution Use the car cigar jack that is included in the product package. If you use other cigar jack, the product may not work properly. 4) Remove the test jack from the Safety terminal and then, connect the cable to the hand brake. Caution Make sure connect the cable to the car hand brake to prevent operation while in motion.
Using VXA-3000 1. Basic functions of VXA-3000 1) Navigation function : Helps car navigation using GPS (Global Positioning System) engine and antenna, and electronic precision map. 2) Audio player function : Plays back MP3, WMA, WAV and OGG music files. 3) Video Player function : Plays back video files. 4) Image Viewer : GIF, JPEG and BITMAP image files. 5) Game function : Provides enjoyable games. 6) Aux function : Connects the DVD player manufactured by this company.
Using VXA-3000 2. Learning basic remote controller functions You can use frequently used function using the remote controller, as well as the touch screen for more convenient usage of VXA-3000. NAVI GAME ȯ : Controls screen brightness by 5 steps. ȯ : Mutes the sound temporarily. ȯ : Directly switches to the Navigation function. ȯ : Directly switches to the audio player function. ȯ : Directly switches to the initial screen.
Using VXA-3000 Ș : Selects the cursor that was moved by the direction key. Ș : Play back/Pause Audio or Video playback and show selected image in Image viewer mode. Ș : Moves audio or DVD playback section backward in Audio player/Aux mode. In Image viewer mode, shows previous image. : Moves audio or DVD playback section forward in Audio player/Aux mode. In Image viewer Ș mode, shows next image. Ș : Stop Audio , Video or DVD playback.
Using VXA-3000 3. Main menu Screen on/off The main menu is composed of Navigation, Audio Player, Video Player, Image Viewer, Game, AUX, Setting, Screen On/Off button and etc. 4. Quick Start This section will walk you through using your navigation unit for the first time, acquainting you with the basic operation of the navigation system. The functions and buttons not mentioned will be described in 5. DETAILED DESCRIPTION on page 19. Switch the unit on and tap on NAVI or NAVIGATION in the start screen.
Using VXA-3000 ҶSelect Navigate to set your destination. You have various ways to select your destination. The following page describes how to navigate to a specific address.
Using VXA-3000 4-1. Navigate to An address If you have the city and street address for your destination, simply enter it and the application will guide you directly there. ҶTap the Address icon. The address search screen with the keypad will now appear in the display: ҶSwitch between letter and number mode by pressing 123 or ABC. Switch between upper case and lower case by pressing ^. ҶIf at any point you want to Backspace and delete characters, press the backspace button <- on screen.
Using VXA-3000 ҶOn the street search screen you may enter the street name (at least three characters) and then press Next to go on. ҶNext, you may enter the number. Confirm and move to a list of matching address by pressing the Search button. NOTE If you have an imprecise address, such asūTimes Square, New YorkŬ, you can enter that as well, the only requirement is to enter some letters of the city name to begin your search. You can also enter a unique 7-digit postal code.
Using VXA-3000 4-2. Navigation Screen On the navigation map, the route will be shown in blue. The red arrow will indicate the direction of your next manoeuvre. A silver arrow will identify your current position. When you come up to a turn or other manoeuvre, you will hear a voice command at the appropriate time.
Using VXA-3000 5. Detailed Description 5-1. Settings ҶSwitch the unit on and tap on NAVI or NAVIGATION in the start screen. After a short period of time the main menu (Home) will appear. ҶChoose Language to select the language of your navigation system. ҶIf you have map data for different regions/cities on your memory card, tap on the name of the current region (e. g. London). All available maps on the memory card will be listed, and you can choose by simply tapping on the desired region.
Using VXA-3000 The window with the guidance options will be displayed: You can choose among the following options: Mode of transportation (fast car, slow car, pedestrian, etc.), fastest or shortest route, allow or avoid toll roads, motorways, and ferries. ҶTo switch between the modes just touch the icons. These will toggle so you can quickly see the activated settings. ҶWith Back you go back to the main menu.
