WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
PRECAUTION Follow the advice below for safe and appropriate operation. ON PLACEMENT • Do not use the unit in places which are extremely hot, cold, dusty, or humid. • Place the unit on a flat and even surface. • Do not restrict the air flow through the ventilation slots by placing the unit on soft furnishings, by covering the unit with a cloth or by placing the unit on a carpet.
SYSTEM CONNECTIONS IMPORTANT Switch off the power before connecting speakers and other equipment. SPEAKERS TERMINALS IMPEDANCE: SPEAKER CORD CONNECTION Connect the black wires to the black (-) terminals and the other color (white, red & brown) to the red (+) terminals. NOTE: Connecting speakers other than the speakers supplied with the unit, may damage the unit. POWER CORD CONNECTION 1. Make sure that all the components and speakers are connected correctly. 2.
PARTS IDENTIFICATIONS 1 22 21 20 19 2 3 18 17 16 4 5 6 7 8 9 15 14 10 13 11 12 1) CD door 12) CD storage 2) STEREO WIDE indicator 13) STEREO WIDE button STANDBY button 3) POWER / 14) BAND button 4) VOLUME control buttons 15) DISC SKIP button 5) RANDOM / TUNING / REPEAT buttons 16) 6) REMOTE SENSOR 17) 7) DISPLAY window 18) 8) FM MODE (STEREO / MONO) 19) 9) PHONES jack 20) MEMORY/ 10) FUNCTION button (TUNER / CD / AUX) 21) SLEEP button 11) X-BASS WOOFER button 2
DISPLAY 1 TRACK CH 2 34 5 6 TUNER AUX TIMER ONOFF CD SLEEP AM PM 7 8 9 10 11 X-BASS AM FM MW kHz MHz 17 MEMORY RANDOM REPEAT STEREO ONE ALL DISC 4 5 1 2 3 12 13 14 15 16 11. Pause indicator. 12. MEMORY indicator. 13. RANDOM indicator. 14. Indicators to show which disc holder of the disc tray is occupied. If a certain disc holder is empty, the corresponding number indicator will be off. 15. REPEAT mode indicators. 16. CLOCK/CD TIMING/BROADCAST STATION display. 17. Track number. 1.
ADJUSTING THE SOUND TO ADJUST THE VOLUME Press the VOLUME / buttons to adjust the sound. TO USE THE X-BASS WOOFER Press the X-BASS WOOFER button to adjust the bass. X-BASS STEREO G TUNIN T TUNING UP REPEA To decrease the volume press here. DOWN RANDO M VOL UP To increase the volume press here. VOL X-BASS The display will show: T R A CK DOWN X-BASS is designed specifically to boost the low frequency sound to obtain a more powerful bass.
SETTING THE CLOCK To set the current time (Select POWER STANDBY mode) 1. Press the MEMORY/ mode. Hours flash. CLOCK button in clock 2. / Press the hour. (SKIP) button repeatedly to set current SK DO W CLOCK button to 3. Press the MEMORY/ make the correct minutes flash. 4. Press the MEMORY/ MEMORY CLOCK S IP • SEARCH • PR IP • ES ET (SKIP) buttons to set the minutes and press CLOCK button to start the clock.
SETTING THE SLEEP TIMER 2. Press and hold the SLEEP button to select the length of remaining time until the unit turns off. It changes the indicator in the following way: 1. Press the SLEEP button while the power is on. "SLEEP 90" lights in the display. SLE EP SLEEP 90 SLEEP 80 SLEEP 10 ......SLEEP 20 The Sleep Timer is set and the SLEEP indicator lights in the display. Let go when required sleep time (in minutes) is shown.
FOR BETTER RECEPTION FM AM/MW Fully unwind the wire antenna. Then extend the wire antenna and place it in the position that sounds best. NOTE: Do not connect to outside antenna. Connect the loop aerial (provided) to the 'AM/MW LOOP ANTENNA' snap terminals at the back of the unit. Position the aerial for the best reception. MANUAL TUNING The system can store a total of 40 stations. (Each band has a maximum of 20 available preset stations). Presetting allows you to tune into a station directly.
