Instructions / Assembly

Toilet in-wall tank & carrier, StandardToilet in-wall tank & carrier, Standard DimensionDimension WeightWeight Order numberOrder number
WaterSense® listed, For 2"x4" and 2"x6" wall installation, for
toilets with a projection of <= 24 5/8", adjustable feet 0" - 9
1/2", SensoWash ready, mechanical front flush actuation,
includes in-wall tank, marking of filling height, dual flush,
insulated against condensation, Scope of delivery, HDPE wall-
mounted toilet connection bend DN 90/90, PE wall-mounted
toilet connection set DN 90, wall-mounted mounting rods M12,
mounting hardware included, 2 bolt caps, cUPC® listed*, Load
capacity = 880 lbs
ColorsColors
00 White
VariantVariant
1.6/0.8 gpf, ADA compliant 23 1/4" x 45 1/4" Inch 35.3 lb WD1022000090
1.28/0.8 gpf, ADA compliant 23 1/4" x 45 1/4" Inch 35.3 lb WD1022000091
InfoboxInfobox
* # WD1022: Complies with the following standards: ASME A112.6.2, ASSE 1002, ASME A112.1002/CSA B125.12 &
ASME A112.19.5/CSA B45.15
Installation accessoriesInstallation accessories
Pre-installation set in combination with SensoWash, for in-wall
carrier with horizontal support without shower toilet pre-
installation/condiut pipe
005072
Suitable productsSuitable products
Actuator plate A1, for toilet, plastic mechanical actuation, for
surface mounted installation, dual flush, mounting frame,
mounting hardware included, push rods, front plate plastic
8 1/2" x 5 3/4" Inch 0.7 lb WD5008
All drawings contain the necessary measurements which are subject to standard tolerances. They are stated in inch & mm and are non-
binding. Exact measurements, in particular for customized installation scenarios, can only be taken from the finished ceramic piece.
DuraSystem® Toilet in-wall tank & carrier, Standard #
WD1022000090 / WD1022000091
|< 23 1/4" Inch >|