Using VXA-3000 5-2. Rich Guidance Options ҶTouch the screen during guidance to open the navigation options. Here you can change all kind of settings, like adjusting volume, choosing night or day mode, saving your GPS position as bookmark, record your route (optional feature), look for latest traffic information (optional feature), choose an alternative route, change your destination to a Point of Interest (e. g. from a Guide), etc.
Using VXA-3000 Change settings Show Guidance Options Tap to Find Alternate Route Blocked Section/ Go back to Navigation screen Cancel Save Current GPS Position as Bookmark Navigate to nearby POIs 22 VXA-3000 Exit guidance
Using VXA-3000 5-3. Main Menu Contents The interface of the main menu is coherent throughout the whole navigation system. Via the main menu you may access all functions. ҶStart the navigation system by pressing NAVI or NAVIGATION in the start screen. After a short period of time the main menu will appear: If you want to start your route guidance straight away to your home address, press My Home. If no home address has been set, you are prompted to do so.
Using VXA-3000 Settings: Via Settings you may determine following options: Guidance: Mode of transportation (fast car, slow car, pedestrian, etc.), fastest or shortest route, allow or avoid toll roads, motorways, and ferries. Language: Here you may select other languages by tapping on them. Other Maps: If you have map data for different regions/cities on your memory card, tap on the name of the current region (e. g. London).
Using VXA-3000 POI: With the POI finder you can quickly find points of interest like petrol stations and restaurants that are chosen from a database of millions of POI, either nearby or at a remote location. With the Nearby option you will be presented a list of POIs near your current location. With At location you can look for POIs at a remote location, therefore you need to enter a city or postal code through Within the POI finder you will see the Guides, an optional and highly recommendable feature.
Using VXA-3000 ҶIn the POI finder, press on Guide and the guide list for the current region you are in will be opened. You may choose a guide item as destination, save it as bookmark or pinpoint the location. (See also HOW DO I USE GUIDES? on page 25.) Favorites Through Favorites you can access to, edit and delete your home and work positions, as well as your bookmarks. ҶVia Main Menu آFavorites آMy Home you can show your home position. The home position will be shown on a map.
Using VXA-3000 ҶVia Main Menu آFavorites آBookmarks you can show your bookmarks. Click on a bookmark to rename or delete it or to be routed directly to that location. GPS: At the bottom of the screen, your GPS status will be displayed all the time, showing the current street you are on and the number of satellites the GPS system is currently tracking. Exit: With Exit you quit the navigation system.
Using VXA-3000 5-4. How do i choose my Destination? You may choose your destination using your home address, the Address search, bookmarks, your work address, recently searched destinations, the map or looking for points of interest (e.g. through Guides). ҶPress Navigate in the main menu. The Choose destination menu opens: NOTE Please remember that the ways of setting a destination described in this section originate from the Choose destination menu.
Using VXA-3000 Address search Through the Address search you can perform a search by entering information about the desired target (street and town/city). You may then select a hit from the hit list and start navigating. You can also search for addresses if you want to plan a route with several stopovers. Alternatively, you may wish to pinpoint a specific location. ҶTo start this function, click on the Address icon. Ҷyou to the street search screen. NOTE You can also enter a unique 7-digit postal code.
Using VXA-3000 ҶTap on the City or P.C. field and enter your destination by tapping on the letters in the keypad (at least three characters). Instead of the city you may also enter the postal code. Confirm the city/postal code you have entered by pressing Search. On the following screen, choose the appropriate city from the list by tapping on it. This will move move you to the street search screen. NOTE You can also enter a unique 7-digit postal code. In that case, you do not need to enter a street name.
Using VXA-3000 Bookmarks The bookmarks list contains the destinations you have saved as favorites (from the Guides, from your Address search, etc.). There is no need to perform repeated searches for those destinations. ҶPress the Bookmarks icon. ҶUse the Up and Down arrows to scroll up and down in the list. Select an item by clicking on it. ҶIf you want to rename or delete a bookmark, please see Favorites on page 26.
Using VXA-3000 My Work ҶBy pressing My Work you will be guided directly to your workplace (or another frequently visited location of your choice). NOTE If no work address has been set, you are prompted to do so. If you want to change an existing home address, see Favorites on page 26. Recent ҶBy pressing Recent a list with the recently visited and searched destinations will be opened. Map Via Map you can move on the map of the surrounding area and select items for guidance.