TUNING INTO A PRESET STATION 1. Press the FUNCTION button to TUNER. 2. Press the BAND button to select the a band. 3. Press the PRESET buttons to preset number. BAND SK N S IP • EARCH • P RE SE T UP DO W FUNCTION The contents (preset channel number, frequency and frequency band) which have been stored in memory will appear on the display in numerical order, irrespective of the frequency bands. - 11 - 2775SW-eng.
COMPACT DISC PLAYBACK 1. Press the FUNCTION button to CD. 2. Press the OPEN/CLOSE button to open the disc tray. SE FUNCTION OPE T RA C K 3. Place the first disc onto the disc holder, with the label side up. WARNING: • Before transporting the unit, take out all discs from CD tray. N/ CL O 4. Press the DISC SKIP button to revolve the tray clockwise. Place other disc(s) on the disc holder(s). DI SC SK IP 5. Press the OPEN/CLOSE button to close the tray.
COMPACT DISC PLAYBACK (CONTINUED) Notes: 1. During playback, disc tray can be opened to change/add disc, but DISC SKIP button will become invalid and the current disc playback will not be interrupted. 2. The / SKIP buttons can only be used to choose a track of the current disc. To choose a track of another disc, DISC SKIP button should be pressed to get to the desired disc first. 3. Before transporting the unit, take out all discs from the CD tray.
COMPACT DISC PLAYBACK (CONTINUED) SHUFFLE PLAY - PLAYING IN A RANDOM ORDER IN STOP MODE SC SK IP G TUNIN DI 2. Press the RANDOM button, the word "RANDOM" will appear on the display. DOWN RANDO M 1. Press the DISC SKIP button to select a disc. T RA C K PLAY/PAUSE button. Some abnormal symbols will be shown on the display and a short period of time is 3. Press needed for track shuffling, before playback can be started. PLAY/ PAUSE RANDOM T RA C K Notes: 1.
COMPACT DISC PLAYBACK (CONTINUED) REPEAT PLAYBACK DURING PLAYBACK MODE T TUNING UP REPEA T R AC K To Repeat the Current Track • Press the REPEAT button until REPEAT ONE appears on the display and the currently playing track will be played repeatedly until the STOP button is pressed. • SKIP and SEARCH can still be used during this function.
COMPACT DISC PROGRAMMED PLAYBACK A program of up to 32 tracks from all the available discs in the disc tray can be played in a preset order. 1. Press the MEMORY/ CLOCK button (in stop mode). 2. Press the DISC SKIP button to select the desired disc (the disc symbol ( ) shows which disc is selected). MEMORY CLOCK DI SC SK IP M EM O RY M EM O RY T RA C K 3. Press the track.
STOPPING AND CANCELLING PROGRAMMED PLAYBACK To stop programmed play for a moment: • Press the PLAY/PAUSE button and " " will be displayed. Press this button again to resume playing. PLAY/ PAUSE T RA C K STOP To add additional tracks during program playback: • Press the STOP button once, press the MEMORY/ CLOCK button until the track indication is "--" and then repeat steps 2 to 4 (Compact Disc Programmed Playback) on page 17. T RA C K Also By pressing the FUNCTION button to select other functions.
REMOTE CONTROL 1. 2. 3. 4. 5. POWER/STANDBY button SOUND button TIMER button STOP button / SKIP buttons / PRESET -/+ buttons 6. MEM button 7. TUNING /RANDOM button 8. SLEEP button 9. VOLUME +/- buttons 10. FUNCTION button 11. BAND button 12. X-BASS button 13. PLAY/PAUSE button 14. TUNING /REPEAT buttons OPEN/CLOSE button 15. 16. DISC SKIP button USING THE REMOTE CONTROL CORRECTLY • • • Point the Remote Control at the REMOTE SENSOR located on the unit.
MAINTENANCE CLEANING CD If the CD skips or will not play, the disc may need cleaning. Before playing, wipe the disc from the centre out with a cleaning cloth. After playing, store the disc in its case. CLEANING THE UNIT Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft cloth. IMPORTANT NOTE Before transporting the unit, take out all discs from the CD tray. TROUBLESHOOTING GUIDE CAUSE (AND REMEDY) SYMPTOM GENERAL No sound.