Specification

Actuator plate A1, for toilet, plasticActuator plate A1, for toilet, plastic DimensionDimension WeightWeight Order numberOrder number
mechanical actuation, for surface mounted installation, dual
flush, mounting frame, mounting hardware included, push rods,
front plate plastic
ColorsColors
01 White 02 Polished Chrome 03 Black Matte
VariantVariant
White, ADA compliant 8 1/2" x 5 3/4" Inch 0.7 lb WD5008..1090
ADA compliant, Polished Chrome 8 1/2" x 5 3/4" Inch 0.7 lb WD5008..1090
Black Matte, ADA compliant 8 1/2" x 5 3/4" Inch 0.7 lb WD5008..1090
Suitable productsSuitable products
Toilet in-wall tank & carrier, Standard WaterSense® listed, For
2"x4" and 2"x6" wall installation, for toilets with a projection of
<= 24 5/8", adjustable feet 0" - 9 1/2", SensoWash ready,
mechanical front flush actuation, includes in-wall tank, marking
of filling height, dual flush, insulated against condensation,
Scope of delivery, HDPE wall-mounted toilet connection bend
DN 90/90, PE wall-mounted toilet connection set DN 90, wall-
mounted mounting rods M12, mounting hardware included, 2
bolt caps, cUPC® listed*, Load capacity = 880 lbs
23 1/4" x 45 1/4" Inch 35.3 lb WD1022
All drawings contain the necessary measurements which are subject to standard tolerances. They are stated in inch & mm and are non-
binding. Exact measurements, in particular for customized installation scenarios, can only be taken from the finished ceramic piece.
DuraSystem® Actuator plate A1, for toilet, plastic #
WD5008..1090 / WD5008..1090 / WD5008..1090
|< 8 1/2" Inch >|