Using VXA-3000 POI You may also select a destination via the POI (points of interest) finder. Here you may choose POIs Basic Operation that are either nearby or at a remote location. You may also browse a Guide.
Using VXA-3000 5-5. How can i plan my route? Using the route planning functions you may plan your route with multiple stopovers along your journey. ҶTo start this function select Plan Route in the main menu. The Destination List will be displayed: ҶBy pressing the + icon you can add a stopover. You will switch to the Choose stopover screen, which looks the same as the Choose destination screen and is exactly the same to use.
Using VXA-3000 Once you have added stopovers (with the + Icon) and returned to the Destination List, you have several options: ҶWith the + icon you can add more stopovers. ҶSelect a stopover and then use the Up and Down arrows to change the order of the stopovers. ҶWith the Trashcan icon you can delete a selected stopover. ҶVia Menu you may start following functions: ҶWith Simulate you can simulate the route to come.
Using VXA-3000 5-6. How do i select addresses on the map? The Map (General Map) not only shows roads and squares, but also points of interest such as restaurants, cultural attractions, parking garages, etc. ҶTo start this function press the Map icon in the main menu.
Using VXA-3000 ҶWith the Compass icon (in the bottom left hand corner) you may adjust you orientation. ҶBy pressing Menu, you can access to further options, like saving the actual location as a bookmark, moving to the actual GPS position, navigating to the selected location, searching an address, and accessing to a bookmark or point of interest. Info Layers You can define the complexity of the map by choosing the elements (locations) that will be shown in it.
Using VXA-3000 5-7. Optional Features The following features are optionally available for your navigation system: ҶCity Guides ҶRoute Recording ҶTraffic Information System (TMC) ҶSpeed Camera Alert HOW DO I USE GUIDES? Guides are an optional feature and may be purchased at: ENTER URL HERE City Guides, available at ENTER URL HERE, contain lots of valuable information to enhance your experience, such as descriptions, contact information, prices, opening times, etc. ҶSelect POI in the Main Manu, then Guide.
Using VXA-3000 The guide list will appear: ҶSelect the guide you wish to use by clicking on it. Basic Operation The Categories tab of the chosen guide will be displayed: You can now browse the guide by categories or search the guide.
Using VXA-3000 Browse by categories: ҶUnder Categories you may select from the different categories of the Guide (e.g. restaurants, hotels, bars, museums etc.). ҶUse the Up and Down arrows to scroll in the list. Some Guides also offer subcategories. ҶBy clicking on a category or subcategory the system will search for relevant items. The hit list will display the search results, ordered by distance. You may select a found item directly for guidance.
Using VXA-3000 ҶEnter a search term (at least three characters) and confirm with Search. The hit list will be displayed: ҶSelect an entry by tapping on it. ҶGet detailed information about the selected location via Detail. Basic Operation ҶExplore the locationŪ s surroundings via Map. ҶYou may use this item for the guidance by pressing Navi. ҶVia Save you may save the item as a bookmark.
Using VXA-3000 5-8. How do i use the speed camera alert? If the Speed Camera function has been activated (via Main Menu آSettings آGuidance آ Speed Cam Warnings On), Speed cameras can be displayed during navigation mode or tracking mode. In the event that Speed cameras are located on your journey a warning will be received. For each camera you will receive two alerts. Each alert consists of an audible beep and a message displayed on screen telling you the camera type and distance from it.
Using VXA-3000 6. Setup Assistant With the Setup Assistant you can choose and save your map and guide data on a memory card for use with a supported handheld device. The Setup Assistant installs those data on the memory card, together with the program files of your navigation software and the voice files for guidance. ҶPlace the supplied CD or DVD in the CD/DVD slot of your computer. ҶThe Setup Assistant will pop up automatically. Select the language of the installation program, and press OK.
