mPOS Product specification DUALi Inc. Document Version: 1.00 Last Revised Date: 07th SEP. 2016 Copyright ⓒ 2014 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc.
mPOS Specification DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. DUALi provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products.
mPOS Specification Revision History 2016.09.07 (Ver. 1.
mPOS Specification CONTENTS 1 2 3 4 5 INTRODUCTION ...................................................................................................................................... 5 1.1 PRODUCT 1.2 CONTACT IC CARD READER 사양 ....................................................................................................... 5 SPECIFICATION .................................................................................................................... 5 STRUCTURE .....................
mPOS Specification 1 Introduction mPOS is Contact EMV Level 1 and RF EMV Level1, MSR support device. 128x64 Use oled(128x64) provides information to the user. There is a KEYPAD for the key input, the state information from the user can be transmitted at the BuzzerUsing the battery is capable of charging the product. To connect the charging and discharging or USB cable, AF does not work.RF ON when the power is always transmitted. 1.
mPOS Specification 2 Structure 2.1 Components Confirmation - mPOS 1EA 2.2 Description 1) MAIN Board (mPOS MAIN) - MAX32550 : Cortex M3 with 1MB flash and 256K+8K SRAM - Secure SRAM : Internal 8KB SRAM - EMV L1 Module : EMV L1 certification - Host Communication : (FTDI UART) - MSR Header : 2 Track MSR header - Buzzer : Tone controllable buzzer - Battery : Li-polymer, 560mAh - LCD : 128X64 DOT, OLED, 0.
mPOS Specification 3 Exterior 3.1 Product exterior 3.
mPOS Specification 4 Power & Interface Specification 4.1 Power Specification - Battery 3.7V(560mA), USB 5V(Charge) - Power usage: under 2W 4.2 Current consumption - Default : 5V, under 200mA - MAX : 5V, under 300mA (card read/write) 4.
mPOS Specification 5 Functions 5.1 Operation - Temperature: -10 ~ 60 ℃ - Humidity : 30 ~ 90 % (relative humidity) 5.
mPOS Specification 6 Warning and Notice - For indoor use only. - This product is affected by an element like metal or Magnetism. So one has to take precautions. - This device is not waterproof. - Recommended to use apart from metallic devices to maximize RF reading performance.
mPOS Specification 7 Warranty & Service ‣ Warranty and Repair service - DUALi Inc. warrants to the original consumer or other end user that this product, DE-631, is free from defects in materials and workmanship for a period of 1 year from the date of purchase. ※ Note Warranty/non-warranty repair fees do not include any shipping charges. ‣ The damages(defaults) prescribed below are NOT to be covered by warranty. - User’s misuse of part/component.
mPOS Specification 8 Certifications 9 FCC STATEMENT 10 CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 11 12 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.