Specification Sheet

Toilet wall-mountedToilet wall-mounted DimensionDimension WeightWeight Order numberOrder number

washdown model, cUPC® listed*

ColorsColors

00 White 20 HygieneGlaze (an antibacterial ceramic glaze that

provides almost indefinite effectiveness)

VariantVariant

InfoboxInfobox

* Complies with following standards: ASME A112.19.2/CSA B45.1 and ASME A112.19.14, In-wall tank & carrier and

actuator plate required for installation / Refer to page XXX, Wall-mounted toilet is ADA compliant, when installed

with a seat height of 17" - 19" from the finished floor

Sigma 01 flush plate, dual flush for toilets, White 9 5/8" x 6 1/2" Inch 115770

Geberit carrier for toilets 19 3/4" x 3 1/8" Inch 37.5 lb 111798

Geberit in-wall tank and carrier for toilets, width 19 3/4", depth

5 1/2", height (adjustable) 43" - 47"

19 3/4" x 5 1/2" Inch 40.8 lb 111335

Noise reduction gasket for wall-mounted toilet 0.7 lb 005020

Suitable productsSuitable products

Toilet seat and cover hinges plastic, with slow close, 006739

All drawings contain the necessary measurements which are subject to standard tolerances. They are stated in inch & mm and are non-

binding. Exact measurements, in particular for customized installation scenarios, can only be taken from the finished ceramic piece.

D-Code Toilet wall-mounted Ÿ # 253509..922

|< 14" Inch >|