Using VXA-3000 The following regions (states in brackets) are available: Northeast: (ME, NH, VT, MA, RI, CT, NY, NJ, PA, WV, VA, DC, DE, MD) Southeast: (NC, SC, TN, GA, AL, MS, FL, AR) Upper Midwest: (MN, WI, IL, IN, OH, MI, KY) Great Plains: (MT, WY, CO, ND, SD, NE, KS, IA, MO) Southwest: (NM, TX, OK, AR, LA) West: (CA, NV, OR, WA, ID, MT, UT, AR) ҶYou are prompted to insert your memory card into your card reader.
Using VXA-3000 7. Frequently asked questions I can«t find an address. Please make sure you have correctly spelled your entry. If you do not know how an address is spelled correctly, simply enter the parts of the address, you know for sure (e.g.ūLondŬ,ūLeicŬfor Leicester Square in London). Then browse in the result list and look for the address. Also make sure that the city in which you are looking for an address is correct. Sometimes the official postal address differs from the address you are looking for.
Using VXA-3000 8. Audio player You can play back music by selecting Audio player in the main menu. Basic functions include Play, Pause, Stop, Select Next, and Select Previous. Playback function includes Repeat, Repeat Selected, and Random. The supported music file formats are MP3, WMA, WAV, and OGG. You can save music files in the SD Card memory. The Audio player manages the music file by the unit of a folder. To play back music using the SD Card memory.
Using VXA-3000 8-1. Basic screen ڤ ڣ ڢڡ ڥ ڦ ڧ ڨ ک ڸIndicator of SD Card memory : If connected SD Card memory, this icon change to Blue color. ڹFile list : Show folders and files that Audio player can playback. Basic Operation ںVolume control : Increase or decrease volume. ڻExit : Close Audio player and back to Main menu. ڼPrevious file playback : Playback previous music file. ڽPlay/Pause : Playback and Pause music. ھStop : Stop the music playback.
Using VXA-3000 8-2. File list screen ڤ ڡ ڢ ڥ ڣ By touching folder tap()ڸ, Audio player show folders which playable music files are in. At the folder list view, you can see the list of files by selecting File tap()ڹ. You can listen to music file highlighted by cursor using Playback button()ں. Touching Back button()ڻ, you can return to basic screen of Audio player. You can select file to play by scroll bar()ڼ.
Using VXA-3000 9. Video Player You can play back movie by selecting Video Player in the main menu. Basic functions include Play, Pause and Stop. The supported movie file formats areūAVI, MPG, MPEG, WMV, MP4, ASF, TSŬ. You can save video files in the SD Card memory. The Video player manages the movie file by the unit of folder. 9-1. Basic Screen ڣ ک ڢڡ ڤ ڥ ڦ ڸSD Card indication icon : If SD Card memory is inserted, icon is changed to Blue color.
Using VXA-3000 9-2. Full Screen 9-3. Volume Control Screen 9-3. Volume Control Screen Movie player scan all playable movie files stored in the SD Card memory and show its result.
Using VXA-3000 After select folder, if you touch File tap, you can see all playable movie files. Caution While movie player is operating, if you remove the SD Card memory, system will be get into unstable situation. Please donŪt remove SD Card memory during playback. If system is Basic Operation unstable because SD Card memory is removed, turn off the system and rebooting.
Using VXA-3000 10. Image Viewer You can see image by selecting Image Viewer in the main menu. Basic functions include Previous view, Next view, Set image to original size, Fit image to viewer, Zoon in, Zoom out, Rotate left, Rotate right, Full screen, List of image files. The supported image file formats areūWAV, WMA, MP3 and OGGŬ. You can save image files in the SD Card memory. The Image viewer manages the image file. 10-1. Image Viewer main screen.
Using VXA-3000 10-2. Full Screen You can see the full screen image by selecting Full screen button. 10-3. File list screen ڤ ڢ ڥ ڣ You can see file list screen by touching the File list button. Touching the tap of folder()ڸ, image viewer show all folders have supportable image files in SD Card memory. When Folder tap is enabled, you can see image files of selected folder by touching File tap()ڹ. By touching the Image view button()ں, you can see the highlighted image file by cursor.
