DE-ABCM-DC User Manual DUALi Inc. Document Version: 1.04 Last Revised Date:21st OCT. 2013 Copyright ⓒ 2009 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc.
DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. DUALi provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products. Therefore, DUALi assumes no liability and is not responsible for customer applications or software design or performance relating to systems or applications incorporating DUALi products.
DE-ABCM User Manual Revision History ■ 2009.04.09 : Issued first ■ 2011.07.18 : Add PCB dimension ■ 2011.08.08 : Add SAM card connectors’ specification ■ 2011.12.22 : Add metal shield cover (change product photo) ■ 2013.10.21 : Add capacitor(C41, 100nF) on nRESET line to improve stability. ■ 2015.01.28 : Add 5V, 3V, 1.8V smart card supply Version. 1.04 3 DUALi Inc. (http://www.duali.
DE-ABCM User Manual Contents 1 Summary .................................................................................................................................. 5 2 Structure................................................................................................................................... 5 3 4 5 6 7 8 2.1 The Structure of equipment ............................................................................................. 5 2.2 The block diagram of main Module ....
DE-ABCM User Manual 1 Summary Smart Card Interface Contactless Smart Card (ISO 14443 A/B) 2 SAM CARD (ISO7816, T=0,T=1, 5 V, 3 V, 1.8 V) Host Interface USB 2.0 Full Speed (12Mbps), also support USB 1.
DE-ABCM User Manual - 2.2 The block diagram of main Module 2.3 Description of main Module CPU : 32bit RISC CPU, It is STM32F103 which is ARM-based 32-bit MCU with Flash, USB, CAN, seven 16-bit timers. This CPU has 64Kbyte Flash memory, 20Kbyte SRAM, 2 UART, USB 2.0 interface. - PN512 RF IC : This Philips IC can control RF card like MIFARE card, type A/B card and FeliCa card simultaneously. - USB Connector : It’s a Communication part for USB communication.
DE-ABCM User Manual 3 Description of Surface 3.1 The picture of device surface There are no parts at bottom. But there is a space for optional LEDs. 3.2 Version. 1.04 The size of equipment surface - DE-ABCM : 70(W) * 45(L) * 8(H)mm - Thickness (PCB) : 1.6T 7 DUALi Inc. (http://www.duali.
DE-ABCM User Manual 4 Connector pin assignment 4.1 USB Connector [J2] (4Pin 2.0mm) -> PC USB Port Pin No. Description 1 VCC(DC5V) 2 USB D+ 3 USB D- 4 GND 4.2 SAM1 Connector [J9] (SAM Socket, TM6090-06-G) -> SAM Pin No. Description 1 VCC 2 RESET 3 CLOCK 4 GND 5 NC 6 IO It is for ISO-7816 IC Card(SAM) Communication. 4.3 Header for IC CARD Connector and IC CARD Detection [J8] (6Pin 2.54mm, Box Header 2*3) -> IC CARD Connector Pin No. Description Pin No.
DE-ABCM User Manual 3 RxD(RS-232 or TTL) 4 GND 5 SAM2 Detection 5 Description of electricity 5.1 The Description of power - 5.2 Input power : 5V (USB Bus Powered) The using electric current - Normal 5V, 150 mA under - MAX 5.3 5V, 200 mA under The Description of USB communication - USB V2.0 FULL SPEED (12Mbps) 6 Description of Function 6.1 Protocol Specification Refer to protocol specification for detail function.(provide on request) 6.
DE-ABCM User Manual 8 Warning and Notice - For indoor use only. - This product is affected by an element like metal or Magnetism. So one has to take precautions. - Version. 1.04 This device is not waterproof. 10 DUALi Inc. (http://www.duali.
DE-ABCM User Manual Warranty & Service ‣ Warranty and Repair service - DUALi Inc. warrants to the original consumer or other end user that this product, DE-ABCM-DC, is free from defects in materials and workmanship for a period of 1 year from the date of purchase. ※ Note Warranty/non-warranty repair fees do not include any shipping charges. ‣ The damages(defaults) prescribed below are NOT to be covered by warranty. - User’s misuse of part/component.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
OEM Installation Instructions In order to maintain compliance with FCC, Industry Canada, and any other applicable regulations, it is required of the OEM or module level customer to adhere to the guidelines listed in this manual. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed.
module”, or the word “Contains”, or similar wording expressing the same meaning, as follows: Contains transmitter module IC: 9445A-DEABCMDC is the module’s certification number. The applicant for equipment certification of the module shall provide with each unit of the module either a label such as described above, or an explanation and instructions to the user as to the host device labelling requirements. Industry Canada statement This device complies with Industry Canada licence-exempt RSS standard(s).
1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this equipment near water. 6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce heat. European CE notice to users and product statements This product is CE marked according to the provisions of the R&TTE Directive(99/5/EC). Hereby, DUALi Inc.
EUROPEAN UNION “DECLARATION OF CONFORMITY” DECLARATION OF CONFORMITY DUALi Inc. 1-309 Innoplex, 306 Sinwon-ro, Yeongtong-gu, Suwon, Gyeonggi-do, Korea declare under our sole responsibility that the product(s) Smart Card Reader to which this declaration relate(s) is in conformance with the following standards: EN 301 489-1 V1.9.2 :2011 EN 301 489-3 V1.6.1 :2013 EN60950-1 :2006 EN 300 330-1 V1.8.1 :2014 EN 300 330-2 V1.6.1 :2014 following the provisions of the 1999/5/EC Directives.
