Installation Guide

1) CHECK YOUR PANEL SIZE TO ENSURE A PROPER FIT: REQUIRES 10 IN. OF VERTICAL
SPACE ON DOOR PANELS FOR MINIMUM SPACING, CHECK YOUR GARAGE DOOR
PANELS TO ENSURE A PROPER FIT
2) MUST BE INSTALLED ON A STEEL OR STEEL ALLOY GARAGE DOOR
3) USE THE INCLUDED MAGNETIC RULER TO HELP PLACE AND ALIGN MAGNETS
BEFORE YOU START
1) Clean the surface of your garage door panels where you will apply the magnets
2) Using the included Magnetic Ruler, follow the guidelines below for your window
style
Important notes
1) On a standard 12” x 16” traditional raised panel garage
door, use the included ruler to place each magnet 1”
from the inner panel edge and leave 2” between
each magnet.
2) Feel free to adjust the spacing between each magnet to
what looks best for your home. Another option is to use
a 1.5” outside border and to space the magnets 1” apart.
frequently asked questions
Q: Do they reflect like windows?
A: No, reflective coatings make it easier to tell these are not actually windows.
Our magnets are matte black intentionally.
Q: Will they fit on my garage door?
A: Your door panels MUST be at least 10” tall to provide the minimum spacing required
.
Questions / concerns?
[e-mail]
www.duralifthardware.com
installatioN
instructions
APPLYING windowS
1” 1”
1”
2”
2”
6”
6”
4”
4”
1”