Installation Instructions

PRODUCT: POWERCHECK
TM
Models No.: PC3-10, PC3-20
1. FCC ID: 2AMUD-K1
2. IC: 23564-K1
NOTES AND USAGE TIPS
1. Use only one (1) Duracell Sensor in each device.
2. For devices with multiple batteries, place one sensor on a single battery, preferably the battery that is most
accessible.
3. Attach the Duracell Sensor to the battery with the (+) and (-) ends oriented correctly.
4. Duracell Sensors will not fit in all devices. Do not try to force a battery with a Duracell Sensor into a device
battery cavity or force the device’s battery cavity door close. Either action could permanently damage the
sensor and/or your device. You can try to rotate the battery with a Duracell Sensor, slightly left or right for
a better device cavity fit. See the attached list of devices where Duracell Sensors are known not to fit.
5. Duracell Sensors are not compatible with all Duracell batteries or any other battery brand.
6. Use AA Duracell Sensors only with specified Duracell AA batteries.
7. Ensure all batteries are replaced with new batteries in the device at the same time to ensure proper power
indication.
8. The power indication reading given by the Duracell App is an approximation of remaining power of the
battery and is dependent upon the electronic device, the device load, the device endpoint voltage, the device
usage patterns and appropriate device icon selection in the app.
9. Within the Duracell App, the correct device icon choice is important to ensure a proper power indication
estimate.
10. Battery power estimates will be less accurate if the battery is tested while the device is in use. Power levels
are more accurate when the device is not in use for at least 6 hours.
11. Duracell Sensors will not function in devices made mostly or entirely of metal.
12. The Duracell App is compatible with Apple iOS phone models 5s or greater and must have the iOS
11.0 mobile operating system or higher version.
13. Duracell Sensors work via Bluetooth Low Energy radio communication and will communicate with your
Smart phone within a maximum direct line range of 100 ft. The range in homes and buildings may be less
depending on the building structure and materials of construction.
14. The Duracell App can be used when away from the device. The power level depicted for each device will be
the most recent battery power estimate when the app was last open and within range of the device.
15. Duracell Sensors are reusable and can be used in different devices.
16. Please contact support via the app should you run into any issues with your account or the app in general, or you
can Email: [e-mail] or call 877-9-HELPNOW.