Using VXA-3000 11. Game Select the Game in the main menu. How to play : If you put more than three same items vertically or horizontally, these items will disappear. To get higher score, remove as many items as possible at a time. Normal mode : The game will be over if nothing can be moved any more. (If you cannot put more than three same items in any direction.) If the bar at the right side is filled, the next level will be started.
Using VXA-3000 12. Aux You can use the simple line-in function if you set A/V input asũOthersŪnot VXM or VXD. Default value isũOthersŪ. ڡ ڢ ڣ ڤ As shown by the above figure, only volume control and screen setting are supported inũOthersŪ mode. DVD player control is not supported. Basic Operation ڸContrast : Controls contrast within the range of 0 ~ 16 stages. ڹChroma : Controls chroma within the range of 0 ~ 16 stages. ںDimmer : Controls brightness within the range of 1 ~ 5 stages.
Using VXA-3000 If you select VXM or VXD as A/V input in setup menu, you can operation the DVD player manufactured by this company. You can also use the remote controller to use the following functions. ڡ ڢ ګ ڣ ڤ ڦ ڨ ڥ ڧ ک ڪ ڸPower : Power on or off the DVD player. ڹSD : If the icon appears, the device detects the SD memory. ںVolume : Controls sound volume of the DVD player. ڻPlay/Pause : Starts or pauses the DVD player. ڼStop : Stops the DVD player.
Using VXA-3000 The following screen will appear if you press the setting icon. ڡ ڢ ڣ ڸContrast: Controls contrast within the range of 0 ~ 16 stages. ڹChroma : Controls chroma within the range of 0 ~ 16 stages. ںDimmer: Controls brightness within the range of 1 ~ 5 stages. The below figure shows the screen when you press the DVD title icon. You can move the DVD Title Basic Operation cursor using the direction key. ڡ ڢ ڸDirection key: Moves the DVD Title cursor.
Using VXA-3000 13. Setup You can change many settings if you select Setup in the main menu. 13-1. Main Theme Change main theme of GUI (Graphic User Interface) 13-2. Slide show If no input is made longer than one minute in the main menu, specified images will be displayed sequentially. You can select one of Off, 10 seconds, 30 seconds, 60 seconds and 5 minutes, which means the time interval of image changing when the slide show is started.
Using VXA-3000 13-5. A/V Input If you select the VXM or VXD, you can control the DVD player using this device, when the DVD player manufactured by this company(VXM and VXD series) is connected. To connect other manufacturerŪ s product, set toūOthersŬ. Default isūOthersŬ. 13-6. Upgrade Upgrade using SD Card memory - You can upgrade the OS using SD Card memory. To download OS from the web site(http://www.plenio.co.kr) down to SD Card memory using V-up pro 3000, you have to register in the web site.
Using VXA-3000 4) When upgrade is complete, turn the power off and on. 13-7. Dimmer You can select 5 level of screen brightness.
Using VXA-3000 13-8. Touch Calibration Selecting this menu to increase accuracy of the touch screen. For touch setting, press the center of the cross symbol. Then, the cross symbol will appear at the Basic Operation center, left upper side, left bottom side, right bottom side and right upper side one by one. To complete touch setting, press the center of the cross symbol for 5 times in total.
Upgrading VXA-2000 How to register the member 1. Connect to eh Plenio web site (http://www.plenio.co.kr). 2. Create your user ID and password by entering the customer information and product number in the Subscribe menu. 3. If you input user ID and password correctly, you can download the latest information related with upgrade. Downloading Navi or OS You can download V-up pro 3000 and various download files from the Customer Support section of Plenio web site.
Specification Specification Item Details OS MS WINDOWS CE.NET 4.
A/S and Product Enquiry A/S and Product Enquiry The product warranty period is calculated from the date of product purchase. Therefore, make sure to write down the purchase data for proper after service. [If the product purchase date cannot be known, the product warranty period will start 3 months from the manufacturing date or import customs clearance date.
U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER Customer service and complaint reporting You can make an enquiry or ask advice about the product through a phone call or in the web site. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation.
DECLARATION OF CONFORMITY COMPANY NAME DVS KOREA 7th & 8th Fl.
MEMO VXA-3000 67
MEMO 68 VXA-3000
MEMO VXA-